Add a new ethdev API to retrieve supported protocol headers
of a PMD, which helps to configure protocol header based buffer split.
Signed-off-by: Yuan Wang <yuanx.w...@intel.com>
Signed-off-by: Xuan Ding <xuan.d...@intel.com>
Signed-off-by: Wenxuan Wu <wenxuanx...@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybche...@oktetlabs.ru>
---
doc/guides/rel_notes/release_22_11.rst | 5 ++++
lib/ethdev/ethdev_driver.h | 15 ++++++++++++
lib/ethdev/rte_ethdev.c | 33 ++++++++++++++++++++++++++
lib/ethdev/rte_ethdev.h | 30 +++++++++++++++++++++++
lib/ethdev/version.map | 3 +++
5 files changed, 86 insertions(+)
diff --git a/doc/guides/rel_notes/release_22_11.rst
b/doc/guides/rel_notes/release_22_11.rst
index 0231959874..6a7474a3d6 100644
--- a/doc/guides/rel_notes/release_22_11.rst
+++ b/doc/guides/rel_notes/release_22_11.rst
@@ -96,6 +96,11 @@ New Features
* Added ``rte_event_eth_tx_adapter_queue_stop`` to stop the Tx Adapter
from enqueueing any packets to the Tx queue.
+* **Added new ethdev API for PMD to get buffer split supported protocol
types.**
+
+ * Added ``rte_eth_buffer_split_get_supported_hdr_ptypes()``, to get supported
+ header protocols of a PMD to split.
+
Removed Items
-------------
diff --git a/lib/ethdev/ethdev_driver.h b/lib/ethdev/ethdev_driver.h
index 8cd8eb8685..791b264610 100644
--- a/lib/ethdev/ethdev_driver.h
+++ b/lib/ethdev/ethdev_driver.h
@@ -1055,6 +1055,18 @@ typedef int (*eth_ip_reassembly_conf_get_t)(struct
rte_eth_dev *dev,
typedef int (*eth_ip_reassembly_conf_set_t)(struct rte_eth_dev *dev,
const struct rte_eth_ip_reassembly_params *conf);
+/**
+ * @internal
+ * Get supported header protocols of a PMD to split.
+ *
+ * @param dev
+ * Ethdev handle of port.
+ *
+ * @return
+ * An array pointer to store supported protocol headers.
+ */
+typedef const uint32_t *(*eth_buffer_split_supported_hdr_ptypes_get_t)(struct
rte_eth_dev *dev);
+
/**
* @internal
* Dump private info from device to a file.
@@ -1302,6 +1314,9 @@ struct eth_dev_ops {
/** Set IP reassembly configuration */
eth_ip_reassembly_conf_set_t ip_reassembly_conf_set;
+ /** Get supported header ptypes to split */
+ eth_buffer_split_supported_hdr_ptypes_get_t
buffer_split_supported_hdr_ptypes_get;
+
/** Dump private info from device */
eth_dev_priv_dump_t eth_dev_priv_dump;
diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
index 0c2c1088c0..1f0a7f8f3f 100644
--- a/lib/ethdev/rte_ethdev.c
+++ b/lib/ethdev/rte_ethdev.c
@@ -6002,6 +6002,39 @@ rte_eth_dev_priv_dump(uint16_t port_id, FILE *file)
return eth_err(port_id, (*dev->dev_ops->eth_dev_priv_dump)(dev, file));
}
+int
+rte_eth_buffer_split_get_supported_hdr_ptypes(uint16_t port_id, uint32_t
*ptypes, int num)
+{
+ int i, j;
+ struct rte_eth_dev *dev;
+ const uint32_t *all_types;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+
+ if (ptypes == NULL && num > 0) {
+ RTE_ETHDEV_LOG(ERR,
+ "Cannot get ethdev port %u supported header protocol
types to NULL when array size is non zero\n",
+ port_id);
+ return -EINVAL;
+ }
+
+ if (*dev->dev_ops->buffer_split_supported_hdr_ptypes_get == NULL)
+ return -ENOTSUP;
+ all_types = (*dev->dev_ops->buffer_split_supported_hdr_ptypes_get)(dev);
+
+ if (!all_types)
+ return 0;
+
+ for (i = 0, j = 0; all_types[i] != RTE_PTYPE_UNKNOWN; ++i) {
+ if (j < num)
+ ptypes[j] = all_types[i];
+ j++;
+ }
+
+ return j;
+}
+
RTE_LOG_REGISTER_DEFAULT(rte_eth_dev_logtype, INFO);
RTE_INIT(ethdev_init_telemetry)
diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
index 12535c703e..cf14e04010 100644
--- a/lib/ethdev/rte_ethdev.h
+++ b/lib/ethdev/rte_ethdev.h
@@ -6017,6 +6017,36 @@ rte_eth_tx_buffer(uint16_t port_id, uint16_t queue_id,
return rte_eth_tx_buffer_flush(port_id, queue_id, buffer);
}
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Get supported header protocols to split on Rx.
+ *
+ * When a packet type is announced to be split, it *must* be supported by
+ * the PMD. For instance, if eth-ipv4, eth-ipv4-udp is announced, the PMD must
+ * return the following packet types for these packets:
+ * - Ether/IPv4 -> RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4
+ * - Ether/IPv4/UDP -> RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4 |
RTE_PTYPE_L4_UDP
+ *
+ * @param port_id
+ * The port identifier of the device.
+ * @param[out] ptypes
+ * An array pointer to store supported protocol headers, allocated by caller.
+ * These ptypes are composed with RTE_PTYPE_*.
+ * @param num
+ * Size of the array pointed by param ptypes.
+ * @return
+ * - (>=0) Number of supported ptypes. If the number of types exceeds num,
+ * only num entries will be filled into the ptypes array, but the
full
+ * count of supported ptypes will be returned.
+ * - (-ENOTSUP) if header protocol is not supported by device.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+__rte_experimental
+int rte_eth_buffer_split_get_supported_hdr_ptypes(uint16_t port_id, uint32_t
*ptypes, int num);
+
#ifdef __cplusplus
}
#endif
diff --git a/lib/ethdev/version.map b/lib/ethdev/version.map
index 25e54f9d3e..50f5814a48 100644
--- a/lib/ethdev/version.map
+++ b/lib/ethdev/version.map
@@ -285,6 +285,9 @@ EXPERIMENTAL {
rte_mtr_color_in_protocol_priority_get;
rte_mtr_color_in_protocol_set;
rte_mtr_meter_vlan_table_update;
+
+ # added in 22.11
+ rte_eth_buffer_split_get_supported_hdr_ptypes;
};
INTERNAL {
--
2.25.1
