> -----Original Message-----
> From: Olivier Matz <olivier.m...@6wind.com>
> Sent: Thursday, October 13, 2022 10:46 PM
> To: Wu, Wenjun1 <wenjun1...@intel.com>
> Cc: dev@dpdk.org; Yang, Qiming <qiming.y...@intel.com>; Zhao1, Wei
> <wei.zh...@intel.com>
> Subject: Re: [PATCH] net/ixgbevf: fix promiscuous and allmulti
>
> Hi Wenjun,
>
> On Mon, Oct 10, 2022 at 01:30:54AM +0000, Wu, Wenjun1 wrote:
> > Hi Olivier,
> >
> > > -----Original Message-----
> > > From: Olivier Matz <olivier.m...@6wind.com>
> > > Sent: Thursday, September 29, 2022 8:22 PM
> > > To: dev@dpdk.org
> > > Cc: Yang, Qiming <qiming.y...@intel.com>; Wu, Wenjun1
> > > <wenjun1...@intel.com>; Zhao1, Wei <wei.zh...@intel.com>
> > > Subject: [PATCH] net/ixgbevf: fix promiscuous and allmulti
> > >
> > > The configuration of allmulti and promiscuous modes conflicts
> > > together. For instance, if we enable promiscuous mode, then enable
> > > and disable allmulti, then the promiscuous mode is wrongly disabled.
> > >
> > > Fix this behavior by:
> > > - doing nothing when we set/unset allmulti if promiscuous mode is on
> > > - restorting the proper mode (none or allmulti) when we disable
> > > promiscuous mode
> > >
> > > Fixes: 1f4564ed7696 ("net/ixgbevf: enable promiscuous mode")
> > >
> > > Signed-off-by: Olivier Matz <olivier.m...@6wind.com>
> > > ---
> > >
> > > Hi,
> > >
> > > For reference, this was tested with this plan:
> > >
> > > echo 8 > "/sys/bus/pci/devices/0000:01:00.1/sriov_numvfs"
> > > ip link set dev eno2 up
> > > ip link set dev eno2 promisc on
> > > bridge link set dev eno2 hwmode veb
> > > ip link set dev eno2 mtu 9000
> > >
> > > ip link set dev eno2 vf 0 mac ac:1f:6b:fe:ba:b0 ip link set dev eno2
> > > vf 0 spoofchk off ip link set dev eno2 vf 0 trust on
> > >
> > > ip link set dev eno2 vf 1 mac ac:1f:6b:fe:ba:b1 ip link set dev eno2
> > > vf 1 spoofchk off ip link set dev eno2 vf 1 trust on
> > >
> > > python3 usertools/dpdk-devbind.py -s
> > > python3 usertools/dpdk-devbind.py -b vfio-pci 0000:01:10.1 # vf 0
> > > python3 usertools/dpdk-devbind.py -b ixgbevf 0000:01:10.3 # vf 1
> > >
> > >
> > > # in another terminal
> > > scapy
> > > while True:
> > > sendp(Ether(dst='ac:1f:6b:00:00:00'), iface='eno2v1') # wrong mac
> > > sendp(Ether(dst='ac:1f:6b:fe:ba:b0'), iface='eno2v1') # correct mac
> > > time.sleep(1)
> > >
> > >
> > > ./build/app/dpdk-testpmd -l 1,2 -a 0000:01:10.1 -- -i --total-num-
> > > mbufs=32768 show port info all set fwd rxonly set verbose 1 set
> > > promisc all off set allmulti all off start
> > >
> > > # ok, only packets to dst='ac:1f:6b:fe:ba:b0' are received
> > >
> > >
> > > # ok, both packets are received
> > > set promisc all on
> > >
> > >
> > > # nok, only packets to dst='ac:1f:6b:fe:ba:b0' are received set
> > > allmulti all on set allmulti all off
> > >
> > >
> > > drivers/net/ixgbe/ixgbe_ethdev.c | 12 +++++++++++-
> > > 1 file changed, 11 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c
> > > b/drivers/net/ixgbe/ixgbe_ethdev.c
> > > index 8cec951d94..cc8383c5a9 100644
> > > --- a/drivers/net/ixgbe/ixgbe_ethdev.c
> > > +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
> > > @@ -7785,9 +7785,13 @@ static int
> > > ixgbevf_dev_promiscuous_disable(struct rte_eth_dev *dev) {
> > > struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data-
> > > >dev_private);
> > > + int mode = IXGBEVF_XCAST_MODE_NONE;
> > > int ret;
> > >
> > > - switch (hw->mac.ops.update_xcast_mode(hw,
> > > IXGBEVF_XCAST_MODE_NONE)) {
> > > + if (dev->data->all_multicast)
> > > + mode = IXGBEVF_XCAST_MODE_ALLMULTI;
> > > +
> > > + switch (hw->mac.ops.update_xcast_mode(hw, mode)) {
> > > case IXGBE_SUCCESS:
> > > ret = 0;
> > > break;
> > > @@ -7809,6 +7813,9 @@ ixgbevf_dev_allmulticast_enable(struct
> > > rte_eth_dev *dev)
> > > int ret;
> > > int mode = IXGBEVF_XCAST_MODE_ALLMULTI;
> > >
> > > + if (dev->data->promiscuous)
> > > + return 0;
> > > +
> > > switch (hw->mac.ops.update_xcast_mode(hw, mode)) {
> > > case IXGBE_SUCCESS:
> > > ret = 0;
> > > @@ -7830,6 +7837,9 @@ ixgbevf_dev_allmulticast_disable(struct
> > > rte_eth_dev *dev)
> > > struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data-
> > > >dev_private);
> > > int ret;
> > >
> > > + if (dev->data->promiscuous)
> > > + return 0;
> > > +
> >
> > It seems that we cannot actually turn off allmulticast mode when
> > promiscuous mode is enabled, so can we return error and add a log
> > message here as a reminder?
>
> I think we should not return an error here: when we disable all_multi, there
> are
> 2 cases:
>
> 1/ promiscuous is off: no issue here, we do as before, we ask the PF to
> disable
> the all_multi mode
>
> 2/ promiscuous is on: we have nothing to ask to the PF, because we still want
> to stay in promisc mode. We just need to remember that all_multi is
> disabled,
> and this is done already done by the ethdev layer.
>
> On the PF dpdk driver, the behavior is the same: we can enable or disable
> promisc and all_multi independently, and changing the all_multi value when
> promisc is enabled is allowed and does not impact the rx traffic.
>
>
> Thanks,
> Olivier
>
No more concern if the behavior is consistent.
> > Thanks,
> > Wenjun
> >
> > > switch (hw->mac.ops.update_xcast_mode(hw,
> > > IXGBEVF_XCAST_MODE_MULTI)) {
> > > case IXGBE_SUCCESS:
> > > ret = 0;
> > > --
> > > 2.30.2
> >
Acked-by: Wenjun Wu <wenjun1...@intel.com>
Thanks,
Wenjun
