Hi Vlad,
> -----Original Message-----
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Vlad Zolotarov
> Sent: Wednesday, March 18, 2015 5:52 PM
> To: dev at dpdk.org
> Subject: [dpdk-dev] [PATCH v8 3/3] ixgbe: Add LRO support
>
> - Only x540 and 82599 devices support LRO.
> - Add the appropriate HW configuration.
> - Add RSC aware rx_pkt_burst() handlers:
> - Implemented bulk allocation and non-bulk allocation versions.
> - Add LRO-specific fields to rte_eth_rxmode, to rte_eth_dev_data
> and to ixgbe_rx_queue.
> - Use the appropriate handler when LRO is requested.
>
> Signed-off-by: Vlad Zolotarov <vladz at cloudius-systems.com>
> ---
> New in v8:
> - Took the RSC configuration code from ixgbe_dev_rx_init() into a separate
> function - ixgbe_set_rsc().
> - Added some missing macros for HW configuration.
> - Styling adjustments:
> - Functions names.
> - Functions descriptions.
> - Reworked the ixgbe_free_rsc_cluster() code to make it more readable.
> - Kill the HEADER_SPLIT flow in ixgbe_set_rsc() since it's not supported by
> ixgbe PMD.
>
> New in v7:
> - Free not-yet-completed RSC aggregations in rte_eth_dev_stop() flow.
> - Reset the sw_ring[].mbuf entry in a bulk allocation case.
> This is needed for ixgbe_rx_queue_release_mbufs().
> - _recv_pkts_lro(): added the missing memory barrier before RDT update in a
> non-bulk allocation case.
> - Don't allow RSC when device is configured in an SR-IOV mode.
>
> New in v5:
> - Put the RTE_ETHDEV_HAS_LRO_SUPPORT definition at the beginning of
> rte_ethdev.h.
> - Removed the "TODO: Remove me" comment near RTE_ETHDEV_HAS_LRO_SUPPORT.
>
> New in v4:
> - Define RTE_ETHDEV_HAS_LRO_SUPPORT in rte_ethdev.h instead of
> RTE_ETHDEV_LRO_SUPPORT defined in config/common_linuxapp.
>
> New in v2:
> - Removed rte_eth_dev_data.lro_bulk_alloc.
> - Fixed a few styling and spelling issues.
> ---
> lib/librte_ether/rte_ethdev.h | 9 +-
> lib/librte_net/rte_ip.h | 3 +
> lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h | 6 +
> lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 11 +
> lib/librte_pmd_ixgbe/ixgbe_ethdev.h | 5 +
> lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 610
> +++++++++++++++++++++++++++++++-
> lib/librte_pmd_ixgbe/ixgbe_rxtx.h | 6 +
> 7 files changed, 642 insertions(+), 8 deletions(-)
>
> diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
> index 21aa359..61dc49a 100644
> --- a/lib/librte_ether/rte_ethdev.h
> +++ b/lib/librte_ether/rte_ethdev.h
> @@ -172,6 +172,9 @@ extern "C" {
>
> #include <stdint.h>
>
> +/* Use this macro to check if LRO API is supported */
> +#define RTE_ETHDEV_HAS_LRO_SUPPORT
> +
> #include <rte_log.h>
> #include <rte_interrupts.h>
> #include <rte_pci.h>
> @@ -320,14 +323,15 @@ struct rte_eth_rxmode {
> enum rte_eth_rx_mq_mode mq_mode;
> uint32_t max_rx_pkt_len; /**< Only used if jumbo_frame enabled. */
> uint16_t split_hdr_size; /**< hdr buf size (header_split enabled).*/
> - uint8_t header_split : 1, /**< Header Split enable. */
> + uint16_t header_split : 1, /**< Header Split enable. */
> hw_ip_checksum : 1, /**< IP/UDP/TCP checksum offload enable.
> */
> hw_vlan_filter : 1, /**< VLAN filter enable. */
> hw_vlan_strip : 1, /**< VLAN strip enable. */
> hw_vlan_extend : 1, /**< Extended VLAN enable. */
> jumbo_frame : 1, /**< Jumbo Frame Receipt enable. */
> hw_strip_crc : 1, /**< Enable CRC stripping by hardware. */
> - enable_scatter : 1; /**< Enable scatter packets rx handler */
> + enable_scatter : 1, /**< Enable scatter packets rx handler */
> + enable_lro : 1; /**< Enable LRO */
> };
>
> /**
> @@ -1515,6 +1519,7 @@ struct rte_eth_dev_data {
> uint8_t port_id; /**< Device [external] port identifier. */
> uint8_t promiscuous : 1, /**< RX promiscuous mode ON(1) / OFF(0). */
> scattered_rx : 1, /**< RX of scattered packets is ON(1) /
> OFF(0) */
> + lro : 1, /**< RX LRO is ON(1) / OFF(0) */
> all_multicast : 1, /**< RX all multicast mode ON(1) / OFF(0). */
> dev_started : 1; /**< Device state: STARTED(1) / STOPPED(0).
