Hi Mark,
> -----Original Message-----
> From: Chen, Jing D
> Sent: Thursday, October 29, 2015 1:28 PM
> To: Liang, Cunming; dev at dpdk.org
> Cc: Tao, Zhe; He, Shaopeng; Ananyev, Konstantin; Richardson, Bruce
> Subject: RE: [PATCH v3 08/16] fm10k: add Vector RX scatter function
>
> Hi, Steve,
>
> Best Regards,
> Mark
>
>
> > -----Original Message-----
> > From: Liang, Cunming
> > Sent: Wednesday, October 28, 2015 10:30 PM
> > To: Chen, Jing D; dev at dpdk.org
> > Cc: Tao, Zhe; He, Shaopeng; Ananyev, Konstantin; Richardson, Bruce
> > Subject: Re: [PATCH v3 08/16] fm10k: add Vector RX scatter function
> >
> > Hi Mark,
> >
> > On 10/27/2015 5:46 PM, Chen Jing D(Mark) wrote:
> > > From: "Chen Jing D(Mark)" <jing.d.chen at intel.com>
> > >
> > > Add func fm10k_recv_scattered_pkts_vec to receive chained packets
> > > with SSE instructions.
> > >
> > > Signed-off-by: Chen Jing D(Mark) <jing.d.chen at intel.com>
> > > ---
> > > drivers/net/fm10k/fm10k.h | 2 +
> > > drivers/net/fm10k/fm10k_rxtx_vec.c | 88
> > ++++++++++++++++++++++++++++++++++++
> > > 2 files changed, 90 insertions(+), 0 deletions(-)
> > >
> > > diff --git a/drivers/net/fm10k/fm10k.h b/drivers/net/fm10k/fm10k.h
> > > index 1502ae3..06697fa 100644
> > > --- a/drivers/net/fm10k/fm10k.h
> > > +++ b/drivers/net/fm10k/fm10k.h
> > > @@ -329,4 +329,6 @@ uint16_t fm10k_xmit_pkts(void *tx_queue, struct
> > rte_mbuf **tx_pkts,
> > > int fm10k_rxq_vec_setup(struct fm10k_rx_queue *rxq);
> > > int fm10k_rx_vec_condition_check(struct rte_eth_dev *);
> > > uint16_t fm10k_recv_pkts_vec(void *, struct rte_mbuf **, uint16_t);
> > > +uint16_t fm10k_recv_scattered_pkts_vec(void *, struct rte_mbuf **,
> > > + uint16_t);
> > > #endif
> > > diff --git a/drivers/net/fm10k/fm10k_rxtx_vec.c
> > b/drivers/net/fm10k/fm10k_rxtx_vec.c
> > > index 2e6f1a2..3fd5d45 100644
> > > --- a/drivers/net/fm10k/fm10k_rxtx_vec.c
> > > +++ b/drivers/net/fm10k/fm10k_rxtx_vec.c
> > > @@ -513,3 +513,91 @@ fm10k_recv_pkts_vec(void *rx_queue, struct
> > rte_mbuf **rx_pkts,
> > > {
> > > return fm10k_recv_raw_pkts_vec(rx_queue, rx_pkts, nb_pkts,
> > NULL);
> > > }
> > > +
> > > +static inline uint16_t
> > > +fm10k_reassemble_packets(struct fm10k_rx_queue *rxq,
> > > + struct rte_mbuf **rx_bufs,
> > > + uint16_t nb_bufs, uint8_t *split_flags)
> > > +{
> > > + struct rte_mbuf *pkts[RTE_FM10K_MAX_RX_BURST]; /*finished
> > pkts*/
> > > + struct rte_mbuf *start = rxq->pkt_first_seg;
> > > + struct rte_mbuf *end = rxq->pkt_last_seg;
> > > + unsigned pkt_idx, buf_idx;
> > > +
> > > +
> > > + for (buf_idx = 0, pkt_idx = 0; buf_idx < nb_bufs; buf_idx++) {
> > > + if (end != NULL) {
> > > + /* processing a split packet */
> > > + end->next = rx_bufs[buf_idx];
> > > + start->nb_segs++;
> > > + start->pkt_len += rx_bufs[buf_idx]->data_len;
> > > + end = end->next;
> > > +
> > > + if (!split_flags[buf_idx]) {
> > > + /* it's the last packet of the set */
> > > + start->hash = end->hash;
> > > + start->ol_flags = end->ol_flags;
> > > + pkts[pkt_idx++] = start;
> > > + start = end = NULL;
> > > + }
> > > + } else {
> > > + /* not processing a split packet */
> > > + if (!split_flags[buf_idx]) {
> > > + /* not a split packet, save and skip */
> > > + pkts[pkt_idx++] = rx_bufs[buf_idx];
> > > + continue;
> > > + }
> > > + end = start = rx_bufs[buf_idx];
> > > + }
> > I guess you forgot to consider the crc_len during processing. /Steve
>
> In fm10k, crc is always be stripped and pkt_len/data_len carried actual
> data length. So, we needn't add crc_len back here. This is a little different
> from IXGBE.
Ok, that's fine. /Steve
