Hi Maxime,
This email is regarding the following commit:
https://github.com/DPDK/dpdk/commit/ba55c94a7ebc386d2288d6578ed57aad6cb92657
A query had been sent previously on this topic (see below) indicating this
commit appears to have broken the 32-bit testpmd app and impacted one of our
products that runs as a 32-bit DPDK application. We consequently backed the
commit out of our product but would prefer to get a fix for it. In the earlier
exchange, you had asked if we were using virtio-pci or virtio-user (we are
using virtio-pci) and asked for logs which Sampath provided. It’s been a
while, so let me now if you need me to send resend those logs or need any other
information.
FWIW, I reproduced this using testpmd and noticed that this part of the change
seems to be the interesting part (in drivers/net/virtio/virtqueue.h):
/**
* Return the IOVA (or virtual address in case of virtio-user) of mbuf
* data buffer.
*
* The address is firstly casted to the word size (sizeof(uintptr_t))
* before casting it to uint64_t. This is to make it work with different
* combination of word size (64 bit and 32 bit) and virtio device
* (virtio-pci and virtio-user).
*/
#define VIRTIO_MBUF_ADDR(mb, vq) \
((uint64_t)(*(uintptr_t *)((uintptr_t)(mb) + (vq)->mbuf_addr_offset))
If I revert just this part of the changeset (by re-using the VIRTIO_MBUF_ADDR
to return buf_iova which matches what it had used previously), then 32-bit
testpmd is able to receive traffic again:
#define VIRTIO_MBUF_ADDR(mb, vq) (mb->buf_iova)
Looking at the address produced by each of these, I see the address is the same
except that the casting results in the upper bits getting cleared:
Address from patch (nonworking case) = 0x58e7c900
Address using buf_iova (working case) = 0x158e7c900
::
Address from patch (nonworking case) = 0x58e7bfc0
Address using buf_iova (working case) = 0x158e7bfc0
::
Address from patch (nonworking case) = 0x58e7b680
Address using buf_iova (working case) = 0x158e7b680
::
Regards, Dave
From: Sampath Peechu (speechu) <spee...@cisco.com>
Date: Monday, January 30, 2023 at 3:29 PM
To: Maxime Coquelin <maxime.coque...@redhat.com>, chenbo....@intel.com
<chenbo....@intel.com>, dev@dpdk.org <dev@dpdk.org>
Cc: Roger Melton (rmelton) <rmel...@cisco.com>, Malcolm Bumgardner (mbumgard)
<mbumg...@cisco.com>
Subject: Re: Commit broke 32-bit testpmd app
Hi Maxime,
Could you please let us know if you got a chance to look at the debugs logs I
provided?
Thanks,
Sampath
From: Sampath Peechu (speechu) <spee...@cisco.com>
Date: Tuesday, December 6, 2022 at 1:08 PM
To: Maxime Coquelin <maxime.coque...@redhat.com>, chenbo....@intel.com
<chenbo....@intel.com>, dev@dpdk.org <dev@dpdk.org>
Cc: Roger Melton (rmelton) <rmel...@cisco.com>
Subject: Re: Commit broke 32-bit testpmd app
Hi Maxime,
Did you get a chance to look into this?
Please let me know if you need anything else.
Thanks,
Sampath
From: Sampath Peechu (speechu) <spee...@cisco.com>
Date: Wednesday, November 23, 2022 at 5:15 PM
To: Maxime Coquelin <maxime.coque...@redhat.com>, chenbo....@intel.com
<chenbo....@intel.com>, dev@dpdk.org <dev@dpdk.org>
Cc: Roger Melton (rmelton) <rmel...@cisco.com>
Subject: Re: Commit broke 32-bit testpmd app
Hi Maxime,
I’m attaching the following for reference.
* Instructions for Centos8 test setup
* Diffs between the working and non-working versions (working version has
the problem commit backed out)
* Working logs (stats show that ping packets from neighbor VM can be seen
with both 64-bit and 32-bit apps)
* Non-working logs (stats show that ping packets from neighbor VM are seen
with 64-bit app but NOT seen with 32-bit app)
============================
$ sudo ./usertools/dpdk-devbind.py --status
Network devices using DPDK-compatible driver
============================================
0000:07:00.0 'Virtio network device 1041' drv=igb_uio unused=
0000:08:00.0 'Virtio network device 1041' drv=igb_uio unused=
Network devices using kernel driver
===================================
0000:01:00.0 'Virtio network device 1041' if=enp1s0 drv=virtio-pci
unused=igb_uio *Active*
…
===========================
Thanks,
Sampath
From: Maxime Coquelin <maxime.coque...@redhat.com>
Date: Tuesday, November 22, 2022 at 4:24 AM
To: Sampath Peechu (speechu) <spee...@cisco.com>, chenbo....@intel.com
<chenbo....@intel.com>, dev@dpdk.org <dev@dpdk.org>
Cc: Roger Melton (rmelton) <rmel...@cisco.com>
Subject: Re: Commit broke 32-bit testpmd app
Hi,
In my initial reply (see below), I also asked if you had logs to share.
And wondered whether it happens with Virtio PCI or Virtio-user?
Regards,
Maxime
On 11/16/22 00:30, Sampath Peechu (speechu) wrote:
> ++ dev@dpdk.org <mailto:dev@dpdk.org>
>
> *From: *Maxime Coquelin <maxime.coque...@redhat.com>
> *Date: *Tuesday, November 15, 2022 at 3:19 AM
> *To: *Sampath Peechu (speechu) <spee...@cisco.com>, chenbo....@intel.com
> <chenbo....@intel.com>
> *Cc: *Roger Melton (rmelton) <rmel...@cisco.com>
> *Subject: *Re: Commit broke 32-bit testpmd app
>
> Hi Sampath,
>
>
> Please add dev@dpdk.org, the upstream mailing list, if this is related
> to the upstream DPDK project.If it is using RHEL DPDK package, please
> use the appropriate support channels.
>
> On 11/14/22 23:55, Sampath Peechu (speechu) wrote:
> > Hi Virtio Maintainers team,
> >
> > This email is regarding the following commit.
> >
> >
> https://github.com/DPDK/dpdk/commit/ba55c94a7ebc386d2288d6578ed57aad6cb92657
> <https://github.com/DPDK/dpdk/commit/ba55c94a7ebc386d2288d6578ed57aad6cb92657>
>
> <https://github.com/DPDK/dpdk/commit/ba55c94a7ebc386d2288d6578ed57aad6cb92657
> <https://github.com/DPDK/dpdk/commit/ba55c94a7ebc386d2288d6578ed57aad6cb92657>>
> >
> > The above commit appears to have broken the 32-bit testpmd app (and
> > consequently impacted one of our products that runs as a 32-bit DPDK
> > app). The 64-bit testpmd app does not appear to be impacted though.
>
> We'll need some logs to understand what is going on.
> Does it happen with virtio-pci or virtio-user?
>
> Regards,
> Maxime
>
> > With the commit in place, we didn’t see any packets going through at
> > all. After backing out the commit and rebuilding the 32-bit testpmd app
> > in our test setup, we were able to pass traffic as expected.
> >
> > Could you please let us know if this is a known issue? And if there is a
> > fix available for it?
> >
> > Thank you,
> >
> > Sampath Peechu
> >
> > Cisco Systems
> >
>