> */
> };
> diff --git a/lib/librte_net/rte_ip.h b/lib/librte_net/rte_ip.h
> index 64935d9..74c9ced 100644
> --- a/lib/librte_net/rte_ip.h
> +++ b/lib/librte_net/rte_ip.h
> @@ -110,6 +110,9 @@ struct ipv4_hdr {
> (((c) & 0xff) << 8) | \
> ((d) & 0xff))
>
> +/** Maximal IPv4 packet length (including a header) */
> +#define IPV4_MAX_PKT_LEN 65535
> +
> /** Internet header length mask for version_ihl field */
> #define IPV4_HDR_IHL_MASK (0x0f)
> /**
> diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h
> b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h
> index 9a66370..4998627 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h
> +++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h
> @@ -234,8 +234,14 @@ struct ixgbe_thermal_sensor_data {
> #define IXGBE_EITR(_i) (((_i) <= 23) ? (0x00820 + ((_i) * 4))
> : \
> (0x012300 + (((_i) - 24) * 4)))
> #define IXGBE_EITR_ITR_INT_MASK 0x00000FF8
> +#define IXGBE_EITR_ITR_INT_SHIFT 3
> #define IXGBE_EITR_LLI_MOD 0x00008000
> #define IXGBE_EITR_CNT_WDIS 0x80000000
> +/* EITR Inteval is in 2048ns uinits for 1G and 10G link */
> +#define IXGBE_EITR_INTERVAL_UNIT_NS 2048
Why is that? Why not just 2us as 82599 spec says?
And then:
+#define IXGBE_EITR_INTERVAL_US(us) (((us) / IXGBE_EITR_INTERVAL_UNIT_US <<
IXGBE_EITR_ITR_INT_SHIFT) & IXGBE_EITR_ITR_INT_MASK)
?
> +#define IXGBE_EITR_INTERVAL_US(us) \
> + (((us) * 1000 / IXGBE_EITR_INTERVAL_UNIT_NS << IXGBE_EITR_ITR_INT_SHIFT)
> & \
> + IXGBE_EITR_ITR_INT_MASK)
Unfortunately we are not supposed to change files under ixgbe subfirectory
(except ixgbe_osdep.*).
These files comes from ixgbe shared code and we treat them as read-only.
You need to move these new macros you added into ixgbe_ethedev.h.
All other things look good to me.
Konstantin
> #define IXGBE_IVAR(_i) (0x00900 + ((_i) * 4)) /* 24 at
> 0x900-0x960 */
> #define IXGBE_IVAR_MISC 0x00A00 /* misc MSI-X interrupt causes
> */
> #define IXGBE_EITRSEL 0x00894
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> index 92d75db..923692e 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> +++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> @@ -1645,6 +1645,7 @@ ixgbe_dev_stop(struct rte_eth_dev *dev)
>
> /* Clear stored conf */
> dev->data->scattered_rx = 0;
> + dev->data->lro = 0;
>
> /* Clear recorded link status */
> memset(&link, 0, sizeof(link));
> @@ -2013,6 +2014,16 @@ ixgbe_dev_info_get(struct rte_eth_dev *dev, struct
> rte_eth_dev_info *dev_info)
> DEV_RX_OFFLOAD_IPV4_CKSUM |
> DEV_RX_OFFLOAD_UDP_CKSUM |
> DEV_RX_OFFLOAD_TCP_CKSUM;
> +
> + /*
> + * RSC is only supported by 82599 and x540 PF devices in a non-SR-IOV
> + * mode.
> + */
> + if ((hw->mac.type == ixgbe_mac_82599EB ||
> + hw->mac.type == ixgbe_mac_X540) &&
> + !RTE_ETH_DEV_SRIOV(dev).active)
> + dev_info->rx_offload_capa |= DEV_RX_OFFLOAD_TCP_LRO;
> +
> dev_info->tx_offload_capa =
> DEV_TX_OFFLOAD_VLAN_INSERT |
> DEV_TX_OFFLOAD_IPV4_CKSUM |
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
> b/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
> index ffe3471..7050340 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
> +++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
> @@ -344,6 +344,11 @@ uint16_t ixgbe_recv_pkts(void *rx_queue, struct rte_mbuf
> **rx_pkts,
> uint16_t ixgbe_recv_scattered_pkts(void *rx_queue,
> struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
>
> +uint16_t ixgbe_recv_pkts_lro_single_alloc(void *rx_queue,
> + struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
> +uint16_t ixgbe_recv_pkts_lro_bulk_alloc(void *rx_queue,
> + struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
> +
> uint16_t ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
> uint16_t nb_pkts);
>
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> index a08ae6a..daa4c45 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> @@ -70,6 +70,7 @@
> #include <rte_sctp.h>
> #include <rte_string_fns.h>
> #include <rte_errno.h>
> +#include <rte_ip.h>
>
> #include "ixgbe_logs.h"
> #include "ixgbe/ixgbe_api.h"
> @@ -1422,6 +1423,295 @@ ixgbe_fill_cluster_head_buf(
> }
> }
>
> +/**
> + * ixgbe_recv_pkts_lro - receive handler for and LRO case.
