Add '--txonly-tso-mss=N' option that enables TSO offload
and generates packets with specified MSS in txonly mode.

Signed-off-by: Georgiy Levashov <georgiy.levas...@oktetlabs.ru>
Signed-off-by: Ivan Ilchenko <ivan.ilche...@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybche...@oktetlabs.ru>
---
 app/test-pmd/parameters.c             | 10 ++++++++
 app/test-pmd/testpmd.c                | 12 ++++++++++
 app/test-pmd/testpmd.h                |  1 +
 app/test-pmd/txonly.c                 | 34 ++++++++++++++++++++++++++-
 doc/guides/testpmd_app_ug/run_app.rst |  4 ++++
 5 files changed, 60 insertions(+), 1 deletion(-)

diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 2ed8afedfd..e71cb3e139 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -156,6 +156,7 @@ usage(char* progname)
        printf("  --txpkts=X[,Y]*: set TX segment sizes"
                " or total packet length.\n");
        printf("  --txonly-multi-flow: generate multiple flows in txonly 
mode\n");
+       printf("  --txonly-tso-mss=N: enable TSO offload and generate packets 
with specified MSS in txonly mode\n");
        printf("  --tx-ip=src,dst: IP addresses in Tx-only mode\n");
        printf("  --tx-udp=src[,dst]: UDP ports in Tx-only mode\n");
        printf("  --eth-link-speed: force link speed.\n");
@@ -670,6 +671,7 @@ launch_args_parse(int argc, char** argv)
                { "rxhdrs",                     1, 0, 0 },
                { "txpkts",                     1, 0, 0 },
                { "txonly-multi-flow",          0, 0, 0 },
+               { "txonly-tso-mss",             1, 0, 0 },
                { "rxq-share",                  2, 0, 0 },
                { "eth-link-speed",             1, 0, 0 },
                { "disable-link-check",         0, 0, 0 },
@@ -1297,6 +1299,14 @@ launch_args_parse(int argc, char** argv)
                        }
                        if (!strcmp(lgopts[opt_idx].name, "txonly-multi-flow"))
                                txonly_multi_flow = 1;
+                       if (!strcmp(lgopts[opt_idx].name, "txonly-tso-mss")) {
+                               n = atoi(optarg);
+                               if (n >= 0 && n <= UINT16_MAX)
+                                       txonly_tso_segsz = n;
+                               else
+                                       rte_exit(EXIT_FAILURE,
+                                                "TSO MSS must be >= 0 and <= 
UINT16_MAX\n");
+                       }
                        if (!strcmp(lgopts[opt_idx].name, "rxq-share")) {
                                if (optarg == NULL) {
                                        rxq_share = UINT32_MAX;
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index ef281ccd20..94d37be692 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -264,6 +264,9 @@ enum tx_pkt_split tx_pkt_split = TX_PKT_SPLIT_OFF;
 uint8_t txonly_multi_flow;
 /**< Whether multiple flows are generated in TXONLY mode. */
 
+uint16_t txonly_tso_segsz;
+/**< TSO MSS for generated packets in TXONLY mode. */
+
 uint32_t tx_pkt_times_inter;
 /**< Timings for send scheduling in TXONLY mode, time between bursts. */
 
@@ -1615,6 +1618,15 @@ init_config_port_offloads(portid_t pid, uint32_t 
socket_id)
                port->dev_conf.txmode.offloads &=
                        ~RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE;
 
+       if (txonly_tso_segsz > 0) {
+               if ((ports[pid].dev_info.tx_offload_capa &
+                   RTE_ETH_TX_OFFLOAD_TCP_TSO) == 0) {
+                       rte_exit(EXIT_FAILURE,
+                                "TSO isn't supported for port %d\n", pid);
+               }
+               port->dev_conf.txmode.offloads |= RTE_ETH_TX_OFFLOAD_TCP_TSO;
+       }
+
        /* Apply Rx offloads configuration */
        for (i = 0; i < port->dev_info.max_rx_queues; i++)
                port->rxq[i].conf.offloads = port->dev_conf.rxmode.offloads;
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 976f4f83dd..fbe1839a8f 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -611,6 +611,7 @@ enum tx_pkt_split {
 extern enum tx_pkt_split tx_pkt_split;
 
 extern uint8_t txonly_multi_flow;
+extern uint16_t txonly_tso_segsz;
 
 extern uint32_t rxq_share;
 
diff --git a/app/test-pmd/txonly.c b/app/test-pmd/txonly.c
index b304bd4bf8..59fdb5f953 100644
--- a/app/test-pmd/txonly.c
+++ b/app/test-pmd/txonly.c
@@ -60,6 +60,7 @@ RTE_DEFINE_PER_LCORE(uint8_t, _ip_var); /**< IP address 
variation */
 
 static union pkt_l4_hdr_t {
        struct rte_udp_hdr udp; /**< UDP header of tx packets. */
+       struct rte_tcp_hdr tcp; /**< TCP header of tx packets. */
 } pkt_l4_hdr; /**< Layer 4 header of tx packets. */
 
