Added more people involved in the dpdk mem allocator, and telemetry.
On Wed, May 25, 2022 at 12:34 PM Amit Prakash Shukla
<amitpraka...@marvell.com> wrote:
>
> Changes adds telemetry support to display memory occupancy
> in memseg and the information of the elements allocated from
> a memseg based on arguments provided by user. This patch
> adds following endpoints:
>
> 1. /eal/memseg_list_array
> The command displays the memseg list from which the memory
> has been allocated.
> Example:
> --> /eal/memseg_list_array
> {"/eal/memseg_list_array": [0, 1]}
>
> 2. /eal/memseg_list_info,<memseg-list-id>
> The command outputs the memsegs, from which the memory is
> allocated, for the memseg_list given as input. Command also
> supports help.
> Example:
> --> /eal/memseg_list_info,help
> {"/eal/memseg_list_info": "/eal/memseg_list_info,<memseg-list-id>"}
We already have something using the top level /help command.
This proposed addition does not add much info.
--> /help,/eal/memseg_list_info
{"/help": {"/eal/memseg_list_info": "Returns memseg list. Parameters:
int memseg_list_id"}}
--> /eal/memseg_list_info,help
{"/eal/memseg_list_info": "/eal/memseg_list_info,<memseg-list-id>"}
Please, remove it.
I think this series is useful though I did not enter into detail.
If nobody has objection, I will merge it once the above comment is handled.
>
> --> /eal/memseg_list_info,1
> {"/eal/memseg_list_info": [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, \
> 12, 13, 14, 15]}
>
> 3. /eal/memseg_info,<memseg-list-id>,<memseg-id>
> The command outputs the memseg information based on the
> memseg-list and the memseg-id given as input. Command also
> supports help.
> Example:
> --> /eal/memseg_info,help
> {"/eal/memseg_info": "/eal/memseg_info,<memseg-list-id>, \
> <memseg-id>"}
>
> --> /eal/memseg_info,0,10
> {"/eal/memseg_info": {"Memseg_list_index": 0, \
> "Memseg_index": 10, "Memseg_list_len": 64, \
> "Start_addr": "0x260000000", "End_addr": "0x280000000", \
> "Size": 536870912}}
>
> --> /eal/memseg_info,1,15
> {"/eal/memseg_info": {"Memseg_list_index": 1, \
> "Memseg_index": 15, "Memseg_list_len": 64, \
> "Start_addr": "0xb20000000", "End_addr": "0xb40000000", \
> "Size": 536870912}}
>
> 4. /eal/element_list,<heap-id>,<memseg-list-id>,<memseg-id>
> The command outputs number of elements in a memseg based
> on the heap-id, memseg-list-id and memseg-id given as input.
> Command also supports help.
> Example:
> --> /eal/element_list,help
> {"/eal/element_list": "/eal/element_list,<heap-id>, \
> <memseg-list-id>,<memseg-id>"}
>
> --> /eal/element_list,0,0,63
> {"/eal/element_list": {"Element_count": 52}}
>
> --> /eal/element_list,0,1,15
> {"/eal/element_list": {"Element_count": 52}}
>
> 5. /eal/element_info,<heap-id>,<memseg-list-id>,<memseg-id>, \
> <elem-start-id>,<elem-end-id>
> The command outputs element information like element start
> address, end address, to which memseg it belongs, element
> state, element size. User can give a range of elements to be
> printed. Command also supports help.
> Example:
> --> /eal/element_info,help
> {"/eal/element_info": "/eal/element_info,<heap-id>, \
> <memseg-list-id>,<memseg-id>,<elem-start-id>,<elem-end-id>"}
>
> --> /eal/element_info,0,1,15,1,2
> {"/eal/element_info": {"element.1": {"msl_id": 1, \
> "ms_id": 15, "memseg_start_addr": "0xb20000000", \
> "memseg_end_addr": "0xb40000000", \
> "element_start_addr": "0xb201fe680", \
> "element_end_addr": "0xb20bfe700", \
> "element_size": 10485888, "element_state": "Busy"}, \
> "element.2": {"msl_id": 1, "ms_id": 15, \
> "memseg_start_addr": "0xb20000000", \
> "memseg_end_addr": "0xb40000000", \
> "element_start_addr": "0xb20bfe700", \
> "element_end_addr": "0xb215fe780", "element_size": 10485888, \
> "element_state": "Busy"}, "Element_count": 2}}
>
> Signed-off-by: Amit Prakash Shukla <amitpraka...@marvell.com>
--
David Marchand