> + *
> + * @rx_queue Rx queue handle
> + * @rx_pkts table of received packets
> + * @nb_pkts size of rx_pkts table
> + * @bulk_alloc if TRUE bulk allocation is used for a HW ring refilling
> + *
> + * Handles the Rx HW ring completions when RSC feature is configured. Uses an
> + * additional ring of ixgbe_rsc_entry's that will hold the relevant RSC info.
> + *
> + * We use the same logic as in Lunux and in FreeBSD ixgbe drivers:
> + * 1) When non-EOP RSC completion arrives:
> + * a) Update the HEAD of the current RSC aggregation cluster with the new
> + * segment's data length.
> + * b) Set the "next" pointer of the current segment to point to the
> segment
> + * at the NEXTP index.
> + * c) Pass the HEAD of RSC aggregation cluster on to the next NEXTP entry
> + * in the sw_rsc_ring.
> + * 2) When EOP arrives we just update the cluster's total length and offload
> + * flags and deliver the cluster up to the upper layers. In our case -
> put it
> + * in the rx_pkts table.
> + *
> + * Returns the number of received packets/clusters (according to the "bulk
> + * receive" interface).
> + */
> +static inline uint16_t
> +ixgbe_recv_pkts_lro(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t
> nb_pkts,
> + bool bulk_alloc)
> +{
> + struct ixgbe_rx_queue *rxq = rx_queue;
> + volatile union ixgbe_adv_rx_desc *rx_ring = rxq->rx_ring;
> + struct ixgbe_rx_entry *sw_ring = rxq->sw_ring;
> + struct ixgbe_rsc_entry *sw_rsc_ring = rxq->sw_rsc_ring;
> + uint16_t rx_id = rxq->rx_tail;
> + uint16_t nb_rx = 0;
> + uint16_t nb_hold = rxq->nb_rx_hold;
> + uint16_t prev_id = rxq->rx_tail;
> +
> + while (nb_rx < nb_pkts) {
> + bool eop;
> + struct ixgbe_rx_entry *rxe;
> + struct ixgbe_rsc_entry *rsc_entry;
> + struct ixgbe_rsc_entry *next_rsc_entry;
> + struct ixgbe_rx_entry *next_rxe;
> + struct rte_mbuf *first_seg;
> + struct rte_mbuf *rxm;
> + struct rte_mbuf *nmb;
> + union ixgbe_adv_rx_desc rxd;
> + uint16_t data_len;
> + uint16_t next_id;
> + volatile union ixgbe_adv_rx_desc *rxdp;
> + uint32_t staterr;
> +
> +next_desc:
> + /*
> + * The code in this whole file uses the volatile pointer to
> + * ensure the read ordering of the status and the rest of the
> + * descriptor fields (on the compiler level only!!!). This is so
> + * UGLY - why not to just use the compiler barrier instead? DPDK
> + * even has the rte_compiler_barrier() for that.
> + *
> + * But most importantly this is just wrong because this doesn't
> + * ensure memory ordering in a general case at all. For
> + * instance, DPDK is supposed to work on Power CPUs where
> + * compiler barrier may just not be enough!
> + *
> + * I tried to write only this function properly to have a
> + * starting point (as a part of an LRO/RSC series) but the
> + * compiler cursed at me when I tried to cast away the
> + * "volatile" from rx_ring (yes, it's volatile too!!!). So, I'm
> + * keeping it the way it is for now.
> + *
> + * The code in this file is broken in so many other places and
> + * will just not work on a big endian CPU anyway therefore the
> + * lines below will have to be revisited together with the rest
> + * of the ixgbe PMD.
> + *
> + * TODO:
> + * - Get rid of "volatile" crap and let the compiler do its
> + * job.
> + * - Use the proper memory barrier (rte_rmb()) to ensure the
> + * memory ordering below.
> + */
> + rxdp = &rx_ring[rx_id];
> + staterr = rte_le_to_cpu_32(rxdp->wb.upper.status_error);
> +
> + if (!(staterr & IXGBE_RXDADV_STAT_DD))
> + break;
> +
> + rxd = *rxdp;
> +
> + PMD_RX_LOG(DEBUG, "port_id=%u queue_id=%u rx_id=%u "
> + "staterr=0x%x data_len=%u",
> + rxq->port_id, rxq->queue_id, rx_id, staterr,
> + rte_le_to_cpu_16(rxd.wb.upper.length));
> +
> + if (!bulk_alloc) {
> + nmb = rte_rxmbuf_alloc(rxq->mb_pool);
> + if (nmb == NULL) {
> + PMD_RX_LOG(DEBUG, "RX mbuf alloc failed "
> + "port_id=%u queue_id=%u",
> + rxq->port_id, rxq->queue_id);
> +
> + rte_eth_devices[rxq->port_id].data->
> + rx_mbuf_alloc_failed++;
> + break;
> + }
> + } else if (nb_hold > rxq->rx_free_thresh) {
> + uint16_t next_rdt = rxq->rx_free_trigger;
> +
> + if (!ixgbe_rx_alloc_bufs(rxq, false)) {
> + rte_wmb();
> + IXGBE_PCI_REG_WRITE(rxq->rdt_reg_addr,
> + next_rdt);
> + nb_hold -= rxq->rx_free_thresh;
> + } else {
> + PMD_RX_LOG(DEBUG, "RX bulk alloc failed "
> + "port_id=%u queue_id=%u",
> + rxq->port_id, rxq->queue_id);
> +
> + rte_eth_devices[rxq->port_id].data->
> + rx_mbuf_alloc_failed++;
> + break;
> + }
> + }
> +
> + nb_hold++;
> + rxe = &sw_ring[rx_id];
> + eop = staterr & IXGBE_RXDADV_STAT_EOP;
> +
> + next_id = rx_id + 1;
> + if (next_id == rxq->nb_rx_desc)
> + next_id = 0;
> +
> + /* Prefetch next mbuf while processing current one. */
> + rte_ixgbe_prefetch(sw_ring[next_id].mbuf);
> +
> + /*
> + * When next RX descriptor is on a cache-line boundary,
> + * prefetch the next 4 RX descriptors and the next 4 pointers
> + * to mbufs.