 static uint64_t timestamp_mask; /**< Timestamp dynamic flag mask */
@@ -112,8 +113,19 @@ setup_pkt_l4_ip_headers(uint8_t ip_proto, struct 
rte_ipv4_hdr *ip_hdr,
        uint32_t ip_cksum;
        uint16_t pkt_len;
        struct rte_udp_hdr *udp_hdr;
+       struct rte_tcp_hdr *tcp_hdr;
 
        switch (ip_proto) {
+       case IPPROTO_TCP:
+               /*
+                * Initialize TCP header.
+                */
+               pkt_len = (uint16_t)(pkt_data_len + sizeof(struct rte_tcp_hdr));
+               tcp_hdr = &l4_hdr->tcp;
+               tcp_hdr->src_port = rte_cpu_to_be_16(tx_l4_src_port);
+               tcp_hdr->dst_port = rte_cpu_to_be_16(tx_l4_dst_port);
+               tcp_hdr->data_off = (sizeof(struct rte_tcp_hdr) << 2) & 0xF0;
+               break;
        case IPPROTO_UDP:
                /*
                 * Initialize UDP header.
@@ -189,6 +201,8 @@ update_pkt_header(struct rte_mbuf *pkt, uint32_t 
total_pkt_len)
        ip_hdr->hdr_checksum = rte_ipv4_cksum(ip_hdr);
 
        switch (ip_hdr->next_proto_id) {
+       case IPPROTO_TCP:
+               break;
        case IPPROTO_UDP:
                /* update UDP packet length */
                udp_hdr = rte_pktmbuf_mtod_offset(pkt, struct rte_udp_hdr *,
@@ -232,6 +246,12 @@ pkt_burst_prepare(struct rte_mbuf *pkt, struct rte_mempool 
*mbp,
        pkt->l2_len = sizeof(struct rte_ether_hdr);
        pkt->l3_len = sizeof(struct rte_ipv4_hdr);
 
+       if (txonly_tso_segsz > 0) {
+               pkt->tso_segsz = txonly_tso_segsz;
+               pkt->ol_flags |= RTE_MBUF_F_TX_TCP_SEG | RTE_MBUF_F_TX_IPV4 |
+                                RTE_MBUF_F_TX_IP_CKSUM;
+       }
+
        pkt_len = pkt->data_len;
        pkt_seg = pkt;
        for (i = 1; i < nb_segs; i++) {
@@ -267,6 +287,12 @@ pkt_burst_prepare(struct rte_mbuf *pkt, struct rte_mempool 
*mbp,
                RTE_PER_LCORE(_ip_var) = ip_var;
        }
        switch (ip_hdr->next_proto_id) {
+       case IPPROTO_TCP:
+               copy_buf_to_pkt(&pkt_l4_hdr.tcp, sizeof(pkt_l4_hdr.tcp), pkt,
+                               sizeof(struct rte_ether_hdr) +
+                               sizeof(struct rte_ipv4_hdr));
+               l4_hdr_size = sizeof(pkt_l4_hdr.tcp);
+               break;
        case IPPROTO_UDP:
                copy_buf_to_pkt(&pkt_l4_hdr.udp, sizeof(pkt_l4_hdr.udp), pkt,
                                sizeof(struct rte_ether_hdr) +
@@ -277,6 +303,7 @@ pkt_burst_prepare(struct rte_mbuf *pkt, struct rte_mempool 
*mbp,
                l4_hdr_size = 0;
                break;
        }
+       pkt->l4_len = l4_hdr_size;
 
        if (unlikely(tx_pkt_split == TX_PKT_SPLIT_RND) || txonly_multi_flow)
                update_pkt_header(pkt, pkt_len);
@@ -459,11 +486,16 @@ tx_only_begin(portid_t pi)
 {
        uint16_t pkt_hdr_len, pkt_data_len;
        int dynf;
-       uint8_t ip_proto = IPPROTO_UDP;
+       uint8_t ip_proto;
 
        pkt_hdr_len = (uint16_t)(sizeof(struct rte_ether_hdr) +
                                 sizeof(struct rte_ipv4_hdr));
+
+       ip_proto = txonly_tso_segsz > 0 ? IPPROTO_TCP : IPPROTO_UDP;
        switch (ip_proto) {
+       case IPPROTO_TCP:
+               pkt_hdr_len += sizeof(struct rte_tcp_hdr);
+               break;
        case IPPROTO_UDP:
                pkt_hdr_len += sizeof(struct rte_udp_hdr);
                break;
diff --git a/doc/guides/testpmd_app_ug/run_app.rst 
b/doc/guides/testpmd_app_ug/run_app.rst
index 610e442924..01d6852fd3 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -369,6 +369,10 @@ The command line options are:
 
     Generate multiple flows in txonly mode.
 
+*   ``--txonly-tso-mss=N```
+
+    Enable TSO offload and generate TCP packets with specified MSS in txonly 
mode.
+
 *   ``--rxq-share=[X]``
 
     Create queues in shared Rx queue mode if device supports.
-- 
2.30.2

Reply via email to