Ported over the promisc and verbose mode functions
from v2 of the queue start/stop suite to use for the
VLAN suite. Tweaked some of the verification methods to be
more concise, changed some docstrings to be more specific.
Signed-off-by: Dean Marx <dm...@iol.unh.edu>
---
dts/framework/remote_session/testpmd_shell.py | 260 ++++++++++++++++++
1 file changed, 260 insertions(+)
diff --git a/dts/framework/remote_session/testpmd_shell.py
b/dts/framework/remote_session/testpmd_shell.py
index cb2ab6bd00..aad3a3a448 100644
--- a/dts/framework/remote_session/testpmd_shell.py
+++ b/dts/framework/remote_session/testpmd_shell.py
@@ -225,6 +225,266 @@ def set_forward_mode(self, mode: TestPmdForwardingModes,
verify: bool = True):
f"Test pmd failed to set fwd mode to {mode.value}"
)
+ def vlan_filter_set_on(self, port: int, verify: bool = True):
+ """Set vlan filter on.
+
+ Args:
+ port: The port number to use, should be within 0-32.
+ verify: If :data:`True`, the output of the command is scanned to
verify that
+ vlan filtering was enabled successfully. If not, it is
+ considered an error.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
the filter
+ fails to update.
+ """
+ filter_cmd_output = self.send_command(f"vlan set filter on {port}")
+ if verify:
+ if "Invalid port" in filter_cmd_output or "filter: on" not in
self.send_command(f"show port info {port}"):
+ self._logger.debug(f"Failed to enable vlan filter on port
{port}: \n{filter_cmd_output}")
+ raise InteractiveCommandExecutionError(f"Testpmd failed to
enable vlan filter on port {port}.")
+
+ def vlan_filter_set_off(self, port: int, verify: bool = True):
+ """Set vlan filter off.
+
+ Args:
+ port: The port number to use, should be within 0-32.
+ verify: If :data:`True`, the output of the command is scanned to
verify that
+ vlan filtering was disabled successfully. If not, it is
+ considered an error.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
the filter
+ fails to update.
+ """
+ filter_cmd_output = self.send_command(f"vlan set filter off {port}")
+ if verify:
+ if "Invalid port" in filter_cmd_output or "filter: off" not in
self.send_command(f"show port info {port}"):
+ self._logger.debug(f"Failed to disable vlan filter on port
{port}: \n{filter_cmd_output}")
+ raise InteractiveCommandExecutionError(f"Testpmd failed to
disable vlan filter on port {port}.")
+
+ def rx_vlan_add(self, vlan: int, port: int, verify: bool = True):
+ """Add specified vlan tag to the filter list on a port.
+
+ Args:
+ vlan: The vlan tag to add, should be within 1-1005, 1-4094
extended.
+ port: The port number to add the tag on, should be within 0-32.
+ verify: If :data:`True`, the output of the command is scanned to
verify that
+ the vlan tag was added to the filter list on the specified
port. If not, it is
+ considered an error.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
the tag
+ is not added.
+ """
+ vlan_add_output = self.send_command(f"rx_vlan add {vlan} {port}")
+ if verify:
+ if "VLAN-filtering disabled" in vlan_add_output or "Invalid
vlan_id" in vlan_add_output:
+ self._logger.debug(f"Failed to add vlan tag {vlan} on port
{port}: \n{vlan_add_output}")
+ raise InteractiveCommandExecutionError(f"Testpmd failed to add
vlan tag {vlan} on port {port}.")
+
+ def rx_vlan_rm(self, vlan: int, port: int, verify: bool = True):
+ """Remove specified vlan tag from filter list on a port.
+
+ Args:
+ vlan: The vlan tag to remove, should be within 1-4094.
+ port: The port number to remove the tag from, should be within
0-32.
+ verify: If :data:`True`, the output of the command is scanned to
verify that
+ the vlan tag was removed from the filter list on the specified
port. If not, it is
+ considered an error.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
the tag
+ is not removed.
