> -----邮件原件-----
> 发件人: Konstantin Ananyev <konstantin.anan...@huawei.com>
> 发送时间: Tuesday, February 28, 2023 3:36 AM
> 收件人: Feifei Wang <feifei.wa...@arm.com>; Konstantin Ananyev
> <konstantin.v.anan...@yandex.ru>; Yuying Zhang
> <yuying.zh...@intel.com>; Beilei Xing <beilei.x...@intel.com>; Ruifeng
> Wang <ruifeng.w...@arm.com>
> 抄送: dev@dpdk.org; nd <n...@arm.com>; Honnappa Nagarahalli
> <honnappa.nagaraha...@arm.com>; nd <n...@arm.com>
> 主题: RE: [PATCH v3 2/3] net/i40e: enable direct rearm with separate API
>
>
>
> > > > +int
> > > > +i40e_tx_fill_sw_ring(void *tx_queue,
> > > > + struct rte_eth_rxq_rearm_data *rxq_rearm_data) {
> > > > + struct i40e_tx_queue *txq = tx_queue;
> > > > + struct i40e_tx_entry *txep;
> > > > + void **rxep;
> > > > + struct rte_mbuf *m;
> > > > + int i, n;
> > > > + int nb_rearm = 0;
> > > > +
> > > > + if (*rxq_rearm_data->rearm_nb < txq->tx_rs_thresh ||
> > > > + txq->nb_tx_free > txq->tx_free_thresh)
> > > > + return 0;
> > > > +
> > > > + /* check DD bits on threshold descriptor */
> > > > + if ((txq->tx_ring[txq->tx_next_dd].cmd_type_offset_bsz &
> > > > + rte_cpu_to_le_64(I40E_TXD_QW1_DTYPE_MASK)) !=
> > > > +
> > > rte_cpu_to_le_64(I40E_TX_DESC_DTYPE_DESC_DONE))
> > > > + return 0;
> > > > +
> > > > + n = txq->tx_rs_thresh;
> > > > +
> > > > + /* first buffer to free from S/W ring is at index
> > > > + * tx_next_dd - (tx_rs_thresh-1)
> > > > + */
> > > > + txep = &txq->sw_ring[txq->tx_next_dd - (n - 1)];
> > > > + rxep = rxq_rearm_data->rx_sw_ring;
> > > > + rxep += *rxq_rearm_data->rearm_start;
> > > > +
> > > > + if (txq->offloads & RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE) {
> > > > + /* directly put mbufs from Tx to Rx */
> > > > + for (i = 0; i < n; i++, rxep++, txep++)
> > > > + *rxep = txep[0].mbuf;
> > > > + } else {
> > > > + for (i = 0; i < n; i++, rxep++) {
> > > > + m = rte_pktmbuf_prefree_seg(txep[i].mbuf);
>
> One thing I forgot to ask:
> What would happen if this mbuf belongs to different mempool (not one that
> we specify at rx_queue_setup())?
> Do we need to check it here?
> Or would it be upper layer constraint?
> Or...?
>
First, 'different mempool' is valid for no FAST_FREE path in tx_free_buffers.
If buffers belong to different mempool, we can have an example here:
Buffer 1 from mempool 1, its recycle path is:
-----------------------------------------------------------------------------------------
1. queue_setup: rearm from mempool 1 into Rx sw-ring
2. rte_eth_Rx_burst: used by user app (Rx)
3. rte_eth_Tx_burst: mount on Tx sw-ring
4. rte_eth_direct_rearm: free into Rx sw-ring:
or
tx_free_buffers: free into mempool 1 (no fast_free path)
-----------------------------------------------------------------------------------------
Buffer 2 from mempool 2, its recycle path is:
-----------------------------------------------------------------------------------------
1. queue_setup: rearm from mempool 2 into Rx sw-ring
2. rte_eth_Rx_burst: used by user app (Rx)
3. rte_eth_Tx_burst: mount on Tx sw-ring
4. rte_eth_direct_rearm: free into Rx sw-ring
or
tx_free_buffers: free into mempool 2 (no fast_free_path)
-----------------------------------------------------------------------------------------
Thus, buffers from Tx different mempools are the same for Rx. The difference
point
is that they will be freed into different mempool if the thread uses generic
free buffers.
I think this cannot affect direct-rearm mode, and we do not need to check this.
> > > > + if (m != NULL) {
> > > > + *rxep = m;
> > > > + nb_rearm++;
> > > > + }
> > > > + }
> > > > + n = nb_rearm;
> > > > + }
> > > > +
> > > > + /* update counters for Tx */
> > > > + txq->nb_tx_free = (uint16_t)(txq->nb_tx_free +
> > > > txq->tx_rs_thresh);
> > > > + txq->tx_next_dd = (uint16_t)(txq->tx_next_dd +
> > > > txq->tx_rs_thresh);
> > > > + if (txq->tx_next_dd >= txq->nb_tx_desc)
> > > > + txq->tx_next_dd = (uint16_t)(txq->tx_rs_thresh - 1);
> > > > +
> > > > + return n;
> > > > +}
> > > > +
