I'm terribly sorry for the delay in review. I'll try to get to it in
the next 2 days.
On Thu, May 2, 2024 at 4:44 PM Daniel Gregory
<daniel.greg...@bytedance.com> wrote:
>
> The zawrs extension adds a pair of instructions that stall a core until
> a memory location is written to. This patch uses one of them to
> implement RISCV-specific versions of the rte_wait_until_equal_*
> functions. This is potentially more energy efficient than the default
> implementation that uses rte_pause/Zihintpause.
>
> The technique works as follows:
>
> * Create a reservation set containing the address we want to wait on
> using an atomic load (lr.dw)
> * Call wrs.nto - this blocks until the reservation set is invalidated by
> someone else writing to that address
> * Execution can also resume arbitrarily, so we still need to check
> whether a change occurred and loop if not
>
> Due to RISC-V atomics only supporting naturally aligned word (32 bit)
> and double word (64 bit) loads, I've used pointer rounding and bit
> shifting to implement waiting on 16-bit values.
>
> This new functionality is controlled by a Meson flag that is disabled by
> default.
>
> Signed-off-by: Daniel Gregory <daniel.greg...@bytedance.com>
> Suggested-by: Punit Agrawal <punit.agra...@bytedance.com>
> ---
>
> Posting as an RFC to get early feedback and enable testing by others
> with Zawrs-enabled hardware. Whilst I have been able to test it compiles
> & passes tests using QEMU, I am waiting on some Zawrs-enabled hardware
> to become available before I carry out performance tests.
>
> Nonetheless, I would be glad to hear any feedback on the general
> approach. Thanks, Daniel
>
> config/riscv/meson.build | 5 ++
> lib/eal/riscv/include/rte_pause.h | 139 ++++++++++++++++++++++++++++++
> 2 files changed, 144 insertions(+)
>
> diff --git a/config/riscv/meson.build b/config/riscv/meson.build
> index 07d7d9da23..4cfdc42ecb 100644
> --- a/config/riscv/meson.build
> +++ b/config/riscv/meson.build
> @@ -26,6 +26,11 @@ flags_common = [
> # read from /proc/device-tree/cpus/timebase-frequency. This property is
> # guaranteed on Linux, as riscv time_init() requires it.
> ['RTE_RISCV_TIME_FREQ', 0],
> +
> + # Enable use of RISC-V Wait-on-Reservation-Set extension (Zawrs)
> + # Mitigates looping when polling on memory locations
> + # Make sure to add '_zawrs' to your target's -march below
> + ['RTE_RISCV_ZAWRS', false]
> ]
>
> ## SoC-specific options.
> diff --git a/lib/eal/riscv/include/rte_pause.h
> b/lib/eal/riscv/include/rte_pause.h
> index cb8e9ca52d..e7b43dffa3 100644
> --- a/lib/eal/riscv/include/rte_pause.h
> +++ b/lib/eal/riscv/include/rte_pause.h
> @@ -11,6 +11,12 @@
> extern "C" {
> #endif
>
> +#ifdef RTE_RISCV_ZAWRS
> +#define RTE_WAIT_UNTIL_EQUAL_ARCH_DEFINED
> +#endif
> +
> +#include <rte_debug.h>
> +
> #include "rte_atomic.h"
>
> #include "generic/rte_pause.h"
> @@ -24,6 +30,139 @@ static inline void rte_pause(void)
> asm volatile(".int 0x0100000F" : : : "memory");
> }
>
> +#ifdef RTE_RISCV_ZAWRS
> +
> +/*
> + * Atomic load from an address, it returns either a sign-extended word or
> + * doubleword and creates a 'reservation set' containing the read memory
> + * location. When someone else writes to the reservation set, it is
> invalidated,
> + * causing any stalled WRS instructions to resume.
> + *
> + * Address needs to be naturally aligned.
