For command VIRTCHNL_OP_REQUEST_QUEUES, polling access to the admin
queue has the issue of access overruns after disabling interrupt. That
results in FW disabling HW interrupt for protection purposes.

The updates/changes in this patch:
1. Remove the polling admin queue processing and use the generic interrupt
processing instead.
2. Release redundant queue resource before stopping processing interrupt
events.

Fixes: 22b123a36d07 ("net/avf: initialize PMD")
Fixes: ef807926e148 ("net/iavf: support requesting additional queues from PF")
Fixes: 84108425054a ("net/iavf: support asynchronous virtual channel message")
Cc: sta...@dpdk.org

Signed-off-by: Mingjin Ye <mingjinx...@intel.com>
---
v2: Fix git version conflict.
---
 drivers/net/iavf/iavf_ethdev.c | 25 +++++++++---------
 drivers/net/iavf/iavf_vchnl.c  | 48 +++++++---------------------------
 2 files changed, 23 insertions(+), 50 deletions(-)

diff --git a/drivers/net/iavf/iavf_ethdev.c b/drivers/net/iavf/iavf_ethdev.c
index b72dbc8ceb..00b963128b 100644
--- a/drivers/net/iavf/iavf_ethdev.c
+++ b/drivers/net/iavf/iavf_ethdev.c
@@ -2757,6 +2757,19 @@ iavf_dev_close(struct rte_eth_dev *dev)
        }
 
        ret = iavf_dev_stop(dev);
+
+       /*
+        * Release redundant queue resource when close the dev
+        * so that other vfs can re-use the queues.
+        */
+       if (vf->lv_enabled) {
+               ret = iavf_request_queues(dev, IAVF_MAX_NUM_QUEUES_DFLT);
+               if (ret)
+                       PMD_DRV_LOG(ERR, "Reset the num of queues failed");
+
+               vf->max_rss_qregion = IAVF_MAX_NUM_QUEUES_DFLT;
+       }
+
        adapter->closed = true;
 
        /* free iAVF security device context all related resources */
@@ -2773,18 +2786,6 @@ iavf_dev_close(struct rte_eth_dev *dev)
        if (vf->promisc_unicast_enabled || vf->promisc_multicast_enabled)
                iavf_config_promisc(adapter, false, false);
 
-       /*
-        * Release redundant queue resource when close the dev
-        * so that other vfs can re-use the queues.
-        */
-       if (vf->lv_enabled) {
-               ret = iavf_request_queues(dev, IAVF_MAX_NUM_QUEUES_DFLT);
-               if (ret)
-                       PMD_DRV_LOG(ERR, "Reset the num of queues failed");
-
-               vf->max_rss_qregion = IAVF_MAX_NUM_QUEUES_DFLT;
-       }
-
        iavf_shutdown_adminq(hw);
        if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_WB_ON_ITR) {
                /* disable uio intr before callback unregister */
diff --git a/drivers/net/iavf/iavf_vchnl.c b/drivers/net/iavf/iavf_vchnl.c
index 07eb358824..524732f67d 100644
--- a/drivers/net/iavf/iavf_vchnl.c
+++ b/drivers/net/iavf/iavf_vchnl.c
@@ -324,6 +324,7 @@ iavf_execute_vf_cmd(struct iavf_adapter *adapter, struct 
iavf_cmd_info *args,
 
        switch (args->ops) {
        case VIRTCHNL_OP_RESET_VF:
+       case VIRTCHNL_OP_REQUEST_QUEUES:
                /*no need to wait for response */
                _clear_cmd(vf);
                break;
@@ -347,33 +348,6 @@ iavf_execute_vf_cmd(struct iavf_adapter *adapter, struct 
iavf_cmd_info *args,
                }
                _clear_cmd(vf);
                break;
-       case VIRTCHNL_OP_REQUEST_QUEUES:
-               /*
-                * ignore async reply, only wait for system message,
-                * vf_reset = true if get VIRTCHNL_EVENT_RESET_IMPENDING,
-                * if not, means request queues failed.
-                */
-               do {
-                       result = iavf_read_msg_from_pf(adapter, args->out_size,
-                                                  args->out_buffer);
-                       if (result == IAVF_MSG_SYS && vf->vf_reset) {
-                               break;
-                       } else if (result == IAVF_MSG_CMD ||
-                               result == IAVF_MSG_ERR) {
-                               err = -1;
-                               break;
-                       }
-                       iavf_msec_delay(ASQ_DELAY_MS);
-                       /* If don't read msg or read sys event, continue */
-               } while (i++ < MAX_TRY_TIMES);
-               if (i >= MAX_TRY_TIMES ||
-                       vf->cmd_retval != VIRTCHNL_STATUS_SUCCESS) {
-                       err = -1;
-                       PMD_DRV_LOG(ERR, "No response or return failure (%d)"
-                                   " for cmd %d", vf->cmd_retval, args->ops);
-               }
-               _clear_cmd(vf);
-               break;
        default:
                if (rte_thread_is_intr()) {
                        /* For virtchnl ops were executed in eal_intr_thread,
@@ -2082,11 +2056,11 @@ iavf_request_queues(struct rte_eth_dev *dev, uint16_t 
num)
        struct iavf_adapter *adapter =
                IAVF_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
        struct iavf_info *vf =  IAVF_DEV_PRIVATE_TO_VF(adapter);
-       struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
        struct virtchnl_vf_res_request vfres;
        struct iavf_cmd_info args;
        uint16_t num_queue_pairs;
        int err;
+       int i = 0;
 
        if (!(vf->vf_res->vf_cap_flags &
                VIRTCHNL_VF_OFFLOAD_REQ_QUEUES)) {
@@ -2107,16 +2081,7 @@ iavf_request_queues(struct rte_eth_dev *dev, uint16_t 
num)
        args.out_size = IAVF_AQ_BUF_SZ;
 
        if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_WB_ON_ITR) {
-               /* disable interrupt to avoid the admin queue message to be read
-                * before iavf_read_msg_from_pf.
-                *
-                * don't disable interrupt handler until ready to execute vf 
cmd.
-                */
-               rte_spinlock_lock(&vf->aq_lock);
-               rte_intr_disable(pci_dev->intr_handle);
-               err = iavf_execute_vf_cmd(adapter, &args, 0);
-               rte_intr_enable(pci_dev->intr_handle);
-               rte_spinlock_unlock(&vf->aq_lock);
+               err = iavf_execute_vf_cmd_safe(adapter, &args, 0);
        } else {
                rte_eal_alarm_cancel(iavf_dev_alarm_handler, dev);
                err = iavf_execute_vf_cmd_safe(adapter, &args, 0);
@@ -2129,6 +2094,13 @@ iavf_request_queues(struct rte_eth_dev *dev, uint16_t 
num)
                return err;
        }
 
+       /* wait for interrupt notification vf is resetting */
+       while (i++ < MAX_TRY_TIMES) {
+               if (vf->vf_reset)
+                       break;
+               iavf_msec_delay(ASQ_DELAY_MS);
+       }
+
        /* request queues succeeded, vf is resetting */
        if (vf->vf_reset) {
                PMD_DRV_LOG(INFO, "vf is resetting");
-- 
2.25.1

Reply via email to