Using sysctl, all the subchannel information is fetched
Signed-off-by: Srikanth Kaka <srikant...@oneconvergence.com>
Signed-off-by: Vag Singh <vag.si...@oneconvergence.com>
Signed-off-by: Anand Thulasiram <av...@juniper.net>
---
drivers/bus/vmbus/freebsd/vmbus_uio.c | 85 +++++++++++++++++++++++++++
1 file changed, 85 insertions(+)
diff --git a/drivers/bus/vmbus/freebsd/vmbus_uio.c
b/drivers/bus/vmbus/freebsd/vmbus_uio.c
index affc0a3f4f..ca6f5fac59 100644
--- a/drivers/bus/vmbus/freebsd/vmbus_uio.c
+++ b/drivers/bus/vmbus/freebsd/vmbus_uio.c
@@ -308,6 +308,91 @@ bool vmbus_uio_subchannels_supported(const struct
rte_vmbus_device *dev,
return true;
}
+static bool vmbus_isnew_subchannel(struct vmbus_channel *primary,
+ uint16_t id)
+{
+ const struct vmbus_channel *c;
+
+ STAILQ_FOREACH(c, &primary->subchannel_list, next) {
+ if (c->relid == id)
+ return false;
+ }
+ return true;
+}
+
+int vmbus_uio_get_subchan(struct vmbus_channel *primary,
+ struct vmbus_channel **subchan)
+{
+ const struct rte_vmbus_device *dev = primary->device;
+ char sysctlBuffer[PATH_MAX], sysctlVar[PATH_MAX];
+ size_t len = PATH_MAX, sysctl_len;
+ /* nr_schan, relid, subid & monid datatype must match kernel's for
sysctl */
+ uint32_t relid, subid, nr_schan, i;
+ uint8_t monid;
+ int err;
+
+ /* get no. of sub-channels opened by hv_uio
+ * dev.hv_uio.0.subchan_cnt
+ */
+ snprintf(sysctlVar, len, "dev.%s.%d.subchan_cnt", driver_name,
+ dev->uio_num);
+ sysctl_len = sizeof(nr_schan);
+ if (sysctlbyname(sysctlVar, &nr_schan, &sysctl_len, NULL, 0) < 0) {
+ VMBUS_LOG(ERR, "could not read %s : %s", sysctlVar,
+ strerror(errno));
+ return -1;
+ }
+
+ /* dev.hv_uio.0.channel.14.sub */
+ snprintf(sysctlBuffer, len, "dev.%s.%d.channel.%u.sub", driver_name,
+ dev->uio_num, primary->relid);
+ for (i = 1; i <= nr_schan; i++) {
+ /* get relid */
+ snprintf(sysctlVar, len, "%s.%u.chanid", sysctlBuffer, i);
+ sysctl_len = sizeof(relid);
+ if (sysctlbyname(sysctlVar, &relid, &sysctl_len, NULL, 0) < 0) {
+ VMBUS_LOG(ERR, "could not read %s : %s", sysctlVar,
+ strerror(errno));
+ goto error;
+ }
+
+ if (!vmbus_isnew_subchannel(primary, (uint16_t)relid)) {
+ VMBUS_LOG(DEBUG, "skip already found channel: %u",
+ relid);
+ continue;
+ }
+
+ /* get sub-channel id */
+ snprintf(sysctlVar, len, "%s.%u.ch_subidx", sysctlBuffer, i);
+ sysctl_len = sizeof(subid);
+ if (sysctlbyname(sysctlVar, &subid, &sysctl_len, NULL, 0) < 0) {
+ VMBUS_LOG(ERR, "could not read %s : %s", sysctlVar,
+ strerror(errno));
+ goto error;
+ }
+
+ /* get monitor id */
+ snprintf(sysctlVar, len, "%s.%u.monitor_id", sysctlBuffer, i);
+ sysctl_len = sizeof(monid);
+ if (sysctlbyname(sysctlVar, &monid, &sysctl_len, NULL, 0) < 0) {
+ VMBUS_LOG(ERR, "could not read %s : %s", sysctlVar,
+ strerror(errno));
+ goto error;
+ }
+
+ err = vmbus_chan_create(dev, (uint16_t)relid, (uint16_t)subid,
+ monid, subchan);
+ if (err) {
+ VMBUS_LOG(ERR, "subchannel setup failed");
+ return err;
+ }
+ break;
+ }
+ return 0;
+error:
+ return -1;
+}
+
int vmbus_uio_subchan_open(struct rte_vmbus_device *dev, uint32_t subchan)
{
struct mapped_vmbus_resource *uio_res;
--
2.30.2
