Add support for read/write/clear operations on alternate structure.
Signed-off-by: Anatoly Burakov <anatoly.bura...@intel.com>
---
drivers/net/ixgbe/base/ixgbe_e610.c | 132 ++++++++++++++++++++++++++++
drivers/net/ixgbe/base/ixgbe_e610.h | 9 ++
2 files changed, 141 insertions(+)
diff --git a/drivers/net/ixgbe/base/ixgbe_e610.c
b/drivers/net/ixgbe/base/ixgbe_e610.c
index f3c80fa150..e412345c28 100644
--- a/drivers/net/ixgbe/base/ixgbe_e610.c
+++ b/drivers/net/ixgbe/base/ixgbe_e610.c
@@ -2893,6 +2893,138 @@ s32 ixgbe_read_flat_nvm(struct ixgbe_hw *hw, u32
offset, u32 *length,
return status;
}
+/**
+ * ixgbe_aci_alternate_write - write to alternate structure
+ * @hw: pointer to the hardware structure
+ * @reg_addr0: address of first dword to be written
+ * @reg_val0: value to be written under 'reg_addr0'
+ * @reg_addr1: address of second dword to be written
+ * @reg_val1: value to be written under 'reg_addr1'
+ *
+ * Write one or two dwords to alternate structure using ACI command (0x0900).
+ * Fields are indicated by 'reg_addr0' and 'reg_addr1' register numbers.
+ *
+ * Return: 0 on success and error code on failure.
+ */
+s32 ixgbe_aci_alternate_write(struct ixgbe_hw *hw, u32 reg_addr0,
+ u32 reg_val0, u32 reg_addr1, u32 reg_val1)
+{
+ struct ixgbe_aci_cmd_read_write_alt_direct *cmd;
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ cmd = &desc.params.read_write_alt_direct;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_write_alt_direct);
+ cmd->dword0_addr = IXGBE_CPU_TO_LE32(reg_addr0);
+ cmd->dword1_addr = IXGBE_CPU_TO_LE32(reg_addr1);
+ cmd->dword0_value = IXGBE_CPU_TO_LE32(reg_val0);
+ cmd->dword1_value = IXGBE_CPU_TO_LE32(reg_val1);
+
+ status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+
+ return status;
+}
+
+/**
+ * ixgbe_aci_alternate_read - read from alternate structure
+ * @hw: pointer to the hardware structure
+ * @reg_addr0: address of first dword to be read
+ * @reg_val0: pointer for data read from 'reg_addr0'
+ * @reg_addr1: address of second dword to be read
+ * @reg_val1: pointer for data read from 'reg_addr1'
+ *
+ * Read one or two dwords from alternate structure using ACI command (0x0902).
+ * Fields are indicated by 'reg_addr0' and 'reg_addr1' register numbers.
+ * If 'reg_val1' pointer is not passed then only register at 'reg_addr0'
+ * is read.
+ *
+ * Return: 0 on success and error code on failure.
+ */
+s32 ixgbe_aci_alternate_read(struct ixgbe_hw *hw, u32 reg_addr0,
+ u32 *reg_val0, u32 reg_addr1, u32 *reg_val1)
+{
+ struct ixgbe_aci_cmd_read_write_alt_direct *cmd;
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ cmd = &desc.params.read_write_alt_direct;
+
+ if (!reg_val0)
+ return IXGBE_ERR_PARAM;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_read_alt_direct);
+ cmd->dword0_addr = IXGBE_CPU_TO_LE32(reg_addr0);
+ cmd->dword1_addr = IXGBE_CPU_TO_LE32(reg_addr1);
+
+ status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+
+ if (status == IXGBE_SUCCESS) {
+ *reg_val0 = IXGBE_LE32_TO_CPU(cmd->dword0_value);
+
+ if (reg_val1)
+ *reg_val1 = IXGBE_LE32_TO_CPU(cmd->dword1_value);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_aci_alternate_write_done - check if writing to alternate structure
+ * is done
+ * @hw: pointer to the HW structure.
+ * @bios_mode: indicates whether the command is executed by UEFI or legacy BIOS
+ * @reset_needed: indicates the SW should trigger GLOBAL reset
+ *
+ * Indicates to the FW that alternate structures have been changed.
+ *
+ * Return: 0 on success and error code on failure.
+ */
+s32 ixgbe_aci_alternate_write_done(struct ixgbe_hw *hw, u8 bios_mode,
+ bool *reset_needed)
+{
+ struct ixgbe_aci_cmd_done_alt_write *cmd;
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ cmd = &desc.params.done_alt_write;
+
+ if (!reset_needed)
+ return IXGBE_ERR_PARAM;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_done_alt_write);
+ cmd->flags = bios_mode;
+
+ status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+ if (!status)
+ *reset_needed = (IXGBE_LE16_TO_CPU(cmd->flags) &
+ IXGBE_ACI_RESP_RESET_NEEDED) != 0;
+
+ return status;
+}
+
+/**
+ * ixgbe_aci_alternate_clear - clear alternate structure
+ * @hw: pointer to the HW structure.
+ *
+ * Clear the alternate structures of the port from which the function
+ * is called.
+ *
+ * Return: 0 on success and error code on failure.
+ */
+s32 ixgbe_aci_alternate_clear(struct ixgbe_hw *hw)
+{
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc,
+ ixgbe_aci_opc_clear_port_alt_write);
+
+ status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+
+ return status;
+}
+
/**
* ixgbe_aci_get_internal_data - get internal FW/HW data
* @hw: pointer to the hardware structure
diff --git a/drivers/net/ixgbe/base/ixgbe_e610.h
b/drivers/net/ixgbe/base/ixgbe_e610.h
index d45ea73030..48bd35b647 100644
--- a/drivers/net/ixgbe/base/ixgbe_e610.h
+++ b/drivers/net/ixgbe/base/ixgbe_e610.h
@@ -87,6 +87,15 @@ s32 ixgbe_read_sr_word_aci(struct ixgbe_hw *hw, u16 offset,
u16 *data);
s32 ixgbe_read_sr_buf_aci(struct ixgbe_hw *hw, u16 offset, u16 *words, u16
*data);
s32 ixgbe_read_flat_nvm(struct ixgbe_hw *hw, u32 offset, u32 *length,
u8 *data, bool read_shadow_ram);
+
+s32 ixgbe_aci_alternate_write(struct ixgbe_hw *hw, u32 reg_addr0,
+ u32 reg_val0, u32 reg_addr1, u32 reg_val1);
+s32 ixgbe_aci_alternate_read(struct ixgbe_hw *hw, u32 reg_addr0,
+ u32 *reg_val0, u32 reg_addr1, u32 *reg_val1);
+s32 ixgbe_aci_alternate_write_done(struct ixgbe_hw *hw, u8 bios_mode,
+ bool *reset_needed);
+s32 ixgbe_aci_alternate_clear(struct ixgbe_hw *hw);
+
s32 ixgbe_aci_get_internal_data(struct ixgbe_hw *hw, u16 cluster_id,
u16 table_id, u32 start, void *buf,
u16 buf_size, u16 *ret_buf_size,
--
2.43.0
