On 11/24/23 14:13, Edwin Brossette wrote:
Hello again,
The flag is already set during the device init, so it should be removed,
not added.
I can confirm removing it fixed my issue.
I will submit a patch for this bug.
g
Great, thanks Edwin!
Don't forget to add the Fixes: tag and cc sta...@dpdk.org.
Maxime
Regards,
Edwin Brossette.
On Fri, Nov 24, 2023 at 11:39 AM Maxime Coquelin
<maxime.coque...@redhat.com <mailto:maxime.coque...@redhat.com>> wrote:
Hi Edwin,
Thanks for reporting the issue.
On 11/24/23 10:26, Olivier Matz wrote:
> Fix Maxime's mail.
Thanks Olivier.
> On Fri, Nov 24, 2023 at 10:18:27AM +0100, Edwin Brossette wrote:
>> Hello,
>>
>> I noticed a small inconsistency in the virtio pmd's xstats.
>> The stat "rx_q0_errors" appears twice.
>> I also think the stats "rx_q0_packets", "rx_q0_bytes",
"tx_q0_packets" and
>> "tx_q0_bytes" are duplicates of "rx_q0_good_packets",
"rx_q0_good_bytes",
>> "tx_q0_good_packets" and "tx_q0_good_bytes"
>>
>> I believe this issue probably appeared after this commit:
>>
>> f30e69b41f94: ethdev: add device flag to bypass auto-filled
queue xstats
>>
http://scm.6wind.com/vendor/dpdk.org/dpdk/commit/?id=f30e69b41f949cd4a9afb6ff39de196e661708e2
<http://scm.6wind.com/vendor/dpdk.org/dpdk/commit/?id=f30e69b41f949cd4a9afb6ff39de196e661708e2>
Adding Ferruh as he is the author of this commit.
>> From what I understand, the rxq0_error stat was originally
reported by the
>> librte. However, changes were made so it is reported by the pmd
instead.
>> The flag RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS was temporarily set
to keep the
>> old behaviour so that every pmd could have time to adapt the change.
>> But it seems the flag was forgotten in the virtio pmd and as a
result, some
>> stats are fetched at two different times when displaying xstats.
Have you tried adding this flag to Virtio PMD? Does it fixes the issue?
>> First in lib_rte_ethdev:
>> https://git.dpdk.org/dpdk/tree/lib/ethdev/rte_ethdev.c#n3266
<https://git.dpdk.org/dpdk/tree/lib/ethdev/rte_ethdev.c#n3266>
>> (you can see the check on the RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS
flag before
>> the snprintf on eth_dev_rxq_stats_strings[] )
>>
>> And a second time in the virtio pmd:
>>
https://git.dpdk.org/dpdk/tree/drivers/net/virtio/virtio_ethdev.c#n705
<https://git.dpdk.org/dpdk/tree/drivers/net/virtio/virtio_ethdev.c#n705> pmd
>> (see the snprintf on rte_virtio_rxq_stat_strings[] )
>>
>> This problem can be reproduced on testpmd simply by displaying
the xstats
>> on a port with the net_virtio driver:
>>
>> Reproduction:
>> ===========
>>
>> 1) start dpdk-testpmd:
>>
>> modprobe -a uio_pci_generic
>> dpdk-devbind -b uio_pci_generic 03:00.0
>> dpdk-devbind -b uio_pci_generic 04:00.0
>>
>> dpdk-devbind -s
>>
>> Network devices using DPDK-compatible driver
>> ============================================
>> 0000:03:00.0 'Virtio 1.0 network device 1041' drv=uio_pci_generic
>> unused=vfio-pci
>> 0000:04:00.0 'Virtio 1.0 network device 1041' drv=uio_pci_generic
>> unused=vfio-pci
>> [...]
>>
>> dpdk-testpmd -a 0000:03:00.0 -a 0000:04:00.0 -- -i --rxq=1 --txq=1
>> --coremask=0x4 --total-num-mbufs=250000
>> EAL: Detected CPU lcores: 3
>> EAL: Detected NUMA nodes: 1
>> EAL: Detected static linkage of DPDK
>> EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>> EAL: Selected IOVA mode 'PA'
>> EAL: VFIO support initialized
>> EAL: Probe PCI driver: net_virtio (1af4:1041) device:
0000:03:00.0 (socket
>> -1)
>> EAL: Probe PCI driver: net_virtio (1af4:1041) device:
0000:04:00.0 (socket
>> -1)
>> Interactive-mode selected
>> Warning: NUMA should be configured manually by using
--port-numa-config and
>> --ring-numa-config parameters along with --numa.
