[PATCH] net/i40e: fix max frmame size config at port level

[wenxuanx . wu]

From: Wenxuan Wu <wenxuanx...@intel.com>

Previously, max frame size can only be set when link is up, and the wait
time is 1 sec. But for nic media type of I40E_10G_BASET would consume longer
time which is too short to up would result in error.

Acctually, max frame size of media type I40E_MEDIA_TYPE_BASET can be set
regardless of link status.

This patch omit the status check of 10G_MEDIA_TYPE_BASET.

Fixes: a4ba77367923 ("net/i40e: enable maximum frame size at port level")
Cc: sta...@dpdk.org

Signed-off-by: Wenxuan Wu <wenxuanx...@intel.com>
---
 drivers/net/i40e/i40e_ethdev.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 755786dc10..5762cd526a 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -12102,23 +12102,21 @@ i40e_set_mac_max_frame(struct rte_eth_dev *dev, 
uint16_t size)
        struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
        uint32_t rep_cnt = MAX_REPEAT_TIME;
        struct rte_eth_link link;
-       enum i40e_status_code status;
+       enum i40e_status_code status = I40E_ERR_DEVICE_NOT_SUPPORTED;
 
        do {
                update_link_reg(hw, &link);
                if (link.link_status)
                        break;
-
                rte_delay_ms(CHECK_INTERVAL);
        } while (--rep_cnt);
 
-       if (link.link_status) {
+       /* Only I40E_MEDIA_TYPE_FIBER link up should be guaranteed */
+       if (hw->phy.media_type == I40E_MEDIA_TYPE_BASET || link.link_status)
                status = i40e_aq_set_mac_config(hw, size, TRUE, 0, false, NULL);
-               if (status != I40E_SUCCESS)
-                       PMD_DRV_LOG(ERR, "Failed to set max frame size at port 
level");
-       } else {
-               PMD_DRV_LOG(ERR, "Set max frame size at port level not 
applicable on link down");
-       }
+
+       if (status != I40E_SUCCESS)
+               PMD_DRV_LOG(ERR, "Failed to set max frame size at port level");
 }
 
 RTE_LOG_REGISTER_SUFFIX(i40e_logtype_init, init, NOTICE);
-- 
2.25.1