> + */
> + if ((next_id & 0x3) == 0) {
> + rte_ixgbe_prefetch(&rx_ring[next_id]);
> + rte_ixgbe_prefetch(&sw_ring[next_id]);
> + }
> +
> + rxm = rxe->mbuf;
> +
> + if (!bulk_alloc) {
> + __le64 dma =
> + rte_cpu_to_le_64(RTE_MBUF_DATA_DMA_ADDR_DEFAULT(nmb));
> + /*
> + * Update RX descriptor with the physical address of the
> + * new data buffer of the new allocated mbuf.
> + */
> + rxe->mbuf = nmb;
> +
> + rxm->data_off = RTE_PKTMBUF_HEADROOM;
> + rxdp->read.hdr_addr = dma;
> + rxdp->read.pkt_addr = dma;
> + } else
> + rxe->mbuf = NULL;
> +
> + /*
> + * Set data length & data buffer address of mbuf.
> + */
> + data_len = rte_le_to_cpu_16(rxd.wb.upper.length);
> + rxm->data_len = data_len;
> +
> + if (!eop) {
> + uint16_t nextp_id;
> + /*
> + * Get next descriptor index:
> + * - For RSC it's in the NEXTP field.
> + * - For a scattered packet - it's just a following
> + * descriptor.
> + */
> + if (ixgbe_rsc_count(&rxd))
> + nextp_id =
> + (staterr & IXGBE_RXDADV_NEXTP_MASK) >>
> + IXGBE_RXDADV_NEXTP_SHIFT;
> + else
> + nextp_id = next_id;
> +
> + next_rsc_entry = &sw_rsc_ring[nextp_id];
> + next_rxe = &sw_ring[nextp_id];
> + rte_ixgbe_prefetch(next_rxe);
> + }
> +
> + rsc_entry = &sw_rsc_ring[rx_id];
> + first_seg = rsc_entry->fbuf;
> + rsc_entry->fbuf = NULL;
> +
> + /*
> + * If this is the first buffer of the received packet,
> + * set the pointer to the first mbuf of the packet and
> + * initialize its context.
> + * Otherwise, update the total length and the number of segments
> + * of the current scattered packet, and update the pointer to
> + * the last mbuf of the current packet.
> + */
> + if (first_seg == NULL) {
> + first_seg = rxm;
> + first_seg->pkt_len = data_len;
> + first_seg->nb_segs = 1;
> + } else {
> + first_seg->pkt_len += data_len;
> + first_seg->nb_segs++;
> + }
> +
> + prev_id = rx_id;
> + rx_id = next_id;
> +
> + /*
> + * If this is not the last buffer of the received packet, update
> + * the pointer to the first mbuf at the NEXTP entry in the
> + * sw_rsc_ring and continue to parse the RX ring.
> + */
> + if (!eop) {
> + rxm->next = next_rxe->mbuf;
> + next_rsc_entry->fbuf = first_seg;
> + goto next_desc;
> + }
> +
> + /*
> + * This is the last buffer of the received packet - return
> + * the current cluster to the user.
> + */
> + rxm->next = NULL;
> +
> + /* Initialize the first mbuf of the returned packet */
> + ixgbe_fill_cluster_head_buf(first_seg, &rxd, rxq->port_id,
> + staterr);
> +
> + /* Prefetch data of first segment, if configured to do so. */
> + rte_packet_prefetch((char *)first_seg->buf_addr +
> + first_seg->data_off);
> +
> + /*
> + * Store the mbuf address into the next entry of the array
> + * of returned packets.
> + */
> + rx_pkts[nb_rx++] = first_seg;
> + }
> +
> + /*
> + * Record index of the next RX descriptor to probe.
> + */
> + rxq->rx_tail = rx_id;
> +
> + /*
> + * If the number of free RX descriptors is greater than the RX free
> + * threshold of the queue, advance the Receive Descriptor Tail (RDT)
> + * register.
> + * Update the RDT with the value of the last processed RX descriptor
> + * minus 1, to guarantee that the RDT register is never equal to the
> + * RDH register, which creates a "full" ring situtation from the
> + * hardware point of view...