> + */
> +#define __RTE_RISCV_LR_32(src, dst, memorder) do { \
> + if ((memorder) == rte_memory_order_relaxed) { \
> + asm volatile("lr.w %0, (%1)" \
> + : "=r" (dst) \
> + : "r" (src) \
> + : "memory"); \
> + } else { \
> + asm volatile("lr.w.aq %0, (%1)" \
> + : "=r" (dst) \
> + : "r" (src) \
> + : "memory"); \
> + } } while (0)
> +#define __RTE_RISCV_LR_64(src, dst, memorder) do { \
> + if ((memorder) == rte_memory_order_relaxed) { \
> + asm volatile("lr.d %0, (%1)" \
> + : "=r" (dst) \
> + : "r" (src) \
> + : "memory"); \
> + } else { \
> + asm volatile("lr.d.aq %0, (%1)" \
> + : "=r" (dst) \
> + : "r" (src) \
> + : "memory"); \
> + } } while (0)
> +
> +/*
> + * There's not a RISC-V atomic load primitive for halfwords, so cast up to a
> + * _naturally aligned_ word and extract the halfword we want
> + */
> +#define __RTE_RISCV_LR_16(src, dst, memorder) do { \
> + uint32_t word; \
> + __RTE_RISCV_LR_32(((uintptr_t)(src) & (~3)), word, (memorder)); \
> + if ((size_t)(src) & 3) \
> + (dst) = (typeof(dst))(word >> 16); \
> + else \
> + (dst) = (typeof(dst))(word & 0xFFFF); \
> +} while (0)
> +
> +#define __RTE_RISCV_LR(src, dst, memorder, size) { \
> + RTE_BUILD_BUG_ON(size != 16 && size != 32 && size != 64); \
> + if (size == 16) \
> + __RTE_RISCV_LR_16(src, dst, memorder); \
> + else if (size == 32) \
> + __RTE_RISCV_LR_32(src, dst, memorder); \
> + else if (size == 64) \
> + __RTE_RISCV_LR_64(src, dst, memorder); \
> +}
> +
> +/*
> + * Wait-on-Reservation-Set extension instruction, it stalls execution until
> the
> + * reservation set is invalidated or an interrupt is observed.
> + * A loop is likely still needed as it may stop stalling arbitrarily.
> + */
> +#define __RTE_RISCV_WRS_NTO() { asm volatile("wrs.nto" : : : "memory"); }
> +
> +static __rte_always_inline void
> +rte_wait_until_equal_16(volatile uint16_t *addr, uint16_t expected,
> + int memorder)
> +{
> + uint16_t value;
> +
> + RTE_ASSERT(memorder == rte_memory_order_acquire ||
> + memorder == rte_memory_order_relaxed);
> + RTE_ASSERT(((size_t)addr & 1) == 0);
> +
> + __RTE_RISCV_LR_16(addr, value, memorder);
> + while (value != expected) {
> + __RTE_RISCV_WRS_NTO();
> + __RTE_RISCV_LR_16(addr, value, memorder);
> + }
> +}
> +
> +static __rte_always_inline void
> +rte_wait_until_equal_32(volatile uint32_t *addr, uint32_t expected,
> + int memorder)
> +{
> + uint32_t value;
> +
> + RTE_ASSERT(memorder == rte_memory_order_acquire ||
> + memorder == rte_memory_order_relaxed);
> + RTE_ASSERT(((size_t)addr & 3) == 0);
> +
> + __RTE_RISCV_LR_32(addr, value, memorder);
> + while (value != expected) {
> + __RTE_RISCV_WRS_NTO();
> + __RTE_RISCV_LR_32(addr, value, memorder);
> + }
> +}
> +
> +static __rte_always_inline void
> +rte_wait_until_equal_64(volatile uint64_t *addr, uint64_t expected,
> + int memorder)
> +{
> + uint64_t value;
> +
> + RTE_ASSERT(memorder == rte_memory_order_acquire ||
> + memorder == rte_memory_order_relaxed);
> + RTE_ASSERT(((size_t)addr & 7) == 0);
> +
> + __RTE_RISCV_LR_64(addr, value, memorder);
> + while (value != expected) {
> + __RTE_RISCV_WRS_NTO();
> + __RTE_RISCV_LR_64(addr, value, memorder);
> + }
> +}
> +
> +#define RTE_WAIT_UNTIL_MASKED(addr, mask, cond, expected, memorder) do { \
> + RTE_BUILD_BUG_ON(!__builtin_constant_p(memorder)); \
> + RTE_BUILD_BUG_ON(memorder != rte_memory_order_acquire && \
> + memorder != rte_memory_order_relaxed); \
> + RTE_ASSERT(((size_t)(addr) & (sizeof(*(addr)) - 1)) != 0); \
> + const uint32_t size = sizeof(*(addr)) << 3; \
> + typeof(*(addr)) expected_value = (expected); \
> + typeof(*(addr)) value; \
> + __RTE_RISCV_LR((addr), value, memorder, size); \
> + while (!((value & (mask)) cond expected_value)) { \
> + __RTE_RISCV_WRS_NTO(); \
> + __RTE_RISCV_LR((addr), value, memorder, size); \
> + } \
> +} while (0)
> +
> +#endif /* RTE_RISCV_ZAWRS */
> +
> #ifdef __cplusplus
> }
> #endif
> --
> 2.39.2
>
