> -----Original Message-----
> From: David Marchand <david.march...@redhat.com>
> Sent: Monday, August 21, 2023 7:36 PM
> To: dev@dpdk.org
> Cc: tho...@monjalon.net; ferruh.yi...@amd.com; Xia, Chenbo
> <chenbo....@intel.com>; nipun.gu...@amd.com; Richardson, Bruce
> <bruce.richard...@intel.com>; Burakov, Anatoly <anatoly.bura...@intel.com>
> Subject: [PATCH v2 03/15] bus/pci: rework MSIX discovery with VFIO
> 
> This is a preparatory step before using new helpers for finding PCI
> capabilities.
> In the code querying PCI capabilities for checking MSIX availability,
> replace direct calls to VFIO fd with the existing helpers for reading
> PCI configuration space: this requires setting VFIO fd in the PCI
> device object than was done before this change and removes the need to
> pass around this vfio_dev_fd variable.
> 
> Signed-off-by: David Marchand <david.march...@redhat.com>
> ---
>  drivers/bus/pci/linux/pci_vfio.c | 27 ++++++++++-----------------
>  1 file changed, 10 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/bus/pci/linux/pci_vfio.c
> b/drivers/bus/pci/linux/pci_vfio.c
> index 8fa7fa458f..958f8b3b52 100644
> --- a/drivers/bus/pci/linux/pci_vfio.c
> +++ b/drivers/bus/pci/linux/pci_vfio.c
> @@ -107,23 +107,16 @@ pci_vfio_write_config(const struct rte_pci_device
> *dev,
> 
>  /* get PCI BAR number where MSI-X interrupts are */
>  static int
> -pci_vfio_get_msix_bar(const struct rte_pci_device *dev, int fd,
> +pci_vfio_get_msix_bar(const struct rte_pci_device *dev,
>       struct pci_msix_table *msix_table)
>  {
>       int ret;
>       uint32_t reg;
>       uint16_t flags;
>       uint8_t cap_id, cap_offset;
> -     uint64_t size, offset;
> -
> -     if (pci_vfio_get_region(dev, VFIO_PCI_CONFIG_REGION_INDEX,
> -             &size, &offset) != 0) {
> -             RTE_LOG(ERR, EAL, "Cannot get offset of CONFIG region.\n");
> -             return -1;
> -     }
> 
>       /* read PCI capability pointer from config space */
> -     ret = pread64(fd, &reg, sizeof(reg), offset + PCI_CAPABILITY_LIST);
> +     ret = rte_pci_read_config(dev, &reg, sizeof(reg),
> PCI_CAPABILITY_LIST);
>       if (ret != sizeof(reg)) {
>               RTE_LOG(ERR, EAL,
>                       "Cannot read capability pointer from PCI config
> space!\n");
> @@ -136,7 +129,7 @@ pci_vfio_get_msix_bar(const struct rte_pci_device *dev,
> int fd,
>       while (cap_offset) {
> 
>               /* read PCI capability ID */
> -             ret = pread64(fd, &reg, sizeof(reg), offset + cap_offset);
> +             ret = rte_pci_read_config(dev, &reg, sizeof(reg), cap_offset);
>               if (ret != sizeof(reg)) {
>                       RTE_LOG(ERR, EAL,
>                               "Cannot read capability ID from PCI config
> space!\n");
> @@ -148,7 +141,7 @@ pci_vfio_get_msix_bar(const struct rte_pci_device *dev,
> int fd,
> 
>               /* if we haven't reached MSI-X, check next capability */
>               if (cap_id != PCI_CAP_ID_MSIX) {
> -                     ret = pread64(fd, &reg, sizeof(reg), offset +
> cap_offset);
> +                     ret = rte_pci_read_config(dev, &reg, sizeof(reg),
> cap_offset);
>                       if (ret != sizeof(reg)) {
>                               RTE_LOG(ERR, EAL,
>                                       "Cannot read capability pointer from PCI
> config space!\n");
> @@ -163,14 +156,14 @@ pci_vfio_get_msix_bar(const struct rte_pci_device
> *dev, int fd,
>               /* else, read table offset */
>               else {
>                       /* table offset resides in the next 4 bytes */
> -                     ret = pread64(fd, &reg, sizeof(reg), offset + cap_offset
> + 4);
> +                     ret = rte_pci_read_config(dev, &reg, sizeof(reg),
> cap_offset + 4);
>                       if (ret != sizeof(reg)) {
>                               RTE_LOG(ERR, EAL,
>                                       "Cannot read table offset from PCI 
> config
> space!\n");
>                               return -1;
>                       }
> 
> -                     ret = pread64(fd, &flags, sizeof(flags), offset +
> cap_offset + 2);
> +                     ret = rte_pci_read_config(dev, &flags, sizeof(flags),
> cap_offset + 2);
>                       if (ret != sizeof(flags)) {
>                               RTE_LOG(ERR, EAL,
>                                       "Cannot read table flags from PCI config
> space!\n");
> @@ -306,9 +299,6 @@ pci_vfio_setup_interrupts(struct rte_pci_device *dev,
> int vfio_dev_fd)
>               if (rte_intr_fd_set(dev->intr_handle, fd))
>                       return -1;
> 
> -             if (rte_intr_dev_fd_set(dev->intr_handle, vfio_dev_fd))
> -                     return -1;
> -
>               switch (i) {
>               case VFIO_PCI_MSIX_IRQ_INDEX:
>                       intr_mode = RTE_INTR_MODE_MSIX;
> @@ -838,6 +828,9 @@ pci_vfio_map_resource_primary(struct rte_pci_device
> *dev)
>       if (ret)
>               return ret;
> 
> +     if (rte_intr_dev_fd_set(dev->intr_handle, vfio_dev_fd))
> +             goto err_vfio_dev_fd;
> +
>       /* allocate vfio_res and get region info */
>       vfio_res = rte_zmalloc("VFIO_RES", sizeof(*vfio_res), 0);
>       if (vfio_res == NULL) {
> @@ -869,7 +862,7 @@ pci_vfio_map_resource_primary(struct rte_pci_device
> *dev)
>       /* get MSI-X BAR, if any (we have to know where it is because we
> can't
>        * easily mmap it when using VFIO)
>        */
> -     ret = pci_vfio_get_msix_bar(dev, vfio_dev_fd, &vfio_res->msix_table);
> +     ret = pci_vfio_get_msix_bar(dev, &vfio_res->msix_table);
>       if (ret < 0) {
>               RTE_LOG(ERR, EAL, "%s cannot get MSI-X BAR number!\n",
>                               pci_addr);
> --
> 2.41.0

Reviewed-by: Chenbo Xia <chenbo....@intel.com>

Reply via email to