This patch add a format specific information of different module eeprom.
The format support for SFP(Small Formfactor Pluggable)/SFP+
/QSFP+(Quad Small Formfactor Pluggable)/QSFP28 modules based on
SFF(Small Form Factor) Committee specifications
SFF-8079/SFF-8472/SFF-8024/SFF-8636.
Signed-off-by: Robin Zhang <robinx.zh...@intel.com>
---
app/test-pmd/cmdline.c | 74 +-
app/test-pmd/config.c | 24 +-
app/test-pmd/meson.build | 4 +
app/test-pmd/sff_8079.c | 376 ++++++++++
app/test-pmd/sff_8472.c | 281 ++++++++
app/test-pmd/sff_8636.c | 742 ++++++++++++++++++++
app/test-pmd/sff_8636.h | 592 ++++++++++++++++
app/test-pmd/sff_common.c | 296 ++++++++
app/test-pmd/sff_common.h | 178 +++++
app/test-pmd/testpmd.h | 13 +-
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 11 +-
11 files changed, 2575 insertions(+), 16 deletions(-)
create mode 100644 app/test-pmd/sff_8079.c
create mode 100644 app/test-pmd/sff_8472.c
create mode 100644 app/test-pmd/sff_8636.c
create mode 100644 app/test-pmd/sff_8636.h
create mode 100644 app/test-pmd/sff_common.c
create mode 100644 app/test-pmd/sff_common.h
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index b4ba8da2b0..d4f0bb8d64 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -166,8 +166,12 @@ static void cmd_help_long_parsed(void *parsed_result,
"show port info (port_id) representor\n"
" Show supported representors for a specific
port\n\n"
- "show port port_id (module_eeprom|eeprom)\n"
- " Display the module EEPROM or EEPROM information
for port_id.\n\n"
+ "show port port_id eeprom\n"
+ " Display the EEPROM raw data for port_id.\n\n"
+
+ "show port port_id module_eeprom (format|hex)\n"
+ " Display the module EEPROM information for port_id"
+ " with specific format or hex dump.\n\n"
"show port X rss reta (size) (mask0,mask1,...)\n"
" Display the rss redirection table entry indicated"
@@ -8393,12 +8397,12 @@ cmdline_parse_inst_t cmd_showdevice = {
},
};
-/* *** SHOW MODULE EEPROM/EEPROM port INFO *** */
+/* *** SHOW EEPROM port INFO *** */
struct cmd_showeeprom_result {
cmdline_fixed_string_t show;
cmdline_fixed_string_t port;
uint16_t portnum;
- cmdline_fixed_string_t type;
+ cmdline_fixed_string_t keyword;
};
static void cmd_showeeprom_parsed(void *parsed_result,
@@ -8407,10 +8411,8 @@ static void cmd_showeeprom_parsed(void *parsed_result,
{
struct cmd_showeeprom_result *res = parsed_result;
- if (!strcmp(res->type, "eeprom"))
+ if (!strcmp(res->keyword, "eeprom"))
port_eeprom_display(res->portnum);
- else if (!strcmp(res->type, "module_eeprom"))
- port_module_eeprom_display(res->portnum);
else
fprintf(stderr, "Unknown argument\n");
}
@@ -8422,18 +8424,67 @@ cmdline_parse_token_string_t cmd_showeeprom_port =
cmdline_parse_token_num_t cmd_showeeprom_portnum =
TOKEN_NUM_INITIALIZER(struct cmd_showeeprom_result, portnum,
RTE_UINT16);
-cmdline_parse_token_string_t cmd_showeeprom_type =
- TOKEN_STRING_INITIALIZER(struct cmd_showeeprom_result, type,
"module_eeprom#eeprom");
+cmdline_parse_token_string_t cmd_showeeprom_keyword =
+ TOKEN_STRING_INITIALIZER(struct cmd_showeeprom_result, keyword,
"eeprom");
cmdline_parse_inst_t cmd_showeeprom = {
.f = cmd_showeeprom_parsed,
.data = NULL,
- .help_str = "show port <port_id> module_eeprom|eeprom",
+ .help_str = "show port <port_id> eeprom",
.tokens = {
(void *)&cmd_showeeprom_show,
(void *)&cmd_showeeprom_port,
(void *)&cmd_showeeprom_portnum,
- (void *)&cmd_showeeprom_type,
+ (void *)&cmd_showeeprom_keyword,
+ NULL,
+ },
+};
+
+/* *** SHOW MODULE EEPROM port INFO *** */
+struct cmd_show_module_eeprom_result {
+ cmdline_fixed_string_t show;
+ cmdline_fixed_string_t port;
+ uint16_t portnum;
+ cmdline_fixed_string_t keyword;
+ cmdline_fixed_string_t type;
+};
+
