> -----Original Message-----
> From: Ye, MingjinX <mingjinx...@intel.com>
> Sent: Monday, March 20, 2023 5:41 PM
> To: dev@dpdk.org
> Cc: Yang, Qiming <qiming.y...@intel.com>; sta...@dpdk.org; Zhou, YidingX
> <yidingx.z...@intel.com>; Ye, MingjinX <mingjinx...@intel.com>; Zhang,
> Ke1X <ke1x.zh...@intel.com>; Zhang, Qi Z <qi.z.zh...@intel.com>
> Subject: [PATCH v5] net/ice: fix ice dcf control thread crash
>
> The control thread accesses the hardware resources after the resources were
> released, which results in a segment error.
>
> The 'ice-reset' threads are detached, so thread resources cannot be
> reclaimed by `pthread_join` calls.
>
> This commit synchronizes the number of 'ice-reset' threads by adding two
> variables ('vsi_update_thread_num' and 'vsi_thread_lock' spinlock) to 'struct
> ice_dcf_hw'. When releasing HW resources, we clear the event callback
> function. That makes these threads exit quickly. After the number of 'ice-
> reset' threads decreased to be 0, we release resources.
>
> Fixes: 3b3757bda3c3 ("net/ice: get VF hardware index in DCF")
> Fixes: 931ee54072b1 ("net/ice: support QoS bandwidth config after VF reset
> in DCF")
> Fixes: c7e1a1a3bfeb ("net/ice: refactor DCF VLAN handling")
> Fixes: 0b02c9519432 ("net/ice: handle PF initialization by DCF")
> Fixes: b71573ec2fc2 ("net/ice: retry getting VF VSI map after failure")
> Fixes: 7564d5509611 ("net/ice: add DCF hardware initialization")
> Cc: sta...@dpdk.org
>
> Signed-off-by: Ke Zhang <ke1x.zh...@intel.com>
> Signed-off-by: Mingjin Ye <mingjinx...@intel.com>
> ---
> v2: add pthread_exit() for windows
> ---
> v3: Optimization. It is unsafe for a thread to forcibly exit, which will cause
> the spin lock to not be released correctly
> ---
> v4: Safely wait for all event threads to end
> ---
> v5: Spinlock moved to struct ice_dcf_hw
> ---
> drivers/net/ice/ice_dcf.c | 21 +++++++++++++++++++--
> drivers/net/ice/ice_dcf.h | 3 +++
> drivers/net/ice/ice_dcf_parent.c | 23 +++++++++++++++++++++++
> 3 files changed, 45 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ice/ice_dcf.c b/drivers/net/ice/ice_dcf.c index
> 1c3d22ae0f..53f62a06f4 100644
> --- a/drivers/net/ice/ice_dcf.c
> +++ b/drivers/net/ice/ice_dcf.c
> @@ -543,6 +543,8 @@ ice_dcf_handle_vsi_update_event(struct ice_dcf_hw
> *hw)
> ice_dcf_disable_irq0(hw);
>
> for (;;) {
> + if (hw->vc_event_msg_cb == NULL)
> + break;
Can you explain why this is required, seems it not related with your commit log
> if (ice_dcf_get_vf_resource(hw) == 0 &&
> ice_dcf_get_vf_vsi_map(hw) >= 0) {
> err = 0;
> @@ -555,8 +557,10 @@ ice_dcf_handle_vsi_update_event(struct ice_dcf_hw
> *hw)
> rte_delay_ms(ICE_DCF_ARQ_CHECK_TIME);
> }
>
> - rte_intr_enable(pci_dev->intr_handle);
> - ice_dcf_enable_irq0(hw);
> + if (hw->vc_event_msg_cb != NULL) {
> + rte_intr_enable(pci_dev->intr_handle);
> + ice_dcf_enable_irq0(hw);
Same question as above
> + }
>
> rte_spinlock_unlock(&hw->vc_cmd_send_lock);
>
> @@ -639,6 +643,9 @@ ice_dcf_init_hw(struct rte_eth_dev *eth_dev, struct
> ice_dcf_hw *hw)
> rte_spinlock_init(&hw->vc_cmd_queue_lock);
> TAILQ_INIT(&hw->vc_cmd_queue);
>
> + rte_spinlock_init(&hw->vsi_thread_lock);
> + hw->vsi_update_thread_num = 0;
> +
> hw->arq_buf = rte_zmalloc("arq_buf", ICE_DCF_AQ_BUF_SZ, 0);
> if (hw->arq_buf == NULL) {
> PMD_INIT_LOG(ERR, "unable to allocate AdminQ buffer
> memory"); @@ -749,6 +756,12 @@ ice_dcf_uninit_hw(struct rte_eth_dev
> *eth_dev, struct ice_dcf_hw *hw)
> struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
> struct rte_intr_handle *intr_handle = pci_dev->intr_handle;
>
> + /* Clear event callbacks, `VIRTCHNL_EVENT_DCF_VSI_MAP_UPDATE`
> + * event will be ignored and all running `ice-thread` threads
> + * will exit quickly.
