NIC adapters can support speeds with different lanes configuration. This patchset will allow users: - get the Lanes capability per speed supported by the ethernet controller. - set the lanes configuration using a new CLI - Display the user configured lanes -- v1->v2
Added speed lanes capability and display on testpmd shell. testpmd> show port 0 speed_lanes capabilities Supported speeds Valid lanes ----------------------------------- 10 Gbps 1 25 Gbps 1 40 Gbps 4 50 Gbps 1 2 100 Gbps 1 2 4 200 Gbps 2 4 400 Gbps 4 8 testpmd> Damodharam Ammepalli (4): lib/ethdev: Add link_speed lanes support into rte lib testpmd: Add speed lanes to testpmd config and show command lib/ethdev: add support for displaying lanes capability testpmd: add support for displaying lanes capability app/test-pmd/cmdline.c | 270 +++++++++++++++++++++++++++++++++++++ app/test-pmd/config.c | 13 +- lib/ethdev/ethdev_driver.h | 70 ++++++++++ lib/ethdev/rte_ethdev.c | 39 ++++++ lib/ethdev/rte_ethdev.h | 84 ++++++++++++ lib/ethdev/version.map | 3 + 6 files changed, 475 insertions(+), 4 deletions(-) -- 2.39.3 -- This electronic communication and the information and any files transmitted with it, or attached to it, are confidential and are intended solely for the use of the individual or entity to whom it is addressed and may contain information that is confidential, legally privileged, protected by privacy laws, or otherwise restricted from disclosure to anyone else. If you are not the intended recipient or the person responsible for delivering the e-mail to the intended recipient, you are hereby notified that any use, copying, distributing, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited. If you received this e-mail in error, please return the e-mail to the sender, delete it from your computer, and destroy any printed copy of it.
