MSI's are exposed to the devices using VFIO (vfio-cdx). This
patch uses the same to add support for MSI for the devices on
the cdx bus.
Signed-off-by: Nipun Gupta <nipun.gu...@amd.com>
Acked-by: Ferruh Yigit <ferruh.yi...@amd.com>
---
drivers/bus/cdx/bus_cdx_driver.h | 25 +++++
drivers/bus/cdx/cdx.c | 11 ++
drivers/bus/cdx/cdx_vfio.c | 176 ++++++++++++++++++++++++++++++-
drivers/bus/cdx/version.map | 2 +
4 files changed, 212 insertions(+), 2 deletions(-)
diff --git a/drivers/bus/cdx/bus_cdx_driver.h b/drivers/bus/cdx/bus_cdx_driver.h
index dbbd1bbdf2..5745429fa7 100644
--- a/drivers/bus/cdx/bus_cdx_driver.h
+++ b/drivers/bus/cdx/bus_cdx_driver.h
@@ -56,6 +56,7 @@ struct rte_cdx_device {
struct rte_cdx_id id; /**< CDX ID. */
struct rte_mem_resource mem_resource[CDX_MAX_RESOURCE];
/**< CDX Memory Resource */
+ struct rte_intr_handle *intr_handle; /**< Interrupt handle */
};
/**
@@ -147,6 +148,30 @@ void rte_cdx_unmap_device(struct rte_cdx_device *dev);
__rte_internal
void rte_cdx_register(struct rte_cdx_driver *driver);
+/**
+ * Enables VFIO Interrupts for CDX bus devices.
+ *
+ * @param intr_handle
+ * Pointer to the interrupt handle.
+ *
+ * @return
+ * 0 on success, -1 on error.
+ */
+__rte_internal
+int rte_cdx_vfio_intr_enable(const struct rte_intr_handle *intr_handle);
+
+/**
+ * Disable VFIO Interrupts for CDX bus devices.
+ *
+ * @param intr_handle
+ * Pointer to the interrupt handle.
+ *
+ * @return
+ * 0 on success, -1 on error.
+ */
+__rte_internal
+int rte_cdx_vfio_intr_disable(const struct rte_intr_handle *intr_handle);
+
/**
* Helper for CDX device registration from driver (eth, crypto, raw) instance
*/
diff --git a/drivers/bus/cdx/cdx.c b/drivers/bus/cdx/cdx.c
index 9ad8f73424..e5e6a665c3 100644
--- a/drivers/bus/cdx/cdx.c
+++ b/drivers/bus/cdx/cdx.c
@@ -202,6 +202,15 @@ cdx_scan_one(const char *dirname, const char *dev_name)
goto err;
}
+ /* Allocate interrupt instance for cdx device */
+ dev->intr_handle =
+ rte_intr_instance_alloc(RTE_INTR_INSTANCE_F_PRIVATE);
+ if (dev->intr_handle == NULL) {
+ CDX_BUS_ERR("Failed to create interrupt instance for %s",
+ dev->device.name);
+ return -ENOMEM;
+ }
+
/*
* Check if device is bound to 'vfio-cdx' driver, so that user-space
* can gracefully access the device.
@@ -380,6 +389,8 @@ cdx_probe_one_driver(struct rte_cdx_driver *dr,
return ret;
error_probe:
+ rte_intr_instance_free(dev->intr_handle);
+ dev->intr_handle = NULL;
cdx_vfio_unmap_resource(dev);
error_map_device:
return ret;
diff --git a/drivers/bus/cdx/cdx_vfio.c b/drivers/bus/cdx/cdx_vfio.c
index c545bcd9f5..e8ccf7fb94 100644
--- a/drivers/bus/cdx/cdx_vfio.c
+++ b/drivers/bus/cdx/cdx_vfio.c
@@ -51,6 +51,10 @@ struct mapped_cdx_resource {
/** mapped cdx device list */
TAILQ_HEAD(mapped_cdx_res_list, mapped_cdx_resource);
+/* IRQ set buffer length for MSI interrupts */
+#define MSI_IRQ_SET_BUF_LEN (sizeof(struct vfio_irq_set) + \
+ sizeof(int) * (RTE_MAX_RXTX_INTR_VEC_ID + 1))
+
static struct rte_tailq_elem cdx_vfio_tailq = {
.name = "VFIO_CDX_RESOURCE_LIST",
};
@@ -95,6 +99,27 @@ cdx_vfio_unmap_resource_primary(struct rte_cdx_device *dev)
char cdx_addr[PATH_MAX] = {0};
