https://bugs.dpdk.org/show_bug.cgi?id=1434
Bug ID: 1434
Summary: l3fwd: crashes in ACL mode for mixed traffic
Product: DPDK
Version: 24.03
Hardware: All
OS: All
Status: UNCONFIRMED
Severity: normal
Priority: Normal
Component: examples
Assignee: dev@dpdk.org
Reporter: konstantin.v.anan...@yandex.ru
Target Milestone: ---
When running l3fwd in ACL mode, if we'll have mix of IPv4/IPv6 packets in the
same burst,
It will most likely cause a crash. Something like:
#0 rte_eth_tx_burst (port_id=54, queue_id=0,
tx_pkts=0x4b249c0 <lcore_conf+550528>, nb_pkts=32)
at ../lib/ethdev/rte_ethdev.h:6437
#1 0x0000000000503c0d in send_burst (qconf=0x4b20d40 <lcore_conf+535040>,
n=32, port=54) at ../examples/l3fwd/l3fwd.h:129
#2 0x0000000000503ced in send_single_packet (
qconf=0x4b20d40 <lcore_conf+535040>, m=0x11fc70ba00, port=54)
at ../examples/l3fwd/l3fwd.h:152
#3 0x0000000000504138 in send_packets_single (
qconf=0x4b20d40 <lcore_conf+535040>, pkts=0x7ffff2f24070,
hops=0x7ffff2f23ab0, nb_tx=32) at ../examples/l3fwd/l3fwd_acl_scalar.h:77
#4 0x0000000000504286 in l3fwd_acl_send_packets (
qconf=0x4b20d40 <lcore_conf+535040>, pkts=0x7ffff2f24070,
res=0x7ffff2f23fe8, nb_tx=32) at ../examples/l3fwd/l3fwd_acl_scalar.h:106
#5 0x0000000000506870 in acl_main_loop (dummy=0x0)
#4 0x0000000000504286 in l3fwd_acl_send_packets (
qconf=0x4b20d40 <lcore_conf+535040>, pkts=0x7ffff2f24070,
res=0x7ffff2f23fe8, nb_tx=32) at ../examples/l3fwd/l3fwd_acl_scalar.h:106
106 send_packets_single(qconf, pkts, dst_port, nb_tx);
And the array of dst_port[] will contain some junk values:
(gdb) print dst_port
$7 = {0 <repeats 16 times>, 65535, 65535, 65535, 65535, 54, 65535, 65535,
65535, 65535, 65535, 65535, 32766, 58445, 65535, 65535, 65535}
And the reason for that is here:
acl_main_loop(__rte_unused void *dummy)
{
...
if (acl_search.num_ipv4) {
rte_acl_classify(
acl_config.acx_ipv4[socketid],
acl_search.data_ipv4,
acl_search.res_ipv4,
acl_search.num_ipv4,
DEFAULT_MAX_CATEGORIES);
l3fwd_acl_send_packets(
qconf,
pkts_burst,
acl_search.res_ipv4,
nb_rx);
...
I.E. we split our burst of packets into 2 arrays - one for ipv4, anoterh for
ipv6 for classify(),
But then we try to send all packets as one burst again, not taking into account
that acl_search.res_ipv4[] will be set only for ipv4 packets.
Same story for ipv6.
The fix is straightforward:
--- a/examples/l3fwd/l3fwd_acl.c
+++ b/examples/l3fwd/l3fwd_acl.c
@@ -1073,9 +1073,9 @@ acl_main_loop(__rte_unused void *dummy)
l3fwd_acl_send_packets(
qconf,
- pkts_burst,
+ acl_search.m_ipv4,
acl_search.res_ipv4,
- nb_rx);
+ acl_search.num_ipv4);
}
if (acl_search.num_ipv6) {
@@ -1088,9 +1088,9 @@ acl_main_loop(__rte_unused void *dummy)
l3fwd_acl_send_packets(
qconf,
- pkts_burst,
+ acl_search.m_ipv6,
acl_search.res_ipv6,
- nb_rx);
+ acl_search.num_ipv6);
}
--
You are receiving this mail because:
You are the assignee for the bug.