> + */
> + if (!bulk_alloc && nb_hold > rxq->rx_free_thresh) {
> + PMD_RX_LOG(DEBUG, "port_id=%u queue_id=%u rx_tail=%u "
> + "nb_hold=%u nb_rx=%u",
> + rxq->port_id, rxq->queue_id, rx_id, nb_hold, nb_rx);
> +
> + rte_wmb();
> + IXGBE_PCI_REG_WRITE(rxq->rdt_reg_addr, prev_id);
> + nb_hold = 0;
> + }
> +
> + rxq->nb_rx_hold = nb_hold;
> + return nb_rx;
> +}
> +
> +uint16_t
> +ixgbe_recv_pkts_lro_single_alloc(void *rx_queue, struct rte_mbuf **rx_pkts,
> + uint16_t nb_pkts)
> +{
> + return ixgbe_recv_pkts_lro(rx_queue, rx_pkts, nb_pkts, false);
> +}
> +
> +uint16_t
> +ixgbe_recv_pkts_lro_bulk_alloc(void *rx_queue, struct rte_mbuf **rx_pkts,
> + uint16_t nb_pkts)
> +{
> + return ixgbe_recv_pkts_lro(rx_queue, rx_pkts, nb_pkts, true);
> +}
> +
> uint16_t
> ixgbe_recv_scattered_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
> uint16_t nb_pkts)
> @@ -2005,6 +2295,31 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev *dev,
> return (0);
> }
>
> +/**
> + * ixgbe_free_rsc_cluster - free the not-yet-completed RSC cluster
> + *
> + * The "next" pointer of the last segment of (not-yet-completed) RSC clusters
> + * in the sw_rsc_ring is not set to NULL but rather points to the next
> + * mbuf of this RSC aggregation (that has not been completed yet and still
> + * resides on the HW ring). So, instead of calling for rte_pktmbuf_free() we
> + * will just free first "nb_segs" segments of the cluster explicitly by
> calling
> + * an rte_pktmbuf_free_seg().
> + *
> + * @m RSC cluster head
> + */
> +static void
> +ixgbe_free_rsc_cluster(struct rte_mbuf *m)
> +{
> + uint8_t i, nb_segs = m->nb_segs;
> + struct rte_mbuf *next_seg;
> +
> + for (i = 0; i < nb_segs; i++) {
> + next_seg = m->next;
> + rte_pktmbuf_free_seg(m);
> + m = next_seg;
> + }
> +}
> +
> static void
> ixgbe_rx_queue_release_mbufs(struct ixgbe_rx_queue *rxq)
> {
> @@ -2028,6 +2343,13 @@ ixgbe_rx_queue_release_mbufs(struct ixgbe_rx_queue
> *rxq)
> }
> #endif
> }
> +
> + if (rxq->sw_rsc_ring)
> + for (i = 0; i < rxq->nb_rx_desc; i++)
> + if (rxq->sw_rsc_ring[i].fbuf) {
> +
> ixgbe_free_rsc_cluster(rxq->sw_rsc_ring[i].fbuf);
> + rxq->sw_rsc_ring[i].fbuf = NULL;
> + }
> }
>
> static void
> @@ -2036,6 +2358,7 @@ ixgbe_rx_queue_release(struct ixgbe_rx_queue *rxq)
> if (rxq != NULL) {
> ixgbe_rx_queue_release_mbufs(rxq);
> rte_free(rxq->sw_ring);
> + rte_free(rxq->sw_rsc_ring);
> rte_free(rxq);
> }
> }
> @@ -2158,6 +2481,7 @@ ixgbe_reset_rx_queue(struct ixgbe_hw *hw, struct
> ixgbe_rx_queue *rxq)
> rxq->nb_rx_hold = 0;
> rxq->pkt_first_seg = NULL;
> rxq->pkt_last_seg = NULL;
> + rxq->rsc_en = 0;
> }
>
> int
> @@ -2172,6 +2496,14 @@ ixgbe_dev_rx_queue_setup(struct rte_eth_dev *dev,
> struct ixgbe_rx_queue *rxq;
> struct ixgbe_hw *hw;
> uint16_t len;
> + struct rte_eth_dev_info dev_info = { 0 };
> + struct rte_eth_rxmode *dev_rx_mode = &dev->data->dev_conf.rxmode;
> + bool rsc_requested = false;
> +
> + dev->dev_ops->dev_infos_get(dev, &dev_info);
> + if ((dev_info.rx_offload_capa & DEV_RX_OFFLOAD_TCP_LRO) &&
> + dev_rx_mode->enable_lro)
> + rsc_requested = true;
>
> PMD_INIT_FUNC_TRACE();
> hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> @@ -2277,12 +2609,27 @@ ixgbe_dev_rx_queue_setup(struct rte_eth_dev *dev,
> rxq->sw_ring = rte_zmalloc_socket("rxq->sw_ring",
> sizeof(struct ixgbe_rx_entry) * len,
> RTE_CACHE_LINE_SIZE, socket_id);
> - if (rxq->sw_ring == NULL) {
> + if (!rxq->sw_ring) {
> ixgbe_rx_queue_release(rxq);
> return (-ENOMEM);
> }