struct mapped_cdx_resource *vfio_res = NULL;
struct mapped_cdx_res_list *vfio_res_list;
+ int ret, vfio_dev_fd;
+
+ if (rte_intr_fd_get(dev->intr_handle) < 0)
+ return -1;
+
+ if (close(rte_intr_fd_get(dev->intr_handle)) < 0) {
+ CDX_BUS_ERR("Error when closing eventfd file descriptor for %s",
+ dev->device.name);
+ return -1;
+ }
+
+ vfio_dev_fd = rte_intr_dev_fd_get(dev->intr_handle);
+ if (vfio_dev_fd < 0)
+ return -1;
+
+ ret = rte_vfio_release_device(CDX_BUS_DEVICES_PATH, dev->device.name,
+ vfio_dev_fd);
+ if (ret < 0) {
+ CDX_BUS_ERR("Cannot release VFIO device");
+ return ret;
+ }
vfio_res_list =
RTE_TAILQ_CAST(cdx_vfio_tailq.head, mapped_cdx_res_list);
@@ -117,6 +142,18 @@ cdx_vfio_unmap_resource_secondary(struct rte_cdx_device
*dev)
{
struct mapped_cdx_resource *vfio_res = NULL;
struct mapped_cdx_res_list *vfio_res_list;
+ int ret, vfio_dev_fd;
+
+ vfio_dev_fd = rte_intr_dev_fd_get(dev->intr_handle);
+ if (vfio_dev_fd < 0)
+ return -1;
+
+ ret = rte_vfio_release_device(CDX_BUS_DEVICES_PATH, dev->device.name,
+ vfio_dev_fd);
+ if (ret < 0) {
+ CDX_BUS_ERR("Cannot release VFIO device");
+ return ret;
+ }
vfio_res_list =
RTE_TAILQ_CAST(cdx_vfio_tailq.head, mapped_cdx_res_list);
@@ -141,9 +178,74 @@ cdx_vfio_unmap_resource(struct rte_cdx_device *dev)
return cdx_vfio_unmap_resource_secondary(dev);
}
+/* set up interrupt support (but not enable interrupts) */
static int
-cdx_rte_vfio_setup_device(int vfio_dev_fd)
+cdx_vfio_setup_interrupts(struct rte_cdx_device *dev, int vfio_dev_fd,
+ int num_irqs)
{
+ int i, ret;
+
+ if (num_irqs == 0)
+ return 0;
+
+ /* start from MSI interrupt type */
+ for (i = 0; i < num_irqs; i++) {
+ struct vfio_irq_info irq = { .argsz = sizeof(irq) };
+ int fd = -1;
+
+ irq.index = i;
+
+ ret = ioctl(vfio_dev_fd, VFIO_DEVICE_GET_IRQ_INFO, &irq);
+ if (ret < 0) {
+ CDX_BUS_ERR("Cannot get VFIO IRQ info, error %i (%s)",
+ errno, strerror(errno));
+ return -1;
+ }
+
+ /* if this vector cannot be used with eventfd, fail if we
explicitly
+ * specified interrupt type, otherwise continue
+ */
+ if ((irq.flags & VFIO_IRQ_INFO_EVENTFD) == 0)
+ continue;
+
+ /* Set nb_intr to the total number of interrupts */
+ if (rte_intr_event_list_update(dev->intr_handle, irq.count))
+ return -1;
+
+ /* set up an eventfd for interrupts */
+ fd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
+ if (fd < 0) {
+ CDX_BUS_ERR("Cannot set up eventfd, error %i (%s)",
+ errno, strerror(errno));
+ return -1;
+ }
+
+ if (rte_intr_fd_set(dev->intr_handle, fd))
+ return -1;
+
+ /* DPDK CDX bus currently supports only MSI-X */
+ if (rte_intr_type_set(dev->intr_handle,
RTE_INTR_HANDLE_VFIO_MSIX))
+ return -1;
+
+ if (rte_intr_dev_fd_set(dev->intr_handle, vfio_dev_fd))
+ return -1;
+
+ return 0;
+ }
+
+ /* if we're here, we haven't found a suitable interrupt vector */
+ return -1;
+}
+
+static int
+cdx_vfio_setup_device(struct rte_cdx_device *dev, int vfio_dev_fd,
+ int num_irqs)
+{
+ if (cdx_vfio_setup_interrupts(dev, vfio_dev_fd, num_irqs) != 0) {
+ CDX_BUS_ERR("Error setting up interrupts!");
+ return -1;
+ }
+
/*
* Reset the device. If the device is not capable of resetting,
* then it updates errno as EINVAL.