+ """
+ vlan_rm_output = self.send_command(f"rx_vlan rm {vlan} {port}")
+ if verify:
+ if "VLAN-filtering disabled" in vlan_rm_output or "Invalid
vlan_id" in vlan_rm_output:
+ self._logger.debug(f"Failed to remove vlan tag {vlan} on port
{port}: \n{vlan_rm_output}")
+ raise InteractiveCommandExecutionError(f"Testpmd failed to
remove vlan tag {vlan} on port {port}.")
+
+ def vlan_strip_set_on(self, port: int, verify: bool = True):
+ """Enable vlan stripping on the specified port.
+
+ Args:
+ port: The port number to use, should be within 0-32.
+ verify: If :data:`True`, the output of the command is scanned to
verify that
+ vlan stripping was enabled on the specified port. If not, it is
+ considered an error.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
stripping
+ fails to update.
+ """
+ vlan_strip_output = self.send_command(f"vlan set strip on {port}")
+ if verify:
+ if "strip on" not in self.send_command(f"show port info {port}"):
+ self._logger.debug(f"Failed to set vlan filter on for port
{port}: \n{vlan_strip_output}")
+ raise InteractiveCommandExecutionError(f"Testpmd failed to set
vlan filter on for port {port}.")
+
+ def vlan_strip_set_off(self, port: int, verify: bool = True):
+ """Disable vlan stripping on the specified port.
+
+ Args:
+ port: The port number to use, should be within 0-32
+ verify: If :data:`True`, the output of the command is scanned to
verify that
+ vlan stripping was disabled on the specified port. If not, it
is
+ considered an error.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
stripping
+ fails to update.
+ """
+ vlan_strip_output = self.send_command(f"vlan set strip off {port}")
+ if verify:
+ if "strip off" not in self.send_command(f"show port info {port}"):
+ self._logger.debug(f"Failed to disable vlan stripping on port
{port}: \n{vlan_strip_output}")
+ raise InteractiveCommandExecutionError(f"Testpmd failed to
disable vlan stripping on port {port}.")
+
+ def port_stop_all(self, verify: bool = True):
+ """Stop all ports.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
all ports
+ fail to stop."""
+ port_output = self.send_command("port stop all")
+ if verify:
+ if "Done" not in port_output:
+ self._logger.debug(f"Failed to stop all ports:
\n{port_output}")
+ raise InteractiveCommandExecutionError("Testpmd failed to stop
all ports.")
+
+ def port_stop(self, port: int, verify: bool = True):
+ """Stop all ports.
+
+ Args:
+ port: specifies the port number to use, must be between 0-32
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
the port
+ is not stopped."""
+ port_output = self.send_command(f"port stop {port}")
+ if verify:
+ if "Done" not in port_output:
+ self._logger.debug(f"Failed to stop port {port}:
\n{port_output}")
+ raise InteractiveCommandExecutionError(f"Testpmd failed to
stop port {port}.")
+
+ def port_start_all(self, verify: bool = True):
+ """Start all ports.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
all ports
+ fail to start."""
+ port_output = self.send_command("port start all")
+ if verify:
+ if "Done" not in port_output:
+ self._logger.debug(f"Failed to start all ports:
\n{port_output}")
+ raise InteractiveCommandExecutionError("Testpmd failed to
start all ports.")
+
+ def port_start(self, port: int, verify: bool = True):
+ """Stop all ports.
+
+ Args:
+ port: specifies the port number to use, must be between 0-32
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
the port
+ is not started."""
+ port_output = self.send_command(f"port start {port}")
+ if verify:
+ if "Done" not in port_output:
+ self._logger.debug(f"Failed to start port {port}:
\n{port_output}")
+ raise InteractiveCommandExecutionError(f"Testpmd failed to
start port {port}.")
+
+
+ def tx_vlan_set(self, port: int, vlan: int, verify: bool = True):
+ """Set hardware insertion of vlan tags in packets sent on a port.