> - PMD_INIT_LOG(DEBUG, "sw_ring=%p hw_ring=%p dma_addr=0x%"PRIx64,
> - rxq->sw_ring, rxq->rx_ring, rxq->rx_ring_phys_addr);
> +
> + if (rsc_requested) {
> + rxq->sw_rsc_ring =
> + rte_zmalloc_socket("rxq->sw_rsc_ring",
> + sizeof(struct ixgbe_rsc_entry) * len,
> + RTE_CACHE_LINE_SIZE, socket_id);
> + if (!rxq->sw_rsc_ring) {
> + ixgbe_rx_queue_release(rxq);
> + return (-ENOMEM);
> + }
> + } else
> + rxq->sw_rsc_ring = NULL;
> +
> + PMD_INIT_LOG(DEBUG, "sw_ring=%p sw_rsc_ring=%p hw_ring=%p "
> + "dma_addr=0x%"PRIx64,
> + rxq->sw_ring, rxq->sw_rsc_ring, rxq->rx_ring,
> + rxq->rx_ring_phys_addr);
>
> if (!rte_is_power_of_2(nb_desc)) {
> PMD_INIT_LOG(DEBUG, "queue[%d] doesn't meet Vector Rx "
> @@ -3527,6 +3874,91 @@ ixgbe_dev_mq_tx_configure(struct rte_eth_dev *dev)
> return 0;
> }
>
> +/**
> + * ixgbe_get_rscctl_maxdesc - Calculate the RSCCTL[n].MAXDESC for PF
> + *
> + * Return the RSCCTL[n].MAXDESC for 82599 and x540 PF devices according to
> the
> + * spec rev. 3.0 chapter 8.2.3.8.13.
> + *
> + * @pool Memory pool of the Rx queue
> + */
> +static inline uint32_t
> +ixgbe_get_rscctl_maxdesc(struct rte_mempool *pool)
> +{
> + struct rte_pktmbuf_pool_private *mp_priv = rte_mempool_get_priv(pool);
> +
> + /* MAXDESC * SRRCTL.BSIZEPKT must not exceed 64 KB minus one */
> + uint16_t maxdesc =
> + IPV4_MAX_PKT_LEN /
> + (mp_priv->mbuf_data_room_size - RTE_PKTMBUF_HEADROOM);
> +
> + if (maxdesc >= 16)
> + return IXGBE_RSCCTL_MAXDESC_16;
> + else if (maxdesc >= 8)
> + return IXGBE_RSCCTL_MAXDESC_8;
> + else if (maxdesc >= 4)
> + return IXGBE_RSCCTL_MAXDESC_4;
> + else
> + return IXGBE_RSCCTL_MAXDESC_1;
> +}
> +
> +/**
> + * ixgbe_set_ivar - Setup the correct IVAR register for a particular MSIX
> + * interrupt
> + *
> + * (Taken from FreeBSD tree)
> + * (yes this is all very magic and confusing :)
> + *
> + * @dev port handle
> + * @entry the register array entry
> + * @vector the MSIX vector for this queue
> + * @type RX/TX/MISC
> + */
> +static void
> +ixgbe_set_ivar(struct rte_eth_dev *dev, u8 entry, u8 vector, s8 type)
> +{
> + struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> + u32 ivar, index;
> +
> + vector |= IXGBE_IVAR_ALLOC_VAL;
> +
> + switch (hw->mac.type) {
> +
> + case ixgbe_mac_82598EB:
> + if (type == -1)
> + entry = IXGBE_IVAR_OTHER_CAUSES_INDEX;
> + else
> + entry += (type * 64);
> + index = (entry >> 2) & 0x1F;
> + ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(index));
> + ivar &= ~(0xFF << (8 * (entry & 0x3)));
> + ivar |= (vector << (8 * (entry & 0x3)));
> + IXGBE_WRITE_REG(hw, IXGBE_IVAR(index), ivar);
> + break;
> +
> + case ixgbe_mac_82599EB:
> + case ixgbe_mac_X540:
> + if (type == -1) { /* MISC IVAR */
> + index = (entry & 1) * 8;
> + ivar = IXGBE_READ_REG(hw, IXGBE_IVAR_MISC);
> + ivar &= ~(0xFF << index);
> + ivar |= (vector << index);
> + IXGBE_WRITE_REG(hw, IXGBE_IVAR_MISC, ivar);
> + } else { /* RX/TX IVARS */
> + index = (16 * (entry & 1)) + (8 * type);
> + ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(entry >> 1));
> + ivar &= ~(0xFF << index);
> + ivar |= (vector << index);
> + IXGBE_WRITE_REG(hw, IXGBE_IVAR(entry >> 1), ivar);
> + }
> +
> + break;
> +
> + default:
> + break;
> + }
> +}
> +
> void ixgbe_set_rx_function(struct rte_eth_dev *dev)
> {
> struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> @@ -3545,7 +3977,24 @@ void ixgbe_set_rx_function(struct rte_eth_dev *dev)
> hw->rx_vec_allowed = false;
> }
>
> - if (dev->data->scattered_rx) {
> + /*
> + * Initialize the appropriate LRO callback.
