> Now the port Rx mq_mode had been set to RTE_ETH_MQ_RX_RSS
> by default, but some hw and/or virtual interface does not
> support the RSS and offload mode presupposed, e.g., some
> virtio interfaces in the cloud don't support
> RSS and the error msg may like:
>
> virtio_dev_configure(): RSS support requested but not supported by
> the device
> Port0 dev_configure = -95
>
> So to enable the l3fwd running in that environment, the Rx mode requirement
> can be relaxed to reflect the hardware feature reality here, and the l3fwd
> can run smoothly then.
>
> An option named "disable-rss" is added to disable the RX RSS explicitly,
> and it's disabled by default.
>
> Signed-off-by: Trevor Tao <taozj...@163.com>
> ---
> examples/l3fwd/main.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
> index 6063eb1399..b42365ef1b 100644
> --- a/examples/l3fwd/main.c
> +++ b/examples/l3fwd/main.c
> @@ -73,6 +73,7 @@ static enum L3FWD_LOOKUP_MODE lookup_mode;
> static int numa_on = 1; /**< NUMA is enabled by default. */
> static int parse_ptype; /**< Parse packet type using rx callback, and */
> /**< disabled by default */
> +static int disable_rss; /**< Disable the RX RSS mode */
> static int per_port_pool; /**< Use separate buffer pools per port; disabled
> */
> /**< by default */
>
> @@ -678,6 +679,7 @@ static const char short_options[] =
> #define CMD_LINE_OPT_MAX_PKT_LEN "max-pkt-len"
> #define CMD_LINE_OPT_HASH_ENTRY_NUM "hash-entry-num"
> #define CMD_LINE_OPT_PARSE_PTYPE "parse-ptype"
> +#define CMD_LINE_OPT_DISABLE_RSS "disable-rss"
> #define CMD_LINE_OPT_PER_PORT_POOL "per-port-pool"
> #define CMD_LINE_OPT_MODE "mode"
> #define CMD_LINE_OPT_EVENTQ_SYNC "eventq-sched"
> @@ -705,6 +707,7 @@ enum {
> CMD_LINE_OPT_MAX_PKT_LEN_NUM,
> CMD_LINE_OPT_HASH_ENTRY_NUM_NUM,
> CMD_LINE_OPT_PARSE_PTYPE_NUM,
> + CMD_LINE_OPT_DISABLE_RSS_NUM,
> CMD_LINE_OPT_RULE_IPV4_NUM,
> CMD_LINE_OPT_RULE_IPV6_NUM,
> CMD_LINE_OPT_ALG_NUM,
> @@ -728,6 +731,7 @@ static const struct option lgopts[] = {
> {CMD_LINE_OPT_MAX_PKT_LEN, 1, 0, CMD_LINE_OPT_MAX_PKT_LEN_NUM},
> {CMD_LINE_OPT_HASH_ENTRY_NUM, 1, 0, CMD_LINE_OPT_HASH_ENTRY_NUM_NUM},
> {CMD_LINE_OPT_PARSE_PTYPE, 0, 0, CMD_LINE_OPT_PARSE_PTYPE_NUM},
> + {CMD_LINE_OPT_DISABLE_RSS, 0, 0, CMD_LINE_OPT_DISABLE_RSS_NUM},
> {CMD_LINE_OPT_PER_PORT_POOL, 0, 0, CMD_LINE_OPT_PARSE_PER_PORT_POOL},
> {CMD_LINE_OPT_MODE, 1, 0, CMD_LINE_OPT_MODE_NUM},
> {CMD_LINE_OPT_EVENTQ_SYNC, 1, 0, CMD_LINE_OPT_EVENTQ_SYNC_NUM},
> @@ -853,6 +857,11 @@ parse_args(int argc, char **argv)
> parse_ptype = 1;
> break;
>
> + case CMD_LINE_OPT_DISABLE_RSS_NUM:
> + printf("Disable RX RSS\n");
> + disable_rss = 1;
> + break;
> +
> case CMD_LINE_OPT_PARSE_PER_PORT_POOL:
> printf("per port buffer pool is enabled\n");
> per_port_pool = 1;
> @@ -1257,7 +1266,7 @@ l3fwd_poll_resource_setup(void)
> local_port_conf.rx_adv_conf.rss_conf.rss_hf &=
> dev_info.flow_type_rss_offloads;
>
> - if (dev_info.max_rx_queues == 1)
> + if (disable_rss == 1 || dev_info.max_rx_queues == 1)
> local_port_conf.rxmode.mq_mode = RTE_ETH_MQ_RX_NONE;
>
> if (local_port_conf.rx_adv_conf.rss_conf.rss_hf !=
> --
Acked-by: Konstantin Ananyev <konstantin.anan...@huawei.com>
> 2.34.1
