The power management API's were last changed in 22.11 release.
Therefore remove experimental for 23.11 release.
Signed-off-by: Stephen Hemminger <step...@networkplumber.org>
---
lib/power/rte_power.h | 4 ---
lib/power/rte_power_guest_channel.h | 4 ---
lib/power/rte_power_intel_uncore.h | 9 -------
lib/power/rte_power_pmd_mgmt.h | 40 -----------------------------
lib/power/version.map | 33 ++++++++----------------
5 files changed, 11 insertions(+), 79 deletions(-)
diff --git a/lib/power/rte_power.h b/lib/power/rte_power.h
index 5e2b87c775bf..4e7560118f3b 100644
--- a/lib/power/rte_power.h
+++ b/lib/power/rte_power.h
@@ -24,9 +24,6 @@ enum power_management_env {PM_ENV_NOT_SET,
PM_ENV_ACPI_CPUFREQ, PM_ENV_KVM_VM,
PM_ENV_PSTATE_CPUFREQ, PM_ENV_CPPC_CPUFREQ};
/**
- * @warning
- * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
- *
* Check if a specific power management environment type is supported on a
* currently running system.
*
@@ -38,7 +35,6 @@ enum power_management_env {PM_ENV_NOT_SET,
PM_ENV_ACPI_CPUFREQ, PM_ENV_KVM_VM,
* - 0 if unsupported
* - -1 if error, with rte_errno indicating reason for error.
*/
-__rte_experimental
int rte_power_check_env_supported(enum power_management_env env);
/**
diff --git a/lib/power/rte_power_guest_channel.h
b/lib/power/rte_power_guest_channel.h
index b5de1bd24318..55b76dfc4c08 100644
--- a/lib/power/rte_power_guest_channel.h
+++ b/lib/power/rte_power_guest_channel.h
@@ -135,9 +135,6 @@ int rte_power_guest_channel_send_msg(struct
rte_power_channel_packet *pkt,
unsigned int lcore_id);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Receive a message contained in pkt over the Virtio-Serial
* from the host endpoint.
*
@@ -155,7 +152,6 @@ int rte_power_guest_channel_send_msg(struct
rte_power_channel_packet *pkt,
* - 0 on success.
* - Negative on error.
*/
-__rte_experimental
int rte_power_guest_channel_receive_msg(void *pkt,
size_t pkt_len,
unsigned int lcore_id);
diff --git a/lib/power/rte_power_intel_uncore.h
b/lib/power/rte_power_intel_uncore.h
index 0bd9f193a170..8c4a533d80c1 100644
--- a/lib/power/rte_power_intel_uncore.h
+++ b/lib/power/rte_power_intel_uncore.h
@@ -34,7 +34,6 @@ extern "C" {
* - 0 on success.
* - Negative on error.
*/
-__rte_experimental
int
rte_power_uncore_init(unsigned int pkg, unsigned int die);
@@ -56,7 +55,6 @@ rte_power_uncore_init(unsigned int pkg, unsigned int die);
* - 0 on success.
* - Negative on error.
*/
-__rte_experimental
int
rte_power_uncore_exit(unsigned int pkg, unsigned int die);
@@ -77,7 +75,6 @@ rte_power_uncore_exit(unsigned int pkg, unsigned int die);
* The current index of available frequencies.
* If error, it will return 'RTE_POWER_INVALID_FREQ_INDEX = (~0)'.
*/
-__rte_experimental
uint32_t
rte_power_get_uncore_freq(unsigned int pkg, unsigned int die);
@@ -102,7 +99,6 @@ rte_power_get_uncore_freq(unsigned int pkg, unsigned int
die);
* - 0 on success without frequency changed.
* - Negative on error.
*/
-__rte_experimental
int
rte_power_set_uncore_freq(unsigned int pkg, unsigned int die, uint32_t index);
@@ -125,7 +121,6 @@ rte_power_set_uncore_freq(unsigned int pkg, unsigned int
die, uint32_t index);
* - 0 on success without frequency changed.
* - Negative on error.