> + *
> + * If all queues satisfy the bulk allocation preconditions
> + * (hw->rx_bulk_alloc_allowed is TRUE) then we may use bulk allocation.
> + * Otherwise use a single allocation version.
> + */
> + if (dev->data->lro) {
> + if (hw->rx_bulk_alloc_allowed) {
> + PMD_INIT_LOG(INFO, "LRO is requested. Using a bulk "
> + "allocation version");
> + dev->rx_pkt_burst = ixgbe_recv_pkts_lro_bulk_alloc;
> + } else {
> + PMD_INIT_LOG(INFO, "LRO is requested. Using a single "
> + "allocation version");
> + dev->rx_pkt_burst = ixgbe_recv_pkts_lro_single_alloc;
> + }
> + } else if (dev->data->scattered_rx) {
> /*
> * Set the non-LRO scattered callback: there are Vector and
> * single allocation versions.
> @@ -3595,6 +4044,149 @@ void ixgbe_set_rx_function(struct rte_eth_dev *dev)
> }
> }
>
> +/**
> + * ixgbe_set_rsc - configure RSC related port HW registers
> + *
> + * Configures the port's RSC related registers according to the 4.6.7.2
> chapter
> + * of 82599 Spec (x540 configuration is virtually the same).
> + *
> + * @dev port handle
> + *
> + * Returns 0 in case of success or a non-zero error code
> + */
> +static int
> +ixgbe_set_rsc(struct rte_eth_dev *dev)
> +{
> + struct rte_eth_rxmode *rx_conf = &dev->data->dev_conf.rxmode;
> + struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> + struct rte_eth_dev_info dev_info = { 0 };
> + bool rsc_capable = false;
> + uint16_t i;
> + uint32_t rdrxctl;
> +
> + /* Sanity check */
> + dev->dev_ops->dev_infos_get(dev, &dev_info);
> + if (dev_info.rx_offload_capa & DEV_RX_OFFLOAD_TCP_LRO)
> + rsc_capable = true;
> +
> + if (!rsc_capable && rx_conf->enable_lro) {
> + PMD_INIT_LOG(CRIT, "LRO is requested on HW that doesn't "
> + "support it");
> + return -EINVAL;
> + }
> +
> + /* RSC global configuration (chapter 4.6.7.2.1 of 82599 Spec) */
> +
> + if (!rx_conf->hw_strip_crc && rx_conf->enable_lro) {
> + /*
> + * According to chapter of 4.6.7.2.1 of the Spec Rev.
> + * 3.0 RSC configuration requires HW CRC stripping being
> + * enabled. If user requested both HW CRC stripping off
> + * and RSC on - return an error.
> + */
> + PMD_INIT_LOG(CRIT, "LRO can't be enabled when HW CRC "
> + "is disabled");
> + return -EINVAL;
> + }
> +
> + /* RFCTL configuration */
> + if (rsc_capable) {
> + uint32_t rfctl = IXGBE_READ_REG(hw, IXGBE_RFCTL);
> + if (rx_conf->enable_lro)
> + /*
> + * Since NFS packets coalescing is not supported - clear
> + * RFCTL.NFSW_DIS and RFCTL.NFSR_DIS when RSC is
> + * enabled.
> + */
> + rfctl &= ~(IXGBE_RFCTL_RSC_DIS | IXGBE_RFCTL_NFSW_DIS |
> + IXGBE_RFCTL_NFSR_DIS);
> + else
> + rfctl |= IXGBE_RFCTL_RSC_DIS;
> +
> + IXGBE_WRITE_REG(hw, IXGBE_RFCTL, rfctl);
> + }
> +
> + /* If LRO hasn't been requested - we are done here. */
> + if (!rx_conf->enable_lro)
> + return 0;
> +
> + /* Set RDRXCTL.RSCACKC bit */
> + rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
> + rdrxctl |= IXGBE_RDRXCTL_RSCACKC;
> + IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl);
> +
> + /* Per-queue RSC configuration (chapter 4.6.7.2.2 of 82599 Spec) */
> + for (i = 0; i < dev->data->nb_rx_queues; i++) {
> + struct ixgbe_rx_queue *rxq = dev->data->rx_queues[i];
> + uint32_t srrctl =
> + IXGBE_READ_REG(hw, IXGBE_SRRCTL(rxq->reg_idx));
> + uint32_t rscctl =
> + IXGBE_READ_REG(hw, IXGBE_RSCCTL(rxq->reg_idx));
> + uint32_t psrtype =
> + IXGBE_READ_REG(hw, IXGBE_PSRTYPE(rxq->reg_idx));
> + uint32_t eitr =
> + IXGBE_READ_REG(hw, IXGBE_EITR(rxq->reg_idx));
> +
> + /*
> + * ixgbe PMD doesn't support header-split at the moment.
> + *
> + * Following the 4.6.7.2.1 chapter of the 82599/x540
> + * Spec if RSC is enabled the SRRCTL[n].BSIZEHEADER
> + * should be configured even if header split is not
> + * enabled. We will configure it 128 bytes following the
> + * recommendation in the spec.
