This patch adds the new phy affinity item support in PMD:
RTE_FLOW_ITEM_TYPE_PHY_AFFINITY.
This patch adds the validation function for the new item,
it works for NIC-RX and FDB rule on ROOT-table only.
Signed-off-by: Jiawei Wang <jiaw...@nvidia.com>
---
doc/guides/nics/features/default.ini | 1 +
doc/guides/nics/features/mlx5.ini | 1 +
doc/guides/nics/mlx5.rst | 8 ++-
drivers/net/mlx5/linux/mlx5_os.c | 2 +
drivers/net/mlx5/mlx5.h | 1 +
drivers/net/mlx5/mlx5_flow.h | 3 +
drivers/net/mlx5/mlx5_flow_dv.c | 100 ++++++++++++++++++++++++++-
drivers/net/mlx5/mlx5_flow_hw.c | 14 ++++
8 files changed, 127 insertions(+), 3 deletions(-)
diff --git a/doc/guides/nics/features/default.ini
b/doc/guides/nics/features/default.ini
index 510cc6679d..fd5edd11c8 100644
--- a/doc/guides/nics/features/default.ini
+++ b/doc/guides/nics/features/default.ini
@@ -141,6 +141,7 @@ udp =
vlan =
vxlan =
vxlan_gpe =
+phy_affinity =
[rte_flow actions]
age =
diff --git a/doc/guides/nics/features/mlx5.ini
b/doc/guides/nics/features/mlx5.ini
index 62fd330e2b..9142f04f93 100644
--- a/doc/guides/nics/features/mlx5.ini
+++ b/doc/guides/nics/features/mlx5.ini
@@ -87,6 +87,7 @@ vlan = Y
vxlan = Y
vxlan_gpe = Y
represented_port = Y
+phy_affinity = Y
[rte_flow actions]
age = I
diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index f137f156f9..5569b045d7 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -106,6 +106,7 @@ Features
- Sub-Function representors.
- Sub-Function.
- Matching on represented port.
+- Matching on phy affinity.
Limitations
@@ -595,13 +596,18 @@ Limitations
- key
- sequence
- Matching on checksum and sequence needs MLNX_OFED 5.6+.
+- Matching on checksum and sequence needs MLNX_OFED 5.6+.
- The NIC egress flow rules on representor port are not supported.
- When using DV/verbs flow engine (``dv_flow_en`` = 1/0 respectively), Match
on SPI field
in ESP header for group 0 needs MLNX_OFED 5.6+.
+- Match on phy affinity:
+
+ - Supports NIC ingress flow in group 0.
+ - Supports E-Switch flow in group 0 and depends on
+ device-managed flow steering (DMFS) mode.
Statistics
----------
diff --git a/drivers/net/mlx5/linux/mlx5_os.c b/drivers/net/mlx5/linux/mlx5_os.c
index 60462da39d..1c26b30702 100644
--- a/drivers/net/mlx5/linux/mlx5_os.c
+++ b/drivers/net/mlx5/linux/mlx5_os.c
@@ -1394,6 +1394,8 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
sh->lag_rx_port_affinity_en = 1;
DRV_LOG(DEBUG, "LAG Rx Port Affinity enabled");
}
+ priv->num_lag_ports = hca_attr->num_lag_ports;
+ DRV_LOG(DEBUG, "The number of lag ports is %d",
priv->num_lag_ports);
}
/* Process parameters and store port configuration on priv structure. */
err = mlx5_port_args_config(priv, mkvlist, &priv->config);
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index bbd7262a51..c7a7b176b8 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -1668,6 +1668,7 @@ struct mlx5_priv {
unsigned int mtr_reg_share:1; /* Whether support meter REG_C share. */
unsigned int lb_used:1; /* Loopback queue is referred to. */
uint32_t mark_enabled:1; /* If mark action is enabled on rxqs. */
+ uint32_t num_lag_ports:4; /* Number of ports can be bonded. */
uint16_t domain_id; /* Switch domain identifier. */
uint16_t vport_id; /* Associated VF vport index (if any). */
uint32_t vport_meta_tag; /* Used for vport index match ove VF LAG. */
diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
index e376dcae93..64b1b7c37c 100644
--- a/drivers/net/mlx5/mlx5_flow.h
+++ b/drivers/net/mlx5/mlx5_flow.h
@@ -219,6 +219,9 @@ enum mlx5_feature_name {
/* Meter color item */
#define MLX5_FLOW_ITEM_METER_COLOR (UINT64_C(1) << 44)
+/* PHY affinity item */
+#define MLX5_FLOW_ITEM_PHY_AFFINITY (UINT64_C(1) << 49)
+
/* Outer Masks. */
#define MLX5_FLOW_LAYER_OUTER_L3 \
(MLX5_FLOW_LAYER_OUTER_L3_IPV4 | MLX5_FLOW_LAYER_OUTER_L3_IPV6)
diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index 7ca909999b..994f184aaf 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -3764,6 +3764,75 @@ flow_dv_validate_item_meter_color(struct rte_eth_dev
*dev,
return 0;
}
+/**
+ * Validate Phy affinity item.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in] item
+ * Item specification.
