https://bugs.dpdk.org/show_bug.cgi?id=1057
Bug ID: 1057
Summary: Unable to use flow rules on VF
Product: DPDK
Version: 21.11
Hardware: x86
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: Normal
Component: ethdev
Assignee: dev@dpdk.org
Reporter: hrvoje.habja...@zg.ht.hr
Target Milestone: ---
Created attachment 214
--> https://bugs.dpdk.org/attachment.cgi?id=214&action=edit
rte_config file
Hi.
I'm trying to use rte_flow API to do some packet steering to different queues,
but to no avail.
Important note here is that i'm working with VF (SR-IOV) inside VM. VM is
Ubuntu 20.04.
DPDK used is 21.11.1 (statically compiled). Tests are done with testpmd
application.
I did test the same rule with following DPDK drivers:
ixgbevf - NOT WORKING (x520)
mlx5 - WORKING
iavf - NOT WORKING (xxv710, xl710, e810).
Cards used are:
xx:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+
Network Connection (rev 01)
Subsystem: Intel Corporation Ethernet Server Adapter X520-2
xx:00.0 Ethernet controller: Intel Corporation Ethernet Controller XXV710 for
25GbE SFP28 (rev 02)
Subsystem: Hewlett Packard Enterprise Ethernet 10/25/Gb 2-port 661SFP28
Adapter
xx:00.0 Ethernet controller: Intel Corporation Ethernet Controller XL710 for
40GbE QSFP+ (rev 02)
Subsystem: Intel Corporation Ethernet Converged Network Adapter
XL710-Q2
xx:00.0 Ethernet controller: Intel Corporation Ethernet Controller E810-C for
QSFP (rev 02)
Subsystem: Intel Corporation Ethernet Network Adapter E810-C-Q2
Cards behave the same in different servers, but i did try it on sandybridge,
skylake and cascadelake architecture.
Drivers used (and versions):
ixgbe-5.12.5
ixgbevf-4.12.4
i40e-2.18.9
ice-1.7.16
iavf-4.2.7
Drivers versions are the same in host and guest (VM).
Main question here is - do those cards support rte_flow API applied over VF
port? If they do, what is wrong here? If needed i can provide more details.
Here is an example:
# /tmp/dpdk-testpmd -c 0xf -n 4 -a 00:05.0 -- -i --rxq=4 --txq=4
EAL: Detected CPU lcores: 4
EAL: Detected NUMA nodes: 1
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: No available 1048576 kB hugepages reported
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Probe PCI driver: net_iavf (8086:154c) device: 0000:00:05.0 (socket 0)
TELEMETRY: No legacy callbacks, legacy socket not created
Interactive-mode selected
testpmd: create a new mbuf pool <mb_pool_0>: n=171456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Warning! port-topology=paired and odd forward ports number, the last port will
pair with itself.
Configuring Port 0 (socket 0)
iavf_configure_queues(): RXDID[22] is not supported, request default RXDID[1]
in Queue[0]
iavf_configure_queues(): RXDID[22] is not supported, request default RXDID[1]
in Queue[1]
iavf_configure_queues(): RXDID[22] is not supported, request default RXDID[1]
in Queue[2]
iavf_configure_queues(): RXDID[22] is not supported, request default RXDID[1]
in Queue[3]
Port 0: link state change event
Port 0: link state change event
Port 0: link state change event
Port 0: link state change event
Port 0: link state change event
Port 0: link state change event
Port 0: link state change event
Port 0: link state change event
Port 0: 26:03:E7:02:8C:AB
Checking link statuses...
Done
testpmd> show port info all
********************* Infos for port 0 *********************
MAC address: 26:03:E7:02:8C:AB
Device name: 00:05.0
Driver name: net_iavf
Firmware-version: not available
Devargs:
Connect to socket: 0
memory allocation on the socket: 0
Link status: up
Link speed: 25 Gbps
Link duplex: full-duplex
Autoneg status: On
MTU: 1500
Promiscuous mode: enabled
Allmulticast mode: disabled
Maximum number of MAC addresses: 64
Maximum number of MAC addresses of hash filtering: 0
VLAN offload:
strip off, filter off, extend off, qinq strip off
Hash key size in bytes: 52
Redirection table size: 64
Supported RSS offload flow types:
ipv4
ipv4-frag
ipv4-tcp
ipv4-udp
ipv4-sctp
ipv4-other
ipv6
ipv6-frag
ipv6-tcp
ipv6-udp
ipv6-sctp
ipv6-other
Minimum size of RX buffer: 1024
Maximum configurable length of RX packet: 9728
Maximum configurable size of LRO aggregated packet: 0
Current number of RX queues: 4
Max possible RX queues: 256
Max possible number of RXDs per queue: 4096
Min possible number of RXDs per queue: 64
RXDs number alignment: 32
Current number of TX queues: 4
Max possible TX queues: 256
Max possible number of TXDs per queue: 4096
Min possible number of TXDs per queue: 64
TXDs number alignment: 32
Max segment number per packet: 0
Max segment number per MTU/TSO: 0
Device capabilities: 0x0( )
testpmd> flow create 0 ingress pattern ipv4 dst is 192.168.0.5 / end actions
queue index 1 / end
iavf_flow_create(): Failed to create flow
port_flow_complain(): Caught PMD error type 2 (flow rule (handle)): Failed to
create parser engine.: Invalid argument
testpmd>
Attached is rte_config.h.
H.
--
You are receiving this mail because:
You are the assignee for the bug.