> + */
> + srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
> + srrctl |= (128 << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
> + IXGBE_SRRCTL_BSIZEHDR_MASK;
> +
> + /*
> + * TODO: Consider setting the Receive Descriptor Minimum
> + * Threshold Size for an RSC case. This is not an obviously
> + * beneficiary option but the one worth considering...
> + */
> +
> + rscctl |= IXGBE_RSCCTL_RSCEN;
> + rscctl |= ixgbe_get_rscctl_maxdesc(rxq->mb_pool);
> + psrtype |= IXGBE_PSRTYPE_TCPHDR;
> +
> + /*
> + * RSC: Set ITR interval corresponding to 2K ints/s.
> + *
> + * Full-sized RSC aggregations for a 10Gb/s link will
> + * arrive at about 20K aggregation/s rate.
> + *
> + * 2K inst/s rate will make only 10% of the
> + * aggregations to be closed due to the interrupt timer
> + * expiration for a streaming at wire-speed case.
> + *
> + * For a sparse streaming case this setting will yield
> + * at most 500us latency for a single RSC aggregation.
> + */
> + eitr &= ~IXGBE_EITR_ITR_INT_MASK;
> + eitr |= IXGBE_EITR_INTERVAL_US(500) | IXGBE_EITR_CNT_WDIS;
> +
> + IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(rxq->reg_idx), srrctl);
> + IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(rxq->reg_idx), rscctl);
> + IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(rxq->reg_idx), psrtype);
> + IXGBE_WRITE_REG(hw, IXGBE_EITR(rxq->reg_idx), eitr);
> +
> + /*
> + * RSC requires the mapping of the queue to the
> + * interrupt vector.
> + */
> + ixgbe_set_ivar(dev, rxq->reg_idx, i, 0);
> +
> + rxq->rsc_en = 1;
> + }
> +
> + dev->data->lro = 1;
> +
> + PMD_INIT_LOG(INFO, "enabling LRO mode");
> +
> + return 0;
> +}
> +
> /*
> * Initializes Receive Unit.
> */
> @@ -3615,6 +4207,7 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
> uint16_t buf_size;
> uint16_t i;
> struct rte_eth_rxmode *rx_conf = &dev->data->dev_conf.rxmode;
> + int rc;
>
> PMD_INIT_FUNC_TRACE();
> hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> @@ -3724,6 +4317,7 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
> RTE_PKTMBUF_HEADROOM);
> srrctl |= ((buf_size >> IXGBE_SRRCTL_BSIZEPKT_SHIFT) &
> IXGBE_SRRCTL_BSIZEPKT_MASK);
> +
> IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(rxq->reg_idx), srrctl);
>
> buf_size = (uint16_t) ((srrctl & IXGBE_SRRCTL_BSIZEPKT_MASK) <<
> @@ -3738,8 +4332,6 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
> if (rx_conf->enable_scatter)
> dev->data->scattered_rx = 1;
>
> - ixgbe_set_rx_function(dev);
> -
> /*
> * Device configured with multiple RX queues.
> */
> @@ -3770,6 +4362,12 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
> IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl);
> }
>
> + rc = ixgbe_set_rsc(dev);
> + if (rc)
> + return rc;
> +
> + ixgbe_set_rx_function(dev);
> +
> return 0;
> }
>
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
> b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
> index 3937cf6..120bbbd 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
> +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
> @@ -79,6 +79,10 @@ struct ixgbe_rx_entry {
> struct rte_mbuf *mbuf; /**< mbuf associated with RX descriptor. */
> };
>
> +struct ixgbe_rsc_entry {
> + struct rte_mbuf *fbuf; /**< First segment of the fragmented packet. */
> +};
> +
> /**
> * Structure associated with each descriptor of the TX ring of a TX queue.
> */
> @@ -105,6 +109,7 @@ struct ixgbe_rx_queue {
> volatile uint32_t *rdt_reg_addr; /**< RDT register address. */
> volatile uint32_t *rdh_reg_addr; /**< RDH register address. */
> struct ixgbe_rx_entry *sw_ring; /**< address of RX software ring. */
> + struct ixgbe_rsc_entry *sw_rsc_ring; /**< address of RSC software ring.
> */
> struct rte_mbuf *pkt_first_seg; /**< First segment of current packet. */
> struct rte_mbuf *pkt_last_seg; /**< Last segment of current packet. */
> uint64_t mbuf_initializer; /**< value to init mbufs */
> @@ -126,6 +131,7 @@ struct ixgbe_rx_queue {
> uint8_t port_id; /**< Device port identifier. */
> uint8_t crc_len; /**< 0 if CRC stripped, 4 otherwise. */
> uint8_t drop_en; /**< If not 0, set SRRCTL.Drop_En. */
> + uint8_t rsc_en; /**< If not 0, RSC is enabled. */
> uint8_t rx_deferred_start; /**< not in global dev start. */
> #ifdef RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC
> /** need to alloc dummy mbuf, for wraparound when scanning hw ring */
> --
> 2.1.0
