This patch adds a capability to place hairpin Rx queue in locked device
memory. This capability is equivalent to storing hairpin RQ's data
buffers in locked internal device memory.
Hairpin Rx queue creation is extended with requesting that RQ is
allocated in locked internal device memory. If allocation fails and
force_memory hairpin configuration is set, then hairpin queue creation
(and, as a result, device start) fails. If force_memory is unset, then
PMD will fallback to allocating memory for hairpin RQ in unlocked
internal device memory.
To allow such allocation, the user must set HAIRPIN_DATA_BUFFER_LOCK
flag in FW using mlxconfig tool.
Signed-off-by: Dariusz Sosnowski <dsosnow...@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viachesl...@nvidia.com>
---
doc/guides/platform/mlx5.rst | 5 ++++
drivers/net/mlx5/mlx5_devx.c | 51 ++++++++++++++++++++++++++++------
drivers/net/mlx5/mlx5_ethdev.c | 2 ++
3 files changed, 49 insertions(+), 9 deletions(-)
diff --git a/doc/guides/platform/mlx5.rst b/doc/guides/platform/mlx5.rst
index 46b394c4ee..3cc1dd29e2 100644
--- a/doc/guides/platform/mlx5.rst
+++ b/doc/guides/platform/mlx5.rst
@@ -555,6 +555,11 @@ Below are some firmware configurations listed.
REAL_TIME_CLOCK_ENABLE=1
+- allow locking hairpin RQ data buffer in device memory::
+
+ HAIRPIN_DATA_BUFFER_LOCK=1
+ MEMIC_SIZE_LIMIT=0
+
.. _mlx5_common_driver_options:
diff --git a/drivers/net/mlx5/mlx5_devx.c b/drivers/net/mlx5/mlx5_devx.c
index c61c34bd99..fe303a73bb 100644
--- a/drivers/net/mlx5/mlx5_devx.c
+++ b/drivers/net/mlx5/mlx5_devx.c
@@ -468,14 +468,16 @@ mlx5_rxq_obj_hairpin_new(struct mlx5_rxq_priv *rxq)
{
uint16_t idx = rxq->idx;
struct mlx5_priv *priv = rxq->priv;
+ struct mlx5_hca_attr *hca_attr __rte_unused =
&priv->sh->cdev->config.hca_attr;
struct mlx5_rxq_ctrl *rxq_ctrl = rxq->ctrl;
- struct mlx5_devx_create_rq_attr attr = { 0 };
+ struct mlx5_devx_create_rq_attr unlocked_attr = { 0 };
+ struct mlx5_devx_create_rq_attr locked_attr = { 0 };
struct mlx5_rxq_obj *tmpl = rxq_ctrl->obj;
uint32_t max_wq_data;
MLX5_ASSERT(rxq != NULL && rxq->ctrl != NULL && tmpl != NULL);
tmpl->rxq_ctrl = rxq_ctrl;
- attr.hairpin = 1;
+ unlocked_attr.hairpin = 1;
max_wq_data =
priv->sh->cdev->config.hca_attr.log_max_hairpin_wq_data_sz;
/* Jumbo frames > 9KB should be supported, and more packets. */
@@ -487,20 +489,50 @@ mlx5_rxq_obj_hairpin_new(struct mlx5_rxq_priv *rxq)
rte_errno = ERANGE;
return -rte_errno;
}
- attr.wq_attr.log_hairpin_data_sz = priv->config.log_hp_size;
+ unlocked_attr.wq_attr.log_hairpin_data_sz =
priv->config.log_hp_size;
} else {
- attr.wq_attr.log_hairpin_data_sz =
+ unlocked_attr.wq_attr.log_hairpin_data_sz =
(max_wq_data < MLX5_HAIRPIN_JUMBO_LOG_SIZE) ?
max_wq_data : MLX5_HAIRPIN_JUMBO_LOG_SIZE;
}
/* Set the packets number to the maximum value for performance. */
- attr.wq_attr.log_hairpin_num_packets =
- attr.wq_attr.log_hairpin_data_sz -
+ unlocked_attr.wq_attr.log_hairpin_num_packets =
+ unlocked_attr.wq_attr.log_hairpin_data_sz -
MLX5_HAIRPIN_QUEUE_STRIDE;
- attr.counter_set_id = priv->counter_set_id;
+ unlocked_attr.counter_set_id = priv->counter_set_id;
rxq_ctrl->rxq.delay_drop = priv->config.hp_delay_drop;
- attr.delay_drop_en = priv->config.hp_delay_drop;
- tmpl->rq = mlx5_devx_cmd_create_rq(priv->sh->cdev->ctx, &attr,
+ unlocked_attr.delay_drop_en = priv->config.hp_delay_drop;
+ unlocked_attr.hairpin_data_buffer_type =
+
MLX5_RQC_HAIRPIN_DATA_BUFFER_TYPE_UNLOCKED_INTERNAL_BUFFER;
+ if (rxq->hairpin_conf.use_locked_device_memory) {
+ /*
+ * It is assumed that configuration is verified against
capabilities
+ * during queue setup.
+ */
+ MLX5_ASSERT(hca_attr->hairpin_data_buffer_locked);
+ rte_memcpy(&locked_attr, &unlocked_attr, sizeof(locked_attr));
+ locked_attr.hairpin_data_buffer_type =
+
MLX5_RQC_HAIRPIN_DATA_BUFFER_TYPE_LOCKED_INTERNAL_BUFFER;
+ tmpl->rq = mlx5_devx_cmd_create_rq(priv->sh->cdev->ctx,
&locked_attr,
+ rxq_ctrl->socket);
+ if (!tmpl->rq && rxq->hairpin_conf.force_memory) {
+ DRV_LOG(ERR, "Port %u Rx hairpin queue %u can't create
RQ object"
+ " with locked memory buffer",
+ priv->dev_data->port_id, idx);
+ return -rte_errno;
+ } else if (!tmpl->rq && !rxq->hairpin_conf.force_memory) {
+ DRV_LOG(WARNING, "Port %u Rx hairpin queue %u can't
create RQ object"
+ " with locked memory buffer. Falling
back to unlocked"
+ " device memory.",
+ priv->dev_data->port_id, idx);
+ rte_errno = 0;
+ goto create_rq_unlocked;
+ }
+ goto create_rq_set_state;
+ }
+
+create_rq_unlocked:
+ tmpl->rq = mlx5_devx_cmd_create_rq(priv->sh->cdev->ctx, &unlocked_attr,
rxq_ctrl->socket);
if (!tmpl->rq) {
DRV_LOG(ERR,
@@ -509,6 +541,7 @@ mlx5_rxq_obj_hairpin_new(struct mlx5_rxq_priv *rxq)
rte_errno = errno;
return -rte_errno;
}
+create_rq_set_state:
priv->dev_data->rx_queue_state[idx] = RTE_ETH_QUEUE_STATE_HAIRPIN;
return 0;
}
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index c59005ea2b..4a85415ff3 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -740,6 +740,8 @@ mlx5_hairpin_cap_get(struct rte_eth_dev *dev, struct
rte_eth_hairpin_cap *cap)
cap->max_tx_2_rx = 1;
cap->max_nb_desc = 8192;
hca_attr = &priv->sh->cdev->config.hca_attr;
+ cap->rx_cap.locked_device_memory = hca_attr->hairpin_data_buffer_locked;
+ cap->rx_cap.rte_memory = 0;
cap->tx_cap.locked_device_memory = 0;
cap->tx_cap.rte_memory = hca_attr->hairpin_sq_wq_in_host_mem;
return 0;
--
2.25.1