+static void cmd_show_module_eeprom_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ __rte_unused void *data)
+{
+ struct cmd_show_module_eeprom_result *res = parsed_result;
+
+ if (!strcmp(res->type, "format"))
+ port_module_eeprom_display(res->portnum, 0);
+ else if (!strcmp(res->type, "hex"))
+ port_module_eeprom_display(res->portnum, 1);
+ else
+ fprintf(stderr, "Unknown argument\n");
+}
+
+cmdline_parse_token_string_t cmd_show_module_eeprom_show =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_module_eeprom_result, show,
"show");
+cmdline_parse_token_string_t cmd_show_module_eeprom_port =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_module_eeprom_result, port,
"port");
+cmdline_parse_token_num_t cmd_show_module_eeprom_portnum =
+ TOKEN_NUM_INITIALIZER(struct cmd_show_module_eeprom_result, portnum,
+ RTE_UINT16);
+cmdline_parse_token_string_t cmd_show_module_eeprom_keyword =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_module_eeprom_result, keyword,
"module_eeprom");
+cmdline_parse_token_string_t cmd_show_module_eeprom_type =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_module_eeprom_result, type,
"format#hex");
+
+cmdline_parse_inst_t cmd_show_module_eeprom = {
+ .f = cmd_show_module_eeprom_parsed,
+ .data = NULL,
+ .help_str = "show port <port_id> module_eeprom format|hex",
+ .tokens = {
+ (void *)&cmd_show_module_eeprom_show,
+ (void *)&cmd_show_module_eeprom_port,
+ (void *)&cmd_show_module_eeprom_portnum,
+ (void *)&cmd_show_module_eeprom_keyword,
+ (void *)&cmd_show_module_eeprom_type,
NULL,
},
};
@@ -17817,6 +17868,7 @@ cmdline_parse_ctx_t main_ctx[] = {
(cmdline_parse_inst_t *)&cmd_showport,
(cmdline_parse_inst_t *)&cmd_showqueue,
(cmdline_parse_inst_t *)&cmd_showeeprom,
+ (cmdline_parse_inst_t *)&cmd_show_module_eeprom,
(cmdline_parse_inst_t *)&cmd_showportall,
(cmdline_parse_inst_t *)&cmd_representor_info,
(cmdline_parse_inst_t *)&cmd_showdevice,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index de1ec14bc7..6775c05cb1 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -948,7 +948,7 @@ port_eeprom_display(portid_t port_id)
}
void
-port_module_eeprom_display(portid_t port_id)
+port_module_eeprom_display(portid_t port_id, uint8_t hex_on)
{
struct rte_eth_dev_module_info minfo;
struct rte_dev_eeprom_info einfo;
@@ -1011,7 +1011,27 @@ port_module_eeprom_display(portid_t port_id)
return;
}
- rte_hexdump(stdout, "hexdump", einfo.data, einfo.length);
+ if (hex_on)
+ rte_hexdump(stdout, "hexdump", einfo.data, einfo.length);
+ else {
+ switch (minfo.type) {
+ case RTE_ETH_MODULE_SFF_8079:
+ sff_8079_show_all(einfo.data);
+ break;
+ case RTE_ETH_MODULE_SFF_8472:
+ sff_8079_show_all(einfo.data);
+ sff_8472_show_all(einfo.data);
+ break;
+ case RTE_ETH_MODULE_SFF_8436:
+ case RTE_ETH_MODULE_SFF_8636:
+ sff_8636_show_all(einfo.data, einfo.length);
+ break;
+ default:
+ printf("Unsupported plug in module, show hex dump.\n");
+ rte_hexdump(stdout, "hexdump", einfo.data,
einfo.length);
+ break;
+ }
+ }
printf("Finish -- Port: %d MODULE EEPROM length: %d bytes\n", port_id,
einfo.length);
free(einfo.data);
}
diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build
index 43130c8856..733e5d70c5 100644
--- a/app/test-pmd/meson.build
+++ b/app/test-pmd/meson.build
@@ -22,6 +22,10 @@ sources = files(
'noisy_vnf.c',
'parameters.c',
'rxonly.c',
+ 'sff_8079.c',
+ 'sff_8472.c',
+ 'sff_8636.c',
+ 'sff_common.c',
'shared_rxq_fwd.c',
'testpmd.c',
'txonly.c',
diff --git a/app/test-pmd/sff_8079.c b/app/test-pmd/sff_8079.c
new file mode 100644
index 0000000000..0f8652543b
--- /dev/null
+++ b/app/test-pmd/sff_8079.c
@@ -0,0 +1,376 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2022 Intel Corporation
+ *
+ * Implements SFF-8079 optics diagnostics.
