Hi Jan, > -----Original Message----- > From: Jan Viktorin [mailto:viktorin at rehivetech.com] > Sent: Wednesday, October 28, 2015 11:00 AM > To: Ananyev, Konstantin > Cc: dev at dpdk.org > Subject: Fw: |ERROR| pw 8090-8106 acl: handle when SSE 4.1 is unsupported > > Hello Konstantin, > > the ACL patch (with changes as you suggested yesterday) breaks the > following test. I am confused about this. There is nothing in the log > that would help me to determine the source of the problem. How is this > test related to ACL? Moreover, I cannot see the actual packet drop > there, what packet has been dropped?
I am also confused - testpmd doesn't use librte_acl at all. Are there any other changes in your patch set? Something related to vector instrincts emulation? As they are now in rte_vect.h and are seen not only by LPM ilbrary? Probably someone from STC team can explain what exactly packet fails? Konstantin > > Regards > Jan > > Begin forwarded message: > > Date: 27 Oct 2015 13:44:40 -0700 > From: sys_stv at intel.com > To: test-report at dpdk.org,viktorin at rehivetech.com > Subject: |ERROR| pw 8090-8106 acl: handle when SSE 4.1 is unsupported > > > Test-Label: Intel Niantic on Fedora > Test-Status: ERROR > Patchwork: http://www.dpdk.org/dev/patchwork/patch/8106/ > > DPDK git baseline: affc455438f4cbd3b14e2d9a24fbc154e22d68d3 > Patchwork ID: 8090-8106 > http://www.dpdk.org/dev/patchwork/patch/8106/ > Submitter: Jan Viktorin <viktorin at rehivetech.com> > Date: Tue, 27 Oct 2015 20:13:49 +0100 > > Compilation: > OS: fedora > Nic: niantic > i686-native-linuxapp-gcc: compile pass > x86_64-native-linuxapp-gcc: compile pass > > DTS validation: > OS: fedora > Nic: Niantic > TestType: auto > GCC: 4 > x86_64-native-linuxapp-gcc: total 75, passed 74, failed 1. > Failed Case List: > Target: x86_64-native-linuxapp-gcc > OS: fedora > Failed DTS case: > checksum_offload_with_vlan: > http://dpdk.org/browse/tools/dts/tree/test_plans/checksum_offload_test_plan.rst > > DTS Validation Error: > ====================================================================================================== > ================== > ====================================================================================================== > ================== > TEST SUITE : TestChecksumOffload > > ------------------------------------------------------------------------------- > Begin: Test Casetest_checksum_offload_with_vlan > -------------------------------------------------- > FAILED 'Unexpected Packets Drop' > -------------------------------------------------- > [ SUITE_DUT_CMD] ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n > 4 -- -i --portmask=0x3 --disable-hw-vlan --enable-rx-cksum --crc-strip > --txqflags=0 [ SUITE_DUT_CMD] set verbose 1 [ SUITE_DUT_CMD] set > fwd csum [ SUITE_DUT_CMD] csum set ip hw 0 > [ SUITE_DUT_CMD] csum set udp hw 0 > [ SUITE_DUT_CMD] csum set tcp hw 0 > [ SUITE_DUT_CMD] csum set sctp hw 0 > [ SUITE_DUT_CMD] csum set ip hw 1 > [ SUITE_DUT_CMD] csum set udp hw 1 > [ SUITE_DUT_CMD] csum set tcp hw 1 > [ SUITE_DUT_CMD] csum set sctp hw 1 > [ SUITE_DUT_CMD] start > [SUITE_TESTER_CMD] scapy > [SUITE_TESTER_CMD] sys.path.append("./") > [SUITE_TESTER_CMD] from sctp import * > [SUITE_TESTER_CMD] p = Ether(dst="90:e2:ba:4a:54:81", > src="52:00:00:00:00:00")/IPv6(src="::2")/UDP()/("X"*46) > [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p = > Ether(dst="90:e2:ba:4a:54:81", > src="52:00:00:00:00:00")/IP(src="127.0.0.2")/SCTP()/("X"*48) > [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p = > Ether(dst="90:e2:ba:4a:54:81", > src="52:00:00:00:00:00")/IPv6(src="::2")/TCP()/("X"*46) > [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p = > Ether(dst="90:e2:ba:4a:54:81", > src="52:00:00:00:00:00")/IP(src="127.0.0.2")/UDP()/("X"*46) > [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] p = > Ether(dst="90:e2:ba:4a:54:81", > src="52:00:00:00:00:00")/IP(src="127.0.0.2")/TCP()/("X"*46) > [SUITE_TESTER_CMD] p.show2() [SUITE_TESTER_CMD] exit() > [SUITE_TESTER_CMD] echo -n '' > scapyResult.txt [SUITE_TESTER_CMD] > scp sniff.py root at 10.239.128.80:~/ [SUITE_TESTER_CMD] SCAPY Receive > setup: [SUITE_TESTER_CMD] killall scapy 2>/dev/null; echo tester > [SUITE_TESTER_CMD] scapy [SUITE_TESTER_CMD] subprocess.call("scapy -c > sniff.py &", shell=True) [SUITE_TESTER_CMD] sys.path.append("./") > [SUITE_TESTER_CMD] import sctp [SUITE_TESTER_CMD] from sctp import * > [SUITE_TESTER_CMD] sendp([Ether(dst="90:e2:ba:4a:54:81", > src="52:00:00:00:00:00")/IPv6(src="::1")/UDP(chksum=0xf)/("X"*46)], > iface="p785p2") [SUITE_TESTER_CMD] > sendp([Ether(dst="90:e2:ba:4a:54:81", > src="52:00:00:00:00:00")/IP(chksum=0x0)/SCTP(chksum=0xf)/("X"*48)], > iface="p785p2") [SUITE_TESTER_CMD] > sendp([Ether(dst="90:e2:ba:4a:54:81", > src="52:00:00:00:00:00")/IPv6(src="::1")/TCP(chksum=0xf)/("X"*46)], > iface="p785p2") [SUITE_TESTER_CMD] > sendp([Ether(dst="90:e2:ba:4a:54:81", > src="52:00:00:00:00:00")/IP(chksum=0x0)/UDP(chksum=0xf)/("X"*46)], > iface="p785p2") [SUITE_TESTER_CMD] > sendp([Ether(dst="90:e2:ba:4a:54:81", > src="52:00:00:00:00:00")/IP(chksum=0x0)/TCP(chksum=0xf)/("X"*46)], > iface="p785p2") [SUITE_TESTER_CMD] exit() [SUITE_TESTER_CMD] cat > scapyResult.txt [SUITE_TESTER_CMD] SCAPY Result: End > test_checksum_offload_with_vlan > ------------------------------------------------------------------------------- > [SUITE_DUT_CMD] quit > > > > DPDK STV team > > > -- > Jan Viktorin E-mail: Viktorin at RehiveTech.com > System Architect Web: www.RehiveTech.com > RehiveTech > Brno, Czech Republic
