Enable time counter based threshold for raising SSO EXE_INT instead of IAQ threshold. Time counter based threshold helps getting periodic interrupts and process pkts in burst instead of getting HW to raise an interrupt for every new work.
Signed-off-by: Nithin Dabilpuram <ndabilpu...@marvell.com> --- drivers/common/cnxk/roc_nix_inl_dev_irq.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/common/cnxk/roc_nix_inl_dev_irq.c b/drivers/common/cnxk/roc_nix_inl_dev_irq.c index d758e0c..8a0cb74 100644 --- a/drivers/common/cnxk/roc_nix_inl_dev_irq.c +++ b/drivers/common/cnxk/roc_nix_inl_dev_irq.c @@ -5,6 +5,8 @@ #include "roc_api.h" #include "roc_priv.h" +#define WORK_LIMIT 1000 + static void nix_inl_sso_work_cb(struct nix_inl_dev *inl_dev) { @@ -15,6 +17,7 @@ nix_inl_sso_work_cb(struct nix_inl_dev *inl_dev) __uint128_t get_work; uint64_t u64[2]; } gw; + uint16_t cnt = 0; uint64_t work; again: @@ -33,7 +36,9 @@ nix_inl_sso_work_cb(struct nix_inl_dev *inl_dev) else plt_warn("Undelivered inl dev work gw0: %p gw1: %p", (void *)gw.u64[0], (void *)gw.u64[1]); - goto again; + cnt++; + if (cnt < WORK_LIMIT) + goto again; } plt_atomic_thread_fence(__ATOMIC_ACQ_REL); @@ -138,8 +143,10 @@ nix_inl_sso_register_irqs(struct nix_inl_dev *inl_dev) /* Enable hw interrupt */ plt_write64(~0ull, sso_base + SSO_LF_GGRP_INT_ENA_W1S); - /* Setup threshold for work exec interrupt to 1 wqe in IAQ */ - plt_write64(0x1ull, sso_base + SSO_LF_GGRP_INT_THR); + /* Setup threshold for work exec interrupt to 100us timeout + * based on time counter. + */ + plt_write64(BIT_ULL(63) | 10ULL << 48, sso_base + SSO_LF_GGRP_INT_THR); return rc; } -- 2.8.4