+ *
+ */
+
+#include <stdio.h>
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+#include <rte_flow.h>
+#include "testpmd.h"
+#include "sff_common.h"
+
+static void sff_8079_show_identifier(const uint8_t *id)
+{
+ sff_8024_show_identifier(id, 0);
+}
+
+static void sff_8079_show_ext_identifier(const uint8_t *id)
+{
+ printf("%-41s : 0x%02x", "Extended identifier", id[1]);
+ if (id[1] == 0x00)
+ printf(" (GBIC not specified / not MOD_DEF compliant)\n");
+ else if (id[1] == 0x04)
+ printf(" (GBIC/SFP defined by 2-wire interface ID)\n");
+ else if (id[1] <= 0x07)
+ printf(" (GBIC compliant with MOD_DEF %u)\n", id[1]);
+ else
+ printf(" (unknown)\n");
+}
+
+static void sff_8079_show_connector(const uint8_t *id)
+{
+ sff_8024_show_connector(id, 2);
+}
+
+static void sff_8079_show_transceiver(const uint8_t *id)
+{
+ static const char *pfx =
+ "Transceiver type :";
+
+ printf("%-41s : 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x
0x%02x\n",
+ "Transceiver codes",
+ id[3], id[4], id[5], id[6],
+ id[7], id[8], id[9], id[10], id[36]);
+ /* 10G Ethernet Compliance Codes */
+ if (id[3] & (1 << 7))
+ printf("%s 10G Ethernet: 10G Base-ER [SFF-8472 rev10.4
onwards]\n", pfx);
+ if (id[3] & (1 << 6))
+ printf("%s 10G Ethernet: 10G Base-LRM\n", pfx);
+ if (id[3] & (1 << 5))
+ printf("%s 10G Ethernet: 10G Base-LR\n", pfx);
+ if (id[3] & (1 << 4))
+ printf("%s 10G Ethernet: 10G Base-SR\n", pfx);
+ /* Infiniband Compliance Codes */
+ if (id[3] & (1 << 3))
+ printf("%s Infiniband: 1X SX\n", pfx);
+ if (id[3] & (1 << 2))
+ printf("%s Infiniband: 1X LX\n", pfx);
+ if (id[3] & (1 << 1))
+ printf("%s Infiniband: 1X Copper Active\n", pfx);
+ if (id[3] & (1 << 0))
+ printf("%s Infiniband: 1X Copper Passive\n", pfx);
+ /* ESCON Compliance Codes */
+ if (id[4] & (1 << 7))
+ printf("%s ESCON: ESCON MMF, 1310nm LED\n", pfx);
+ if (id[4] & (1 << 6))
+ printf("%s ESCON: ESCON SMF, 1310nm Laser\n", pfx);
+ /* SONET Compliance Codes */
+ if (id[4] & (1 << 5))
+ printf("%s SONET: OC-192, short reach\n", pfx);
+ if (id[4] & (1 << 4))
+ printf("%s SONET: SONET reach specifier bit 1\n", pfx);
+ if (id[4] & (1 << 3))
+ printf("%s SONET: SONET reach specifier bit 2\n", pfx);
+ if (id[4] & (1 << 2))
+ printf("%s SONET: OC-48, long reach\n", pfx);
+ if (id[4] & (1 << 1))
+ printf("%s SONET: OC-48, intermediate reach\n", pfx);
+ if (id[4] & (1 << 0))
+ printf("%s SONET: OC-48, short reach\n", pfx);
+ if (id[5] & (1 << 6))
+ printf("%s SONET: OC-12, single mode, long reach\n", pfx);
+ if (id[5] & (1 << 5))
+ printf("%s SONET: OC-12, single mode, inter. reach\n", pfx);
+ if (id[5] & (1 << 4))
+ printf("%s SONET: OC-12, short reach\n", pfx);