+
+ Args:
+ port: The port number to use, should be within 0-32.
+ vlan: The vlan tag to insert, should be within 1-4094.
+ verify: If :data:`True`, the output of the command is scanned to
verify that
+ vlan insertion was enabled on the specified port. If not, it is
+ considered an error.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
the insertion
+ tag is not set.
+ """
+ vlan_insert_output = self.send_command(f"tx_vlan set {port} {vlan}")
+ if verify:
+ if ("Please stop port" in vlan_insert_output or "Invalid vlan_id"
in vlan_insert_output
+ or "Invalid port" in vlan_insert_output):
+ self._logger.debug(f"Failed to set vlan insertion tag {vlan}
on port {port}: \n{vlan_insert_output}")
+ raise InteractiveCommandExecutionError(f"Testpmd failed to set
vlan insertion tag {vlan} on port {port}.")
+
+ def tx_vlan_reset(self, port: int, verify: bool = True):
+ """Disable hardware insertion of vlan tags in packets sent on a port.
+
+ Args:
+ port: The port number to use, should be within 0-32.
+ verify: If :data:`True`, the output of the command is scanned to
verify that
+ vlan insertion was disabled on the specified port. If not, it
is
+ considered an error.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
the insertion
+ tag is not reset.
+ """
+ vlan_insert_output = self.send_command(f"tx_vlan set {port}")
+ if verify:
+ if "Please stop port" in vlan_insert_output or "Invalid port" in
vlan_insert_output:
+ self._logger.debug(f"Failed to reset vlan insertion on port
{port}: \n{vlan_insert_output}")
+ raise InteractiveCommandExecutionError(f"Testpmd failed to
reset vlan insertion on port {port}.")
+
+ def set_promisc(self, port: int, on: bool, verify: bool = True):
+ """Turns promiscuous mode on/off for the specified port
+
+ Args:
+ port: port number to use, should be within 0-32.
+ on: if :data:`True`, turn promisc mode on, otherwise turn off.
+ verify: if :data:`True` an additional command will be sent to
verify that promisc mode
+ is properly set. Defaults to :data:`True`.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
promisc mode
+ is not correctly set.
+ """
+ if on:
+ promisc_output = self.send_command(f"set promisc {port} on")
+ else:
+ promisc_output = self.send_command(f"set promisc {port} off")
+ if verify:
+ if (on and "Promiscuous mode: enabled" not in
+ self.send_command(f"show port info {port}")):
+ self._logger.debug(f"Failed to set promisc mode on port
{port}: \n{promisc_output}")
+ raise InteractiveCommandExecutionError(f"Testpmd failed to set
promisc mode on port {port}.")
+ elif (not on and "Promiscuous mode: disabled" not in
+ self.send_command(f"show port info {port}")):
+ self._logger.debug(f"Failed to set promisc mode on port
{port}: \n{promisc_output}")
+ raise InteractiveCommandExecutionError(f"Testpmd failed to set
promisc mode on port {port}.")
+
+
+ def set_verbose(self, level: int, verify: bool = True):
+ """Set debug verbosity level.
+
+ Args:
+ level: 0 - silent except for error
+ 1 - fully verbose except for Tx packets
+ 2 - fully verbose except for Rx packets
+ >2 - fully verbose
+ verify: if :data:`True` an additional command will be sent to
verify that verbose level
+ is properly set. Defaults to :data:`True`.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
verbose level
+ is not correctly set.
+ """
+ verbose_output = self.send_command(f"set verbose {level}")
+ if verify:
+ if "Change verbose level" not in verbose_output:
+ self._logger.debug(f"Failed to set verbose level to {level}:
\n{verbose_output}")
+ raise InteractiveCommandExecutionError(f"Testpmd failed to set
verbose level to {level}.")
+
def close(self) -> None:
"""Overrides :meth:`~.interactive_shell.close`."""
self.send_command("quit", "")
--
2.44.0
