Sorry, forgot the subject, add it. On Wed, Dec 6, 2023 at 7:30 PM Nini Gu <n...@redhat.com> wrote:
> Hello, > > I met the following issue when running dpdk-testpmd under the OpenShift > Virtualization environment recently. We did the test on 2 VFs, each passed > through to a VM, and they come from the same PF(XXV710) on the host. > However, it's found there are the following errors when I quit the test on > the receiver side. Does anyone familiar with these? Are these related to > the XXV710 card or something else? > > > *# dpdk-testpmd --socket-mem 256 --lcores 0,1 -n 1 -a 00:05:00.0 > --proc-type auto --file-prefix rx -- --forward-mode=rxonly > --port-topology=chained --disable-rss -i --rxq=1 --txq=1 --rxd=256 > --txd=256 --nb-cores=1 --auto-start* > > > > > > > > > > *EAL: Detected CPU lcores: 2EAL: Detected NUMA nodes: 1EAL: Auto-detected > process type: PRIMARYEAL: Detected shared linkage of DPDKEAL: Multi-process > socket /var/run/dpdk/rx/mp_socketEAL: Selected IOVA mode 'PA'EAL: VFIO > support initializedEAL: Using IOMMU type 8 (No-IOMMU)EAL: Probe PCI driver: > net_iavf (8086:154c) device: 0000:05:00.0 (socket -1)* > *......* > > > > *iavf_dev_init_vlan(): Failed to update vlan offloadiavf_dev_configure(): > configure VLAN failed: -95iavf_set_rx_function(): request RXDID[1] in > Queue[0] is legacy, set rx_pkt_burst as legacy for all queues* > *......* > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > *testpmd> quitTelling cores to stop...Waiting for lcores to finish... > ---------------------- Forward statistics for port 0 > ---------------------- RX-packets: 158837911 RX-dropped: 0 > RX-total: 158837911 TX-packets: 0 TX-dropped: 0 > TX-total: 0 > ---------------------------------------------------------------------------- > +++++++++++++++ Accumulated forward statistics for all > ports+++++++++++++++ RX-packets: 158837911 RX-dropped: 0 > RX-total: 158837911 TX-packets: 0 TX-dropped: 0 > TX-total: 0 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++Done.Stopping > port 0...Stopping ports...iavf_execute_vf_cmd(): Return failure -37 for cmd > 9iavf_disable_queues(): Failed to execute command of > OP_DISABLE_QUEUESiavf_stop_queues(): Fail to stop queuesiavf_stop_queues(): > Fail to stop queuesiavf_execute_vf_cmd(): No response for cmd > 11iavf_add_del_all_mac_addr(): fail to execute command > OP_DEL_ETHER_ADDRESSDoneShutting down port 0...Closing ports...Port 0 is > closedDone* > > Bye... > > Thanks in advance! > -- > Regards, > Nini Gu > -- Regards, Nini Gu