+ if (id[5] & (1 << 2))
+ printf("%s SONET: OC-3, single mode, long reach\n", pfx);
+ if (id[5] & (1 << 1))
+ printf("%s SONET: OC-3, single mode, inter. reach\n", pfx);
+ if (id[5] & (1 << 0))
+ printf("%s SONET: OC-3, short reach\n", pfx);
+ /* Ethernet Compliance Codes */
+ if (id[6] & (1 << 7))
+ printf("%s Ethernet: BASE-PX\n", pfx);
+ if (id[6] & (1 << 6))
+ printf("%s Ethernet: BASE-BX10\n", pfx);
+ if (id[6] & (1 << 5))
+ printf("%s Ethernet: 100BASE-FX\n", pfx);
+ if (id[6] & (1 << 4))
+ printf("%s Ethernet: 100BASE-LX/LX10\n", pfx);
+ if (id[6] & (1 << 3))
+ printf("%s Ethernet: 1000BASE-T\n", pfx);
+ if (id[6] & (1 << 2))
+ printf("%s Ethernet: 1000BASE-CX\n", pfx);
+ if (id[6] & (1 << 1))
+ printf("%s Ethernet: 1000BASE-LX\n", pfx);
+ if (id[6] & (1 << 0))
+ printf("%s Ethernet: 1000BASE-SX\n", pfx);
+ /* Fibre Channel link length */
+ if (id[7] & (1 << 7))
+ printf("%s FC: very long distance (V)\n", pfx);
+ if (id[7] & (1 << 6))
+ printf("%s FC: short distance (S)\n", pfx);
+ if (id[7] & (1 << 5))
+ printf("%s FC: intermediate distance (I)\n", pfx);
+ if (id[7] & (1 << 4))
+ printf("%s FC: long distance (L)\n", pfx);
+ if (id[7] & (1 << 3))
+ printf("%s FC: medium distance (M)\n", pfx);
+ /* Fibre Channel transmitter technology */
+ if (id[7] & (1 << 2))
+ printf("%s FC: Shortwave laser, linear Rx (SA)\n", pfx);
+ if (id[7] & (1 << 1))
+ printf("%s FC: Longwave laser (LC)\n", pfx);
+ if (id[7] & (1 << 0))
+ printf("%s FC: Electrical inter-enclosure (EL)\n", pfx);
+ if (id[8] & (1 << 7))
+ printf("%s FC: Electrical intra-enclosure (EL)\n", pfx);
+ if (id[8] & (1 << 6))
+ printf("%s FC: Shortwave laser w/o OFC (SN)\n", pfx);
+ if (id[8] & (1 << 5))
+ printf("%s FC: Shortwave laser with OFC (SL)\n", pfx);
+ if (id[8] & (1 << 4))
+ printf("%s FC: Longwave laser (LL)\n", pfx);
+ if (id[8] & (1 << 3))
+ printf("%s Active Cable\n", pfx);
+ if (id[8] & (1 << 2))
+ printf("%s Passive Cable\n", pfx);
+ if (id[8] & (1 << 1))
+ printf("%s FC: Copper FC-BaseT\n", pfx);
+ /* Fibre Channel transmission media */
+ if (id[9] & (1 << 7))
+ printf("%s FC: Twin Axial Pair (TW)\n", pfx);
+ if (id[9] & (1 << 6))
+ printf("%s FC: Twisted Pair (TP)\n", pfx);
+ if (id[9] & (1 << 5))
+ printf("%s FC: Miniature Coax (MI)\n", pfx);
+ if (id[9] & (1 << 4))
+ printf("%s FC: Video Coax (TV)\n", pfx);
+ if (id[9] & (1 << 3))
+ printf("%s FC: Multimode, 62.5um (M6)\n", pfx);
+ if (id[9] & (1 << 2))
+ printf("%s FC: Multimode, 50um (M5)\n", pfx);
+ if (id[9] & (1 << 0))
+ printf("%s FC: Single Mode (SM)\n", pfx);
+ /* Fibre Channel speed */
+ if (id[10] & (1 << 7))
+ printf("%s FC: 1200 MBytes/sec\n", pfx);
+ if (id[10] & (1 << 6))