>> testpmd: create a new mbuf pool <mb_pool_0>: n=250000,
size=2176, socket=0
>> testpmd: preferred mempool ops selected: ring_mp_mc
>> Configuring Port 0 (socket 0)
>> Port 0: 52:54:00:B0:8F:88
>> Configuring Port 1 (socket 0)
>> Port 1: 52:54:00:EF:09:1F
>> Checking link statuses...
>> Done
>>
>> 2) port info:
>>
>> show port info 0
>>
>> ********************* Infos for port 0 *********************
>> MAC address: 52:54:00:B0:8F:88
>> Device name: 0000:03:00.0
>> Driver name: net_virtio
>> Firmware-version: not available
>> Devargs:
>> Connect to socket: 0
>> memory allocation on the socket: 0
>> Link status: up
>> Link speed: Unknown
>> Link duplex: full-duplex
>> Autoneg status: On
>> MTU: 1500
>> Promiscuous mode: enabled
>> Allmulticast mode: disabled
>> Maximum number of MAC addresses: 64
>> Maximum number of MAC addresses of hash filtering: 0
>> VLAN offload:
>> strip off, filter off, extend off, qinq strip off
>> No RSS offload flow type is supported.
>> Minimum size of RX buffer: 64
>> Maximum configurable length of RX packet: 9728
>> Maximum configurable size of LRO aggregated packet: 0
>> Current number of RX queues: 1
>> Max possible RX queues: 1
>> Max possible number of RXDs per queue: 32768
>> Min possible number of RXDs per queue: 32
>> RXDs number alignment: 1
>> Current number of TX queues: 1
>> Max possible TX queues: 1
>> Max possible number of TXDs per queue: 32768
>> Min possible number of TXDs per queue: 32
>> TXDs number alignment: 1
>> Max segment number per packet: 65535
>> Max segment number per MTU/TSO: 65535
>> Device capabilities: 0x0( )
>> Device error handling mode: none
>> Device private info:
>> guest_features: 0x110af8020
>> vtnet_hdr_size: 12
>> use_vec: rx-0 tx-0
>> use_inorder: rx-0 tx-0
>> intr_lsc: 1
>> max_mtu: 9698
>> max_rx_pkt_len: 1530
>> max_queue_pairs: 1
>> req_guest_features: 0x8000005f10ef8028
>>
>> 3) show port xstats:
>>
>> show port xstats 0
>> ###### NIC extended statistics for port 0
>> rx_good_packets: 0
>> tx_good_packets: 0
>> rx_good_bytes: 0
>> tx_good_bytes: 0
>> rx_missed_errors: 0
>> rx_errors: 0
>> tx_errors: 0
>> rx_mbuf_allocation_errors: 0
>> rx_q0_packets: 0
>> rx_q0_bytes: 0
>> rx_q0_errors: 0 <==================
>> tx_q0_packets: 0
>> tx_q0_bytes: 0
>> rx_q0_good_packets: 0
>> rx_q0_good_bytes: 0
>> rx_q0_errors: 0 <==================
>> rx_q0_multicast_packets: 0
>> rx_q0_broadcast_packets: 0
>> rx_q0_undersize_packets: 0
>> rx_q0_size_64_packets: 0
>> rx_q0_size_65_127_packets: 0
>> rx_q0_size_128_255_packets: 0
>> rx_q0_size_256_511_packets: 0
>> rx_q0_size_512_1023_packets: 0
>> rx_q0_size_1024_1518_packets: 0
>> rx_q0_size_1519_max_packets: 0
>> tx_q0_good_packets: 0
>> tx_q0_good_bytes: 0
>> tx_q0_multicast_packets: 0
>> tx_q0_broadcast_packets: 0
>> tx_q0_undersize_packets: 0
>> tx_q0_size_64_packets: 0
>> tx_q0_size_65_127_packets: 0
>> tx_q0_size_128_255_packets: 0
>> tx_q0_size_256_511_packets: 0
>> tx_q0_size_512_1023_packets: 0
>> tx_q0_size_1024_1518_packets: 0
>> tx_q0_size_1519_max_packets: 0
>>
>> You can see the stat "rx_q0_errors" appeared twice.
>
If simply adding the flag solves your issue, do you plan to submit a
patch?
If not, could you please file a Bz in the upstream bug tracker so that
we don't lose track of this bug?
Best regards,
Maxime