@@ -279,6 +381,9 @@ cdx_vfio_map_resource_primary(struct rte_cdx_device *dev)
struct cdx_map *maps;
int vfio_dev_fd, i, ret;
+ if (rte_intr_fd_set(dev->intr_handle, -1))
+ return -1;
+
ret = rte_vfio_setup_device(CDX_BUS_DEVICES_PATH, dev_name,
&vfio_dev_fd, &device_info);
if (ret)
@@ -344,7 +449,7 @@ cdx_vfio_map_resource_primary(struct rte_cdx_device *dev)
free(reg);
}
- if (cdx_rte_vfio_setup_device(vfio_dev_fd) < 0) {
+ if (cdx_vfio_setup_device(dev, vfio_dev_fd, device_info.num_irqs) < 0) {
CDX_BUS_ERR("%s setup device failed", dev_name);
goto err_vfio_res;
}
@@ -373,6 +478,9 @@ cdx_vfio_map_resource_secondary(struct rte_cdx_device *dev)
const char *dev_name = dev->device.name;
struct cdx_map *maps;
+ if (rte_intr_fd_set(dev->intr_handle, -1))
+ return -1;
+
/* if we're in a secondary process, just find our tailq entry */
TAILQ_FOREACH(vfio_res, vfio_res_list, next) {
if (strcmp(vfio_res->name, dev_name))
@@ -406,6 +514,10 @@ cdx_vfio_map_resource_secondary(struct rte_cdx_device *dev)
dev->mem_resource[i].len = maps[i].size;
}
+ /* we need save vfio_dev_fd, so it can be used during release */
+ if (rte_intr_dev_fd_set(dev->intr_handle, vfio_dev_fd))
+ goto err_vfio_dev_fd;
+
return 0;
err_vfio_dev_fd:
rte_vfio_release_device(CDX_BUS_DEVICES_PATH, cdx_addr, vfio_dev_fd);
@@ -424,3 +536,63 @@ cdx_vfio_map_resource(struct rte_cdx_device *dev)
else
return cdx_vfio_map_resource_secondary(dev);
}
+
+int
+rte_cdx_vfio_intr_enable(const struct rte_intr_handle *intr_handle)
+{
+ char irq_set_buf[MSI_IRQ_SET_BUF_LEN];
+ struct vfio_irq_set *irq_set;
+ int *fd_ptr, vfio_dev_fd, i;
+ int ret;
+
+ irq_set = (struct vfio_irq_set *) irq_set_buf;
+ irq_set->count = rte_intr_nb_intr_get(intr_handle);
+ irq_set->argsz = sizeof(struct vfio_irq_set) +
+ (sizeof(int) * irq_set->count);
+
+ irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
VFIO_IRQ_SET_ACTION_TRIGGER;
+ irq_set->index = 0;
+ irq_set->start = 0;
+ fd_ptr = (int *) &irq_set->data;
+
+ for (i = 0; i < rte_intr_nb_efd_get(intr_handle); i++)
+ fd_ptr[i] = rte_intr_efds_index_get(intr_handle, i);
+
+ vfio_dev_fd = rte_intr_dev_fd_get(intr_handle);
+ ret = ioctl(vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set);
+
+ if (ret) {
+ CDX_BUS_ERR("Error enabling MSI interrupts for fd %d",
+ rte_intr_fd_get(intr_handle));
+ return -1;
+ }
+
+ return 0;
+}
+
+/* disable MSI interrupts */
+int
+rte_cdx_vfio_intr_disable(const struct rte_intr_handle *intr_handle)
+{
+ struct vfio_irq_set *irq_set;
+ char irq_set_buf[MSI_IRQ_SET_BUF_LEN];
+ int len, ret, vfio_dev_fd;
+
+ len = sizeof(struct vfio_irq_set);
+
+ irq_set = (struct vfio_irq_set *) irq_set_buf;
+ irq_set->argsz = len;
+ irq_set->count = 0;
+ irq_set->flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_TRIGGER;
+ irq_set->index = 0;
+ irq_set->start = 0;
+
+ vfio_dev_fd = rte_intr_dev_fd_get(intr_handle);
+ ret = ioctl(vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set);
+
+ if (ret)
+ CDX_BUS_ERR("Error disabling MSI interrupts for fd %d",
+ rte_intr_fd_get(intr_handle));
+
+ return ret;
+}
diff --git a/drivers/bus/cdx/version.map b/drivers/bus/cdx/version.map
index 957fcab978..2f3d484ebd 100644
--- a/drivers/bus/cdx/version.map
+++ b/drivers/bus/cdx/version.map
@@ -6,6 +6,8 @@ INTERNAL {
rte_cdx_register;
rte_cdx_unmap_device;
rte_cdx_unregister;
+ rte_cdx_vfio_intr_disable;
+ rte_cdx_vfio_intr_enable;
local: *;
};
--
2.17.1
