On Thu, Sep 29, 2022 at 1:43 PM Amit Prakash Shukla
<amitpraka...@marvell.com> wrote:
> 4. /eal/element_list,<heap-id>,<memseg-list-id>,<memseg-id>
> The command outputs number of elements in a memseg based
> on the heap-id, memseg-list-id and memseg-id given as input.
> Example:
> --> /eal/element_list,0,0,63
> {"/eal/element_list": {"Element_count": 52}}
>
> --> /eal/element_list,0,1,15
> {"/eal/element_list": {"Element_count": 52}}
>
> 5. /eal/element_info,<heap-id>,<memseg-list-id>,<memseg-id>, \
> <elem-start-id>,<elem-end-id>
> The command outputs element information like element start
> address, end address, to which memseg it belongs, element
> state, element size. User can give a range of elements to be
> printed.
> Example:
> --> /eal/element_info,0,1,15,1,2
> {"/eal/element_info": {"element.1": {"msl_id": 1, \
> "ms_id": 15, "memseg_start_addr": "0xb20000000", \
> "memseg_end_addr": "0xb40000000", \
> "element_start_addr": "0xb201fe680", \
> "element_end_addr": "0xb20bfe700", \
> "element_size": 10485888, "element_state": "Busy"}, \
> "element.2": {"msl_id": 1, "ms_id": 15, \
> "memseg_start_addr": "0xb20000000", \
> "memseg_end_addr": "0xb40000000", \
> "element_start_addr": "0xb20bfe700", \
> "element_end_addr": "0xb215fe780", "element_size": 10485888, \
> "element_state": "Busy"}, "Element_count": 2}}
>
element is too generic.
Just look at the command name: /eal/element_XXX.
What is an EAL element?
--
David Marchand