> + */
> + hw->vc_event_msg_cb = NULL;
> +
> if (hw->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_QOS)
> if (hw->tm_conf.committed) {
> ice_dcf_clear_bw(hw);
> @@ -760,6 +773,10 @@ ice_dcf_uninit_hw(struct rte_eth_dev *eth_dev,
> struct ice_dcf_hw *hw)
> rte_intr_callback_unregister(intr_handle,
> ice_dcf_dev_interrupt_handler, hw);
>
> + /* Wait for all `ice-thread` threads to exit. */
> + while (hw->vsi_update_thread_num != 0)
> + rte_delay_ms(ICE_DCF_ARQ_CHECK_TIME);
> +
> ice_dcf_mode_disable(hw);
> iavf_shutdown_adminq(&hw->avf);
>
> diff --git a/drivers/net/ice/ice_dcf.h b/drivers/net/ice/ice_dcf.h index
> 7f42ebabe9..f95ef2794c 100644
> --- a/drivers/net/ice/ice_dcf.h
> +++ b/drivers/net/ice/ice_dcf.h
> @@ -105,6 +105,9 @@ struct ice_dcf_hw {
> void (*vc_event_msg_cb)(struct ice_dcf_hw *dcf_hw,
> uint8_t *msg, uint16_t msglen);
>
> + rte_spinlock_t vsi_thread_lock;
> + int vsi_update_thread_num;
> +
> uint8_t *arq_buf;
>
> uint16_t num_vfs;
> diff --git a/drivers/net/ice/ice_dcf_parent.c
> b/drivers/net/ice/ice_dcf_parent.c
> index 01e390ddda..e48eb69c1a 100644
> --- a/drivers/net/ice/ice_dcf_parent.c
> +++ b/drivers/net/ice/ice_dcf_parent.c
> @@ -130,6 +130,9 @@ ice_dcf_vsi_update_service_handler(void *param)
>
> rte_spinlock_lock(&vsi_update_lock);
>
> + if (hw->vc_event_msg_cb == NULL)
> + goto update_end;
> +
> if (!ice_dcf_handle_vsi_update_event(hw)) {
> __atomic_store_n(&parent_adapter->dcf_state_on, true,
> __ATOMIC_RELAXED);
> @@ -150,10 +153,14 @@ ice_dcf_vsi_update_service_handler(void *param)
> if (hw->tm_conf.committed)
> ice_dcf_replay_vf_bw(hw, reset_param->vf_id);
>
> +update_end:
> rte_spinlock_unlock(&vsi_update_lock);
>
> free(param);
>
> + rte_spinlock_lock(&hw->vsi_thread_lock);
> + hw->vsi_update_thread_num--;
> + rte_spinlock_unlock(&hw->vsi_thread_lock);
> return NULL;
> }
>
> @@ -183,6 +190,10 @@ start_vsi_reset_thread(struct ice_dcf_hw *dcf_hw,
> bool vfr, uint16_t vf_id)
> PMD_DRV_LOG(ERR, "Failed to start the thread for reset
> handling");
> free(param);
> }
> +
> + rte_spinlock_lock(&dcf_hw->vsi_thread_lock);
> + dcf_hw->vsi_update_thread_num++;
> + rte_spinlock_unlock(&dcf_hw->vsi_thread_lock);
I think you can define vsi_update_thread_num as rte_atomic32_t and use
rte_atomic32_add/sub
> }
>
> static uint32_t
> @@ -262,6 +273,18 @@ ice_dcf_handle_pf_event_msg(struct ice_dcf_hw
> *dcf_hw,
> PMD_DRV_LOG(DEBUG,
> "VIRTCHNL_EVENT_PF_DRIVER_CLOSE event");
> break;
> case VIRTCHNL_EVENT_DCF_VSI_MAP_UPDATE:
> + /* If the event handling callback is empty, the event cannot
> + * be handled. Therefore we ignore this event.
> + */
> + if (dcf_hw->vc_event_msg_cb == NULL) {
> + PMD_DRV_LOG(DEBUG,
> + "VIRTCHNL_EVENT_DCF_VSI_MAP_UPDATE
> event "
> + "received: VF%u with VSI num %u, ignore
> processing",
> + pf_msg->event_data.vf_vsi_map.vf_id,
> + pf_msg->event_data.vf_vsi_map.vsi_id);
> + break;
> + }
> +
> PMD_DRV_LOG(DEBUG,
> "VIRTCHNL_EVENT_DCF_VSI_MAP_UPDATE event : VF%u with VSI num %u",
> pf_msg->event_data.vf_vsi_map.vf_id,
> pf_msg->event_data.vf_vsi_map.vsi_id);
> --
> 2.25.1
