Added LDPC enqueue functions to handle transport blocks.

Signed-off-by: Hernan Vargas <hernan.var...@intel.com>

Reviewed-by: Maxime Coquelin <maxime.coque...@redhat.com>
---
 drivers/baseband/acc/rte_acc100_pmd.c | 167 +++++++++++++++++++++++++-
 1 file changed, 164 insertions(+), 3 deletions(-)

diff --git a/drivers/baseband/acc/rte_acc100_pmd.c 
b/drivers/baseband/acc/rte_acc100_pmd.c
index 1ccbe4b8b7..1f671ac8f2 100644
--- a/drivers/baseband/acc/rte_acc100_pmd.c
+++ b/drivers/baseband/acc/rte_acc100_pmd.c
@@ -2152,6 +2152,56 @@ enqueue_ldpc_enc_n_op_cb(struct acc_queue *q, struct 
rte_bbdev_enc_op **ops,
        return num;
 }
 
+/* Enqueue one encode operations for ACC100 device for a partial TB
+ * all codes blocks have same configuration multiplexed on the same descriptor.
+ */
+static inline void
+enqueue_ldpc_enc_part_tb(struct acc_queue *q, struct rte_bbdev_enc_op *op,
+               uint16_t total_enqueued_descs, int16_t num_cbs, uint32_t e,
+               uint16_t in_len_bytes, uint32_t out_len_bytes, uint32_t 
*in_offset,
+               uint32_t *out_offset)
+{
+       union acc_dma_desc *desc = NULL;
+       struct rte_mbuf *output_head, *output;
+       int i, next_triplet;
+       struct rte_bbdev_op_ldpc_enc *enc = &op->ldpc_enc;
+       uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_descs) & 
q->sw_ring_wrap_mask);
+
+       desc = q->ring_addr + desc_idx;
+       acc_fcw_le_fill(op, &desc->req.fcw_le, num_cbs, e);
+
+       /* This could be done at polling. */
+       acc_header_init(&desc->req);
+       desc->req.numCBs = num_cbs;
+
+       desc->req.m2dlen = 1 + num_cbs;
+       desc->req.d2mlen = num_cbs;
+       next_triplet = 1;
+
+       for (i = 0; i < num_cbs; i++) {
+               desc->req.data_ptrs[next_triplet].address =
+                       rte_pktmbuf_iova_offset(enc->input.data, *in_offset);
+               *in_offset += in_len_bytes;
+               desc->req.data_ptrs[next_triplet].blen = in_len_bytes;
+               next_triplet++;
+               desc->req.data_ptrs[next_triplet].address =
+                       rte_pktmbuf_iova_offset(enc->output.data, *out_offset);
+               *out_offset += out_len_bytes;
+               desc->req.data_ptrs[next_triplet].blen = out_len_bytes;
+               next_triplet++;
+               enc->output.length += out_len_bytes;
+               output_head = output = enc->output.data;
+               mbuf_append(output_head, output, out_len_bytes);
+       }
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+       rte_memdump(stderr, "FCW", &desc->req.fcw_le,
+                       sizeof(desc->req.fcw_le) - 8);
+       rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc));
+#endif
+
+}
+
 /* Enqueue one encode operations for ACC100 device in CB mode */
 static inline int
 enqueue_ldpc_enc_one_op_cb(struct acc_queue *q, struct rte_bbdev_enc_op *op,
@@ -2296,6 +2346,76 @@ enqueue_enc_one_op_tb(struct acc_queue *q, struct 
rte_bbdev_enc_op *op,
        return current_enqueued_cbs;
 }
 