+ printf("%s FC: 800 MBytes/sec\n", pfx);
+ if (id[10] & (1 << 4))
+ printf("%s FC: 400 MBytes/sec\n", pfx);
+ if (id[10] & (1 << 2))
+ printf("%s FC: 200 MBytes/sec\n", pfx);
+ if (id[10] & (1 << 0))
+ printf("%s FC: 100 MBytes/sec\n", pfx);
+ /* Extended Specification Compliance Codes from SFF-8024 */
+ if (id[36] == 0x1)
+ printf("%s Extended: 100G AOC or 25GAUI C2M AOC with worst BER
of 5x10^(-5)\n",
+ pfx);
+ if (id[36] == 0x2)
+ printf("%s Extended: 100G Base-SR4 or 25GBase-SR\n", pfx);
+ if (id[36] == 0x3)
+ printf("%s Extended: 100G Base-LR4 or 25GBase-LR\n", pfx);
+ if (id[36] == 0x4)
+ printf("%s Extended: 100G Base-ER4 or 25GBase-ER\n", pfx);
+ if (id[36] == 0x8)
+ printf("%s Extended: 100G ACC or 25GAUI C2M ACC with worst BER
of 5x10^(-5)\n",
+ pfx);
+ if (id[36] == 0xb)
+ printf("%s Extended: 100G Base-CR4 or 25G Base-CR CA-L\n", pfx);
+ if (id[36] == 0xc)
+ printf("%s Extended: 25G Base-CR CA-S\n", pfx);
+ if (id[36] == 0xd)
+ printf("%s Extended: 25G Base-CR CA-N\n", pfx);
+ if (id[36] == 0x16)
+ printf("%s Extended: 10Gbase-T with SFI electrical
interface\n", pfx);
+ if (id[36] == 0x18)
+ printf("%s Extended: 100G AOC or 25GAUI C2M AOC with worst BER
of 10^(-12)\n",
+ pfx);
+ if (id[36] == 0x19)
+ printf("%s Extended: 100G ACC or 25GAUI C2M ACC with worst BER
of 10^(-12)\n",
+ pfx);
+ if (id[36] == 0x1c)
+ printf("%s Extended: 10Gbase-T Short Reach\n", pfx);
+}
+
+static void sff_8079_show_encoding(const uint8_t *id)
+{
+ sff_8024_show_encoding(id, 11, RTE_ETH_MODULE_SFF_8472);
+}
+
+static void sff_8079_show_rate_identifier(const uint8_t *id)
+{
+ printf("%-41s : 0x%02x", "Rate identifier", id[13]);
+ switch (id[13]) {
+ case 0x00:
+ printf(" (unspecified)\n");
+ break;
+ case 0x01:
+ printf(" (4/2/1G Rate_Select & AS0/AS1)\n");
+ break;
+ case 0x02:
+ printf(" (8/4/2G Rx Rate_Select only)\n");
+ break;
+ case 0x03:
+ printf(" (8/4/2G Independent Rx & Tx Rate_Select)\n");
+ break;
+ case 0x04:
+ printf(" (8/4/2G Tx Rate_Select only)\n");
+ break;
+ default:
+ printf(" (reserved or unknown)\n");
+ break;
+ }
+}
+
+static void sff_8079_show_oui(const uint8_t *id)
+{
+ printf("%-41s : %02x:%02x:%02x\n", "Vendor OUI",
+ id[37], id[38], id[39]);
+}
+
+static void sff_8079_show_wavelength_or_copper_compliance(const uint8_t *id)
+{
+ if (id[8] & (1 << 2)) {
+ printf("%-41s : 0x%02x", "Passive Cu cmplnce.", id[60]);
+ switch (id[60]) {
+ case 0x00:
+ printf(" (unspecified)");
+ break;
+ case 0x01:
+ printf(" (SFF-8431 appendix E)");
+ break;
+ default:
+ printf(" (unknown)");
+ break;
+ }
+ printf(" [SFF-8472 rev10.4 only]\n");
+ } else if (id[8] & (1 << 3)) {
+ printf("%-41s : 0x%02x", "Active Cu cmplnