On 5/25/22 06:14, Robin Zhang wrote:
This patch implements format module EEPROM information for
SFF-8472 Rev 12.0
Signed-off-by: Robin Zhang <robinx.zh...@intel.com>
[snip]
diff --git a/lib/ethdev/sff_8472.c b/lib/ethdev/sff_8472.c
new file mode 100644
index 0000000000..98e31e9262
--- /dev/null
+++ b/lib/ethdev/sff_8472.c
@@ -0,0 +1,286 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Intel Corporation
+ *
+ * Implements SFF-8472 optics diagnostics.
+ *
+ */
+
+#include <stdio.h>
+#include <math.h>
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+#include <rte_flow.h>
+#include "sff_common.h"
+#include "ethdev_sff_telemetry.h"
Please, fix includes in accordance with previous patches
review notes.
+
+/* Offsets in decimal, for direct comparison with the SFF specs */
+
+/* A0-based EEPROM offsets for DOM support checks */
+#define SFF_A0_DOM 92
+#define SFF_A0_OPTIONS 93
+#define SFF_A0_COMP 94
+
+/* EEPROM bit values for various registers */
+#define SFF_A0_DOM_EXTCAL (1 << 4)
+#define SFF_A0_DOM_INTCAL (1 << 5)
+#define SFF_A0_DOM_IMPL (1 << 6)
+#define SFF_A0_DOM_PWRT (1 << 3)
+
+#define SFF_A0_OPTIONS_AW (1 << 7)
RTE_BIT32 ?
+
+/*
+ * This is the offset at which the A2 page is in the EEPROM
+ * blob returned by the kernel.
+ */
+#define SFF_A2_BASE 0x100
+
+/* A2-based offsets for DOM */
+#define SFF_A2_TEMP 96
+#define SFF_A2_TEMP_HALRM 0
+#define SFF_A2_TEMP_LALRM 2
+#define SFF_A2_TEMP_HWARN 4
+#define SFF_A2_TEMP_LWARN 6
+
+#define SFF_A2_VCC 98
+#define SFF_A2_VCC_HALRM 8
+#define SFF_A2_VCC_LALRM 10
+#define SFF_A2_VCC_HWARN 12
+#define SFF_A2_VCC_LWARN 14
+
+#define SFF_A2_BIAS 100
+#define SFF_A2_BIAS_HALRM 16
+#define SFF_A2_BIAS_LALRM 18
+#define SFF_A2_BIAS_HWARN 20
+#define SFF_A2_BIAS_LWARN 22
+
+#define SFF_A2_TX_PWR 102
+#define SFF_A2_TX_PWR_HALRM 24
+#define SFF_A2_TX_PWR_LALRM 26
+#define SFF_A2_TX_PWR_HWARN 28
+#define SFF_A2_TX_PWR_LWARN 30
+
+#define SFF_A2_RX_PWR 104
+#define SFF_A2_RX_PWR_HALRM 32
+#define SFF_A2_RX_PWR_LALRM 34
+#define SFF_A2_RX_PWR_HWARN 36
+#define SFF_A2_RX_PWR_LWARN 38
+
+#define SFF_A2_ALRM_FLG 112
+#define SFF_A2_WARN_FLG 116
+
+/* 32-bit little-endian calibration constants */
+#define SFF_A2_CAL_RXPWR4 56
+#define SFF_A2_CAL_RXPWR3 60
+#define SFF_A2_CAL_RXPWR2 64
+#define SFF_A2_CAL_RXPWR1 68
+#define SFF_A2_CAL_RXPWR0 72
+
+/* 16-bit little endian calibration constants */
+#define SFF_A2_CAL_TXI_SLP 76
+#define SFF_A2_CAL_TXI_OFF 78
+#define SFF_A2_CAL_TXPWR_SLP 80
+#define SFF_A2_CAL_TXPWR_OFF 82
+#define SFF_A2_CAL_T_SLP 84
+#define SFF_A2_CAL_T_OFF 86
+#define SFF_A2_CAL_V_SLP 88
+#define SFF_A2_CAL_V_OFF 90
+
+static struct sff_8472_aw_flags {
+ const char *str; /* Human-readable string, null at the end */
+ int offset; /* A2-relative address offset */
+ uint8_t value; /* Alarm is on if (offset & value) != 0. */
+} sff_8472_aw_flags[] = {
+ { "Laser bias current high alarm", SFF_A2_ALRM_FLG, (1 << 3) },
RTE_BIT32 here and below?
+ { "Laser bias current low alarm", SFF_A2_ALRM_FLG, (1 << 2) },
+ { "Laser bias current high warning", SFF_A2_WARN_FLG, (1 << 3) },
+ { "Laser bias current low warning", SFF_A2_WARN_FLG, (1 << 2) },
+
+ { "Laser output power high alarm", SFF_A2_ALRM_FLG, (1 << 1) },
+ { "Laser output power low alarm", SFF_A2_ALRM_FLG, (1 << 0) },
+ { "Laser output power high warning", SFF_A2_WARN_FLG, (1 << 1) },
+ { "Laser output power low warning", SFF_A2_WARN_FLG, (1 << 0) },
+
+ { "Module temperature high alarm", SFF_A2_ALRM_FLG, (1 << 7) },
+ { "Module temperature low alarm", SFF_A2_ALRM_FLG, (1 << 6) },
+ { "Module temperature high warning", SFF_A2_WARN_FLG, (1 << 7) },
+ { "Module temperature low warning", SFF_A2_WARN_FLG, (1 << 6) },
+
+ { "Module voltage high alarm", SFF_A2_ALRM_FLG, (1 << 5) },
+ { "Module voltage low alarm", SFF_A2_ALRM_FLG, (1 << 4) },
+ { "Module voltage high warning", SFF_A2_WARN_FLG, (1 << 5) },
+ { "Module voltage low warning", SFF_A2_WARN_FLG, (1 << 4) },
+
+ { "Laser rx power high alarm", SFF_A2_ALRM_FLG + 1, (1 << 7) },
+ { "Laser rx power low alarm", SFF_A2_ALRM_FLG + 1, (1 << 6) },
+ { "Laser rx power high warning", SFF_A2_WARN_FLG + 1, (1 << 7) },
+ { "Laser rx power low warning", SFF_A2_WARN_FLG + 1, (1 << 6) },
+
+ { NULL, 0, 0 },
+};
