This set patches add support for a new type of NFP nic NFP3800 and
the firmware with NFDk.
Signed-off-by: Jin Liu <jin....@corigine.com>
Signed-off-by: Chaoyong He <chaoyong...@corigine.com>
Signed-off-by: Niklas Söderlund <niklas.soderl...@corigine.com>
---
doc/guides/nics/nfp.rst | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/doc/guides/nics/nfp.rst b/doc/guides/nics/nfp.rst
index 30cdc69202..2d2b6d283a 100644
--- a/doc/guides/nics/nfp.rst
+++ b/doc/guides/nics/nfp.rst
@@ -12,7 +12,8 @@ up to 400-Gb/s.
This document explains how to use DPDK with the Netronome Poll Mode
Driver (PMD) supporting Netronome's Network Flow Processor 6xxx
-(NFP-6xxx) and Netronome's Flow Processor 4xxx (NFP-4xxx).
+(NFP-6xxx) and Netronome's Flow Processor 4xxx (NFP-4xxx) or
+Netronome's Flow Processor 38xx (NFP-38xx).
NFP is a SRIOV capable device and the PMD supports the physical
function (PF) and the virtual functions (VFs).
@@ -99,9 +100,10 @@ more than one SmartNIC, same type of SmartNIC or different
ones, and to upload a
different firmware to each SmartNIC.
.. Note::
- Currently the NFP PMD supports using the PF with Agilio Basic Firmware.
See
- https://help.netronome.com/support/solutions for more information on the
- various firmwares supported by the Netronome Agilio CX smartNIC.
+ Currently the NFP PMD supports using the PF with Agilio Firmware with
NFD3
+ and Agilio Firmware with NFDk. See
https://help.netronome.com/support/solutions
+ for more information on the various firmwares supported by the Netronome
+ Agilio CX smartNIC.
PF multiport support
--------------------
--
2.27.0
