[dpdk-dev] [PATCH 2/2] app/testpmd: compute checksum in icmpecho replies

[Olivier MATZ]

Hi Adrien,

On 05/22/2015 01:07 PM, Adrien Mazarguil wrote:
> ICMP echo replies with invalid checksums may be dropped by network nodes or
> ignored by the ping utility.
> 
> Signed-off-by: Adrien Mazarguil <adrien.mazarguil at 6wind.com>
> Acked-by: Ivan Boule <ivan.boule at 6wind.com>
> ---
>  app/test-pmd/icmpecho.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/app/test-pmd/icmpecho.c b/app/test-pmd/icmpecho.c
> index c5933f4..c278baf 100644
> --- a/app/test-pmd/icmpecho.c
> +++ b/app/test-pmd/icmpecho.c
> @@ -445,7 +445,8 @@ reply_to_icmp_echo_rqsts(struct fwd_stream *fs)
>                * - switch IPv4 source and destinations addresses,
>                * - set IP_ICMP_ECHO_REPLY in ICMP header.
>                * No need to re-compute the IP header checksum.
> -              * Reset ICMP checksum.
> +              * ICMP checksum is computed by assuming it is valid in the
> +              * echo request and not verified.
>                */
>               ether_addr_copy(&eth_h->s_addr, &eth_addr);
>               ether_addr_copy(&eth_h->d_addr, &eth_h->s_addr);
> @@ -454,7 +455,7 @@ reply_to_icmp_echo_rqsts(struct fwd_stream *fs)
>               ip_h->src_addr = ip_h->dst_addr;
>               ip_h->dst_addr = ip_addr;
>               icmp_h->icmp_type = IP_ICMP_ECHO_REPLY;
> -             icmp_h->icmp_cksum = 0;
> +             icmp_h->icmp_cksum += htons(IP_ICMP_ECHO_REQUEST << 8);


I don't think this checksum calculation method is always correct.

Example of a working case:

>>> p=Ether(str(Ether()/IP()/ICMP(seq=0)))
>>> p
<Ether  dst=ff:ff:ff:ff:ff:ff src=00:00:00:00:00:00 type=0x800 |<IP
version=4L ihl=5L tos=0x0 len=28 id=1 flags= frag=0L ttl=64 proto=icmp
chksum=0x7cde src=127.0.0.1 dst=127.0.0.1 options=[] |<ICMP
type=echo-request code=0 chksum=0xf7ff id=0x0 seq=0x0 |>>>
>>> del(p[ICMP].chksum)
>>> p[ICMP].type = 0
>>> p=Ether(str(p))
>>> p
<Ether  dst=ff:ff:ff:ff:ff:ff src=00:00:00:00:00:00 type=0x800 |<IP
version=4L ihl=5L tos=0x0 len=28 id=1 flags= frag=0L ttl=64 proto=icmp
chksum=0x7cde src=127.0.0.1 dst=127.0.0.1 options=[] |<ICMP
type=echo-reply code=0 chksum=0xffff id=0x0 seq=0x0 |>>>

We have 0xffff - 0xf7ff = 0x0800


Example of a non-working case:

>>> p=Ether(str(Ether()/IP()/ICMP(seq=0xf800)))
>>> p
<Ether  dst=ff:ff:ff:ff:ff:ff src=00:00:00:00:00:00 type=0x800 |<IP
version=4L ihl=5L tos=0x0 len=28 id=1 flags= frag=0L ttl=64 proto=icmp
chksum=0x7cde src=127.0.0.1 dst=127.0.0.1 options=[] |<ICMP
type=echo-request code=0 chksum=0xfffe id=0x0 seq=0xf800 |>>>
>>> del(p[ICMP].chksum)
>>> p[ICMP].type = 0
>>> p=Ether(str(p))
>>> p
<Ether  dst=ff:ff:ff:ff:ff:ff src=00:00:00:00:00:00 type=0x800 |<IP
version=4L ihl=5L tos=0x0 len=28 id=1 flags= frag=0L ttl=64 proto=icmp
chksum=0x7cde src=127.0.0.1 dst=127.0.0.1 options=[] |<ICMP
type=echo-reply code=0 chksum=0x7ff id=0x0 seq=0xf800 |>>>

Here, 0x7ff - 0xfffe != 0x08000


A correct solution (not tested) would be something like:

        uint32_t cksum;
        cksum = (~(icmp_h->icmp_cksum)) & 0xffff;
        cksum += (~htons(IP_ICMP_ECHO_REQUEST << 8)) & 0xffff;
        cksum += (htons(IP_ICMP_ECHO_REPLY << 8)) & 0xffff;
        cksum = (cksum & 0xffff) + (cksum >> 16);
        cksum = (cksum & 0xffff) + (cksum >> 16);
        icmp_h->icmp_cksum = (~cksum) & 0xffff;

Regards,
Olivier


>               pkts_burst[nb_replies++] = pkt;
>       }
>  
>