*/
-__rte_experimental
int
rte_power_uncore_freq_max(unsigned int pkg, unsigned int die);
@@ -148,7 +143,6 @@ rte_power_uncore_freq_max(unsigned int pkg, unsigned int
die);
* - 0 on success without frequency changed.
* - Negative on error.
*/
-__rte_experimental
int
rte_power_uncore_freq_min(unsigned int pkg, unsigned int die);
@@ -168,7 +162,6 @@ rte_power_uncore_freq_min(unsigned int pkg, unsigned int
die);
* - The number of available index's in frequency array.
* - Negative on error.
*/
-__rte_experimental
int
rte_power_uncore_get_num_freqs(unsigned int pkg, unsigned int die);
@@ -182,7 +175,6 @@ rte_power_uncore_get_num_freqs(unsigned int pkg, unsigned
int die);
* - Zero on error.
* - Number of package on system on success.
*/
-__rte_experimental
unsigned int
rte_power_uncore_get_num_pkgs(void);
@@ -200,7 +192,6 @@ rte_power_uncore_get_num_pkgs(void);
* - Zero on error.
* - Number of dies for package on sucecss.
*/
-__rte_experimental
unsigned int
rte_power_uncore_get_num_dies(unsigned int pkg);
diff --git a/lib/power/rte_power_pmd_mgmt.h b/lib/power/rte_power_pmd_mgmt.h
index 0f1a2eb22eb4..456145661917 100644
--- a/lib/power/rte_power_pmd_mgmt.h
+++ b/lib/power/rte_power_pmd_mgmt.h
@@ -33,9 +33,6 @@ enum rte_power_pmd_mgmt_type {
};
/**
- * @warning
- * @b EXPERIMENTAL: this API may change, or be removed, without prior notice.
- *
* Enable power management on a specified Ethernet device Rx queue and lcore.
*
* @note This function is not thread-safe.
@@ -55,16 +52,12 @@ enum rte_power_pmd_mgmt_type {
* 0 on success
* <0 on error
*/
-__rte_experimental
int
rte_power_ethdev_pmgmt_queue_enable(unsigned int lcore_id,
uint16_t port_id, uint16_t queue_id,
enum rte_power_pmd_mgmt_type mode);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change, or be removed, without prior notice.
- *
* Disable power management on a specified Ethernet device Rx queue and lcore.
*
* @note This function is not thread-safe.
@@ -82,42 +75,30 @@ rte_power_ethdev_pmgmt_queue_enable(unsigned int lcore_id,
* 0 on success
* <0 on error
*/
-__rte_experimental
int
rte_power_ethdev_pmgmt_queue_disable(unsigned int lcore_id,
uint16_t port_id, uint16_t queue_id);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change, or be removed, without prior notice.
- *
* Set a emptypoll_max to specified value. Used to specify the number of empty
* polls to wait before entering sleep state.
*
* @param max
* The value to set emptypoll_max to.
*/
-__rte_experimental
void
rte_power_pmd_mgmt_set_emptypoll_max(unsigned int max);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change, or be removed, without prior notice.
- *
* Get the current value of emptypoll_max.
*
* @return
* The current emptypoll_max value
*/
-__rte_experimental
unsigned int
rte_power_pmd_mgmt_get_emptypoll_max(void);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change, or be removed, without prior notice.
- *
* Set the pause_duration. Used to adjust the pause mode callback duration.
*
* @note Duration must be greater than zero.
@@ -128,27 +109,19 @@ rte_power_pmd_mgmt_get_emptypoll_max(void);
* 0 on success
* <0 on error
*/
-__rte_experimental
int
rte_power_pmd_mgmt_set_pause_duration(unsigned int duration);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change, or be removed, without prior notice.
- *
* Get the current value of pause_duration.
*
* @return
* The current pause_duration value.
*/
-__rte_experimental
unsigned int
rte_power_pmd_mgmt_get_pause_duration(void);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change, or be removed, without prior notice.
- *
* Set the min frequency to be used for frequency scaling or zero to use
defaults.
*
* @note Supported by: Pstate mode.
