[dpdk-dev] [PATCH 1/3] fm10k: add multi-queue checking

[Qiu, Michael]

On 2015/9/30 15:29, Shaopeng He wrote:
> Add multi-queue checking in device configure process.
> Currently, VMDQ and RSS are supported.
>
> Signed-off-by: Shaopeng He <shaopeng.he at intel.com>
> ---
>  drivers/net/fm10k/fm10k_ethdev.c | 44 
> ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
>
> diff --git a/drivers/net/fm10k/fm10k_ethdev.c 
> b/drivers/net/fm10k/fm10k_ethdev.c
> index a69c990..082937d 100644
> --- a/drivers/net/fm10k/fm10k_ethdev.c
> +++ b/drivers/net/fm10k/fm10k_ethdev.c
> @@ -283,12 +283,56 @@ tx_queue_disable(struct fm10k_hw *hw, uint16_t qnum)
>  }
>  
>  static int
> +fm10k_check_mq_mode(struct rte_eth_dev *dev)
> +{
> +     enum rte_eth_rx_mq_mode rx_mq_mode = dev->data->dev_conf.rxmode.mq_mode;
> +     struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> +     struct rte_eth_vmdq_rx_conf *vmdq_conf;
> +     uint16_t nb_rx_q = dev->data->nb_rx_queues;
> +
> +     vmdq_conf = &dev->data->dev_conf.rx_adv_conf.vmdq_rx_conf;
> +
> +     if (rx_mq_mode & ETH_MQ_RX_DCB_FLAG) {
> +             PMD_INIT_LOG(ERR, "DCB mode is not supported.");
> +             return -EINVAL;
> +     }
> +
> +     if (!(rx_mq_mode & ETH_MQ_RX_VMDQ_FLAG))
> +             return 0;
> +
> +     if (hw->mac.type == fm10k_mac_vf) {
> +             PMD_INIT_LOG(ERR, "VMDQ mode is not supported in VF.");
> +             return -EINVAL;
> +     }

I think vf check should be the first one, then we do not need check dcb
and VMDq flag.

Thanks,
Michael
> +
> +     /* Check VMDQ queue pool number */
> +     if (vmdq_conf->nb_queue_pools >
> +                     sizeof(vmdq_conf->pool_map[0].pools) * CHAR_BIT ||
> +                     vmdq_conf->nb_queue_pools > nb_rx_q) {
> +             PMD_INIT_LOG(ERR, "Too many of queue pools: %d",
> +                     vmdq_conf->nb_queue_pools);
> +             return -EINVAL;
> +     }
> +
> +     return 0;
> +}
> +
> +static int
>  fm10k_dev_configure(struct rte_eth_dev *dev)
>  {
> +     int ret;
> +
>       PMD_INIT_FUNC_TRACE();
>  
>       if (dev->data->dev_conf.rxmode.hw_strip_crc == 0)
>               PMD_INIT_LOG(WARNING, "fm10k always strip CRC");
> +     /* multipe queue mode checking */
> +     ret  = fm10k_check_mq_mode(dev);
> +     if (ret != 0) {
> +             PMD_DRV_LOG(ERR, "fm10k_check_mq_mode fails with %d.",
> +                         ret);
> +             return ret;
> +     }
>  
>       return 0;
>  }