+/* Enqueue one encode operations for ACC100 device in TB mode.
+ * returns the number of descs used.
+ */
+static inline int
+enqueue_ldpc_enc_one_op_tb(struct acc_queue *q, struct rte_bbdev_enc_op *op,
+               uint16_t enq_descs, uint8_t cbs_in_tb)
+{
+#ifndef RTE_LIBRTE_BBDEV_SKIP_VALIDATE
+       if (validate_ldpc_enc_op(op, q) == -1) {
+               rte_bbdev_log(ERR, "LDPC encoder validation failed");
+               return -EINVAL;
+       }
+#endif
+       uint8_t num_a, num_b;
+       uint16_t desc_idx;
+       uint8_t r = op->ldpc_enc.tb_params.r;
+       uint8_t cab =  op->ldpc_enc.tb_params.cab;
+       union acc_dma_desc *desc;
+       uint16_t init_enq_descs = enq_descs;
+       uint16_t input_len_B = ((op->ldpc_enc.basegraph == 1 ? 22 : 10) *
+                       op->ldpc_enc.z_c - op->ldpc_enc.n_filler) >> 3;
+       uint32_t in_offset = 0, out_offset = 0;
+       uint16_t return_descs;
+
+       if (check_bit(op->ldpc_enc.op_flags, RTE_BBDEV_LDPC_CRC_24B_ATTACH))
+               input_len_B -= 3;
+
+       if (r < cab) {
+               num_a = cab - r;
+               num_b = cbs_in_tb - cab;
+       } else {
+               num_a = 0;
+               num_b = cbs_in_tb - r;
+       }
+
+       while (num_a > 0) {
+               uint32_t e = op->ldpc_enc.tb_params.ea;
+               uint32_t out_len_bytes = (e + 7) >> 3;
+               uint8_t enq = RTE_MIN(num_a, ACC_MUX_5GDL_DESC);
+               num_a -= enq;
+               enqueue_ldpc_enc_part_tb(q, op, enq_descs, enq, e, input_len_B,
+                               out_len_bytes, &in_offset, &out_offset);
+               enq_descs++;
+       }
+       while (num_b > 0) {
+               uint32_t e = op->ldpc_enc.tb_params.eb;
+               uint32_t out_len_bytes = (e + 7) >> 3;
+               uint8_t enq = RTE_MIN(num_b, ACC_MUX_5GDL_DESC);
+               num_b -= enq;
+               enqueue_ldpc_enc_part_tb(q, op, enq_descs, enq, e, input_len_B,
+                               out_len_bytes, &in_offset, &out_offset);
+               enq_descs++;
+       }
+
+       return_descs = enq_descs - init_enq_descs;
+       /* Keep total number of CBs in first TB. */
+       desc_idx = ((q->sw_ring_head + init_enq_descs) & q->sw_ring_wrap_mask);
+       desc = q->ring_addr + desc_idx;
+       desc->req.cbs_in_tb = return_descs; /** Actual number of descriptors. */
+       desc->req.op_addr = op;
+
+       /* Set SDone on last CB descriptor for TB mode. */
+       desc_idx = ((q->sw_ring_head + enq_descs - 1) & q->sw_ring_wrap_mask);
+       desc = q->ring_addr + desc_idx;
+       desc->req.sdone_enable = 1;
+       desc->req.irq_enable = q->irq_enable;
+       desc->req.op_addr = op;
+       return return_descs;
+}
+
 #ifndef RTE_LIBRTE_BBDEV_SKIP_VALIDATE
 /* Validates turbo decoder parameters */
 static inline int
@@ -2876,7 +2996,10 @@ enqueue_dec_one_op_tb(struct acc_queue *q, struct 
rte_bbdev_dec_op *op,
        uint16_t current_enqueued_cbs = 0;
 
 #ifndef RTE_LIBRTE_BBDEV_SKIP_VALIDATE
-       /* Validate op structure */
+       if (cbs_in_tb == 0) {
+               rte_bbdev_log(ERR, "Turbo decoder invalid number of CBs");
+               return -EINVAL;
+       }
        if (validate_dec_op(op, q) == -1) {
                rte_bbdev_log(ERR, "Turbo decoder validation rejected");
                return -EINVAL;
@@ -3102,7 +3225,45 @@ acc100_enqueue_enc_tb(struct rte_bbdev_queue_data 
*q_data,
        return i;
 }
 
-/* Check room in AQ for the enqueues batches into Qmgr */
+/* Enqueue LDPC encode operations for ACC100 device in TB mode. */
+static uint16_t
+acc100_enqueue_ldpc_enc_tb(struct rte_bbdev_queue_data *q_data,
+               struct rte_bbdev_enc_op **ops, uint16_t num)
+{
+       struct acc_queue *q = q_data->queue_private;
+       int32_t avail = acc_ring_avail_enq(q);
+       uint16_t i, enqueued_descs = 0;
+       uint8_t cbs_in_tb;
+       int descs_used;
+
+       for (i = 0; i < num; ++i) {
+               cbs_in_tb = get_num_cbs_in_tb_ldpc_enc(&ops[i]->ldpc_enc);
+               /* Check if there are available space for further processing. */
+               if (unlikely(avail - cbs_in_tb < 0)) {
+                       acc_enqueue_ring_full(q_data);
+                       break;
+               }
+               descs_used = enqueue_ldpc_enc_one_op_tb(q, ops[i], 
enqueued_descs, cbs_in_tb);
+               if (descs_used < 0) {
+                       acc_enqueue_invalid(q_data);
+                       break;
+               }
+               enqueued_descs += descs_used;
+               avail -= descs_used;
+       }
+       if (unlikely(enqueued_descs == 0))
+               return 0; /* Nothing to enqueue. */
+
+       acc_dma_enqueue(q, enqueued_descs, &q_data->queue_stats);
+
+       /* Update stats. */
+       q_data->queue_stats.enqueued_count += i;
+       q_data->queue_stats.enqueue_err_count += num - i;
+
+       return i;
+}
+
+/* Check room in AQ for the enqueues batches into Qmgr. */
 static int32_t
 acc100_aq_avail(struct rte_bbdev_queue_data *q_data, uint16_t num_ops)
 {
@@ -3139,7 +3300,7 @@ acc100_enqueue_ldpc_enc(struct rte_bbdev_queue_data 
*q_data,
        if (unlikely((aq_avail <= 0) || (num == 0)))
                return 0;
        if (ops[0]->ldpc_enc.code_block_mode == RTE_BBDEV_TRANSPORT_BLOCK)
-               return acc100_enqueue_enc_tb(q_data, ops, num);
+               return acc100_enqueue_ldpc_enc_tb(q_data, ops, num);
        else
                return acc100_enqueue_ldpc_enc_cb(q_data, ops, num);
 }
-- 
2.37.1

Reply via email to