@@ -161,14 +134,10 @@ rte_power_pmd_mgmt_get_pause_duration(void);
* 0 on success
* <0 on error
*/
-__rte_experimental
int
rte_power_pmd_mgmt_set_scaling_freq_min(unsigned int lcore, unsigned int min);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change, or be removed, without prior notice.
- *
* Set the max frequency to be used for frequency scaling or zero to use
defaults.
*
* @note Supported by: Pstate mode.
@@ -182,14 +151,10 @@ rte_power_pmd_mgmt_set_scaling_freq_min(unsigned int
lcore, unsigned int min);
* 0 on success
* <0 on error
*/
-__rte_experimental
int
rte_power_pmd_mgmt_set_scaling_freq_max(unsigned int lcore, unsigned int max);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change, or be removed, without prior notice.
- *
* Get the current configured min frequency used for frequency scaling.
*
* @note Supported by: Pstate mode.
@@ -202,14 +167,10 @@ rte_power_pmd_mgmt_set_scaling_freq_max(unsigned int
lcore, unsigned int max);
* , in KiloHertz, used for frequency scaling.
* <0 on error
*/
-__rte_experimental
int
rte_power_pmd_mgmt_get_scaling_freq_min(unsigned int lcore);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change, or be removed, without prior notice.
- *
* Get the current configured max frequency used for frequency scaling.
*
* @note Supported by: Pstate mode.
@@ -222,7 +183,6 @@ rte_power_pmd_mgmt_get_scaling_freq_min(unsigned int lcore);
* , in KiloHertz, used for frequency scaling.
* <0 on error
*/
-__rte_experimental
int
rte_power_pmd_mgmt_get_scaling_freq_max(unsigned int lcore);
diff --git a/lib/power/version.map b/lib/power/version.map
index b8b54f768e5b..dae4bcfa0956 100644
--- a/lib/power/version.map
+++ b/lib/power/version.map
@@ -1,6 +1,9 @@
DPDK_24 {
global:
+ rte_power_check_env_supported;
+ rte_power_ethdev_pmgmt_queue_disable;
+ rte_power_ethdev_pmgmt_queue_enable;
rte_power_exit;
rte_power_freq_disable_turbo;
rte_power_freq_down;
@@ -12,27 +15,10 @@ DPDK_24 {
rte_power_get_capabilities;
rte_power_get_env;
rte_power_get_freq;
+ rte_power_get_uncore_freq;
+ rte_power_guest_channel_receive_msg;
rte_power_guest_channel_send_msg;
rte_power_init;
- rte_power_set_env;
- rte_power_set_freq;
- rte_power_turbo_status;
- rte_power_unset_env;
-
- local: *;
-};
-
-EXPERIMENTAL {
- global:
-
- rte_power_check_env_supported;
- rte_power_guest_channel_receive_msg;
-
- # added in 21.02
- rte_power_ethdev_pmgmt_queue_disable;
- rte_power_ethdev_pmgmt_queue_enable;
-
- # added in 22.07
rte_power_pmd_mgmt_get_emptypoll_max;
rte_power_pmd_mgmt_get_pause_duration;
rte_power_pmd_mgmt_get_scaling_freq_max;
@@ -41,10 +27,10 @@ EXPERIMENTAL {
rte_power_pmd_mgmt_set_pause_duration;
rte_power_pmd_mgmt_set_scaling_freq_max;
rte_power_pmd_mgmt_set_scaling_freq_min;
-
- # added in 22.11
- rte_power_get_uncore_freq;
+ rte_power_set_env;
+ rte_power_set_freq;
rte_power_set_uncore_freq;
+ rte_power_turbo_status;
rte_power_uncore_exit;
rte_power_uncore_freq_max;
rte_power_uncore_freq_min;
@@ -52,4 +38,7 @@ EXPERIMENTAL {
rte_power_uncore_get_num_freqs;
rte_power_uncore_get_num_pkgs;
rte_power_uncore_init;
+ rte_power_unset_env;
+
+ local: *;
};
--
2.39.2
