On 10/14/22 11:41, fengchengwen wrote: > Hi Ilya, > > I have some questions about has_vlan/has_more_vlan fields:
I think, these questions are more for rte_flow maintainers, but I'll try answer. Maintainers can correct me if I'm wrong. > > a\ DPDK framework support cvlan-tag(0x8100) and svlan-tag(0x88A8), and > also deprecated qinq-tag(eg. 0x9100) Didn't check, but sounds about right. > b\ If has_vlan is used, does it mean that all the VLAN > tags(0x8100/88A8/9100) must be matched ? > I think this is different from using type, which can only match one of > them. I think so. has_vlan = 1 means that packet has some vlan regardless of the actual type of the vlan header. > c\ And has_more_vlan has the same function as has_vlan ? Yes, from my understanding, 'has_more_vlan' is the same as 'has_vlan', but for the 'inner_type'. > d\ What the problems are solved by the new two fields? One of the problems we solved in OVS by using these fields is that we need a way to match on the fact that there is a vlan, but we do not care what this vlan tag is and at the same time we want to match on the inner type for such packets. Trying to workaround that situation will likely require breaking the 1:1 mapping between OVS flows and rte_flow rules, so it is not really possible. In the end, we had to use 'has_vlan' field to fix an incorrect packet matching in OVS. Alternative, I guess, would be to just not offload vlan flows, but doesn't make a lot of sense. Eli should know better what was the actual problem, I think. > > > If the above understanding is correct, and the hardware support identify > there TPID(cvlan-0x8100, svlan-0x88A8, dqing-0x9100) as VLAN, then: > Rule: eth has_vlan is 1 / vlan vid is 100 / ipv4 / end actions xxx > Result: all ipv4 packets with at least one VLAN(the TPID can be one of > the above) and the vid is 100 can be matched. > > Rule: eth type is 0x8100 / vlan vid is 100 / ipv4 / end actions xxx > Result: all ipv4 packets with at lease one VLAN(which TPID must be > 0x8100) and the vid is 100 can be matched. > > Rule: eth has_vlan is 1 / vlan vid is 100 has_more_vlan is 1 / vlan vid > is 200 / ipv4 / end action xxx > Result: all ipv4 packets with at least two VLAN(the TPID can be one of > the above) and outer vid is 100 and the next vid is 200 can be matched. > > Rule: eth type is 0x88A8 / vlan vid is 100 inner_type is 0x8100 / vlan > vid is 200 / ipv4 / end action xxx > Result: all ipv4 packets with at least two VLAN(the first TPID is 0x88A8 > and second TPID is 0x8100) and outer vid is 100 and the next vid is 200 can > be matched. > Is the above result correct ? Seems correct, but I don't have much experience with rte_flow notations. Ori, could you comment on this? Best regards, Ilya Maximets. > > Thanks > > On 2022/10/13 18:48, Ilya Maximets wrote: >> 'has_vlan' attribute is only supported by sfc, mlx5 and cnxk. >> Other drivers doesn't support it. Most of them (like i40e) just >> ignore it silently. Some drivers (like mlx4) never had a full >> support of the eth item even before introduction of 'has_vlan' >> (mlx4 allows to match on the destination MAC only). >> >> Same for the 'has_more_vlan' flag of the vlan item. >> >> 'has_vlan' is part of 'rte_flow_item_eth', so changing 'eth' >> field to 'partial support' in documentation for all such drivers. >> 'has_more_vlan' is part of 'rte_flow_item_vlan', so changing >> 'vlan' to 'partial support' as well. >> >> This doesn't solve the issue, but at least marks the problematic >> drivers. >> >> Some details are available in: >> https://bugs.dpdk.org/show_bug.cgi?id=958 >> >> Fixes: 09315fc83861 ("ethdev: add VLAN attributes to ethernet and VLAN >> items") >> Cc: sta...@dpdk.org >> >> Signed-off-by: Ilya Maximets <i.maxim...@ovn.org> >> --- >> >> Version 2: >> - Rebased on a current main branch. >> - Added more clarifications to the commit message. >> >> I added the stable in CC, but the patch should be extended while >> backporting. For 21.11 the cnxk driver should be also updated, >> for 20.11, sfc driver should also be included. >> >> doc/guides/nics/features/bnxt.ini | 4 ++-- >> doc/guides/nics/features/cxgbe.ini | 4 ++-- >> doc/guides/nics/features/dpaa2.ini | 4 ++-- >> doc/guides/nics/features/e1000.ini | 2 +- >> doc/guides/nics/features/enic.ini | 4 ++-- >> doc/guides/nics/features/hinic.ini | 2 +- >> doc/guides/nics/features/hns3.ini | 4 ++-- >> doc/guides/nics/features/i40e.ini | 4 ++-- >> doc/guides/nics/features/iavf.ini | 4 ++-- >> doc/guides/nics/features/ice.ini | 4 ++-- >> doc/guides/nics/features/igc.ini | 2 +- >> doc/guides/nics/features/ipn3ke.ini | 4 ++-- >> doc/guides/nics/features/ixgbe.ini | 4 ++-- >> doc/guides/nics/features/mlx4.ini | 4 ++-- >> doc/guides/nics/features/mvpp2.ini | 4 ++-- >> doc/guides/nics/features/tap.ini | 4 ++-- >> doc/guides/nics/features/txgbe.ini | 4 ++-- >> 17 files changed, 31 insertions(+), 31 deletions(-)