+ * @param[in] attr
+ * Attributes of flow that includes this item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_item_phy_affinity(struct rte_eth_dev *dev,
+ const struct rte_flow_item *item,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ const struct rte_flow_item_phy_affinity *spec = item->spec;
+ const struct rte_flow_item_phy_affinity *mask = item->mask;
+ struct rte_flow_item_phy_affinity nic_mask = {
+ .affinity = UINT8_MAX
+ };
+ int ret;
+
+ if (!priv->sh->lag_rx_port_affinity_en)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, NULL,
+ "Unsupported phy affinity with Older
FW");
+ if ((attr->transfer && priv->fdb_def_rule) ||
+ attr->egress || attr->group)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item->spec,
+ "phy affinity is not supported with
egress or FDB on non root table");
+ if (!spec)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item->spec,
+ "data cannot be empty");
+ if (spec->affinity == 0)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item->spec,
+ "zero affinity number not supported");
+ if (spec->affinity > priv->num_lag_ports)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item->spec,
+ "exceed max affinity number in lag
ports");
+ if (!mask)
+ mask = &rte_flow_item_phy_affinity_mask;
+ if (!mask->affinity)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC, NULL,
+ "mask cannot be zero");
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_phy_affinity),
+ MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
int
flow_dv_encap_decap_match_cb(void *tool_ctx __rte_unused,
struct mlx5_list_entry *entry, void *cb_ctx)
@@ -7443,6 +7512,13 @@ flow_dv_validate(struct rte_eth_dev *dev, const struct
rte_flow_attr *attr,
return ret;
last_item = MLX5_FLOW_ITEM_METER_COLOR;
break;
+ case RTE_FLOW_ITEM_TYPE_PHY_AFFINITY:
+ ret = flow_dv_validate_item_phy_affinity(dev, items,
+ attr, error);
+ if (ret < 0)
+ return ret;
+ last_item = MLX5_FLOW_ITEM_PHY_AFFINITY;
+ break;
default:
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM,
@@ -9981,7 +10057,7 @@ flow_dv_translate_item_tag(struct rte_eth_dev *dev, void
*key,
const struct rte_flow_item_tag *tag_vv = item->spec;
const struct rte_flow_item_tag *tag_v;
const struct rte_flow_item_tag *tag_m;
- enum modify_reg reg;
+ int reg;
uint32_t index;
if (MLX5_ITEM_VALID(item, key_type))
@@ -9996,7 +10072,7 @@ flow_dv_translate_item_tag(struct rte_eth_dev *dev, void
*key,
else
reg = flow_hw_get_reg_id(RTE_FLOW_ITEM_TYPE_TAG, index);
MLX5_ASSERT(reg > 0);
- flow_dv_match_meta_reg(key, reg, tag_v->data, tag_m->data);
+ flow_dv_match_meta_reg(key, (enum modify_reg)reg, tag_v->data,
tag_m->data);
}
/**
@@ -10639,6 +10715,22 @@ flow_dv_translate_item_meter_color(struct rte_eth_dev
*dev, void *key,
flow_dv_match_meta_reg(key, (enum modify_reg)reg, value, mask);
}
+static void
+flow_dv_translate_item_phy_affinity(void *key,
+ const struct rte_flow_item *item,
+ uint32_t key_type)
+{
+ const struct rte_flow_item_phy_affinity *affinity_v;
+ const struct rte_flow_item_phy_affinity *affinity_m;
+ void *misc_v;
+
+ MLX5_ITEM_UPDATE(item, key_type, affinity_v, affinity_m,
+ &rte_flow_item_phy_affinity_mask);
+ misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
+ MLX5_SET(fte_match_set_misc, misc_v, lag_rx_port_affinity,
+ affinity_v->affinity & affinity_m->affinity);
+}
+
static uint32_t matcher_zero[MLX5_ST_SZ_DW(fte_match_param)] = { 0 };
#define HEADER_IS_ZERO(match_criteria, headers)
\
@@ -13430,6 +13522,10 @@ flow_dv_translate_items(struct rte_eth_dev *dev,
last_item = flow_dv_translate_item_integrity(items,
wks, key_type);
break;
+ case RTE_FLOW_ITEM_TYPE_PHY_AFFINITY:
+ flow_dv_translate_item_phy_affinity(key, items, key_type);
+ last_item = MLX5_FLOW_ITEM_PHY_AFFINITY;
+ break;
default:
break;
}
diff --git a/drivers/net/mlx5/mlx5_flow_hw.c b/drivers/net/mlx5/mlx5_flow_hw.c
index 20c71ff7f0..e5ca86ca4b 100644
--- a/drivers/net/mlx5/mlx5_flow_hw.c
+++ b/drivers/net/mlx5/mlx5_flow_hw.c
@@ -4715,6 +4715,20 @@ flow_hw_pattern_validate(struct rte_eth_dev *dev,
"Unsupported meter
color register");
break;
}
+ case RTE_FLOW_ITEM_TYPE_PHY_AFFINITY:
+ {
+ if (!priv->sh->lag_rx_port_affinity_en)
+ return rte_flow_error_set(error, EINVAL,
+
RTE_FLOW_ERROR_TYPE_ITEM, NULL,
+ "Unsupported phy
affinity with Older FW");
+ if ((attr->transfer && priv->fdb_def_rule) ||
attr->egress)
+ return rte_flow_error_set(error, EINVAL,
+
RTE_FLOW_ERROR_TYPE_ITEM, NULL,
+ "Phy affinity item
not supported"
+ " with egress or
transfer"
+ " attribute");
+ break;
+ }
case RTE_FLOW_ITEM_TYPE_VOID:
case RTE_FLOW_ITEM_TYPE_ETH:
case RTE_FLOW_ITEM_TYPE_VLAN:
--
2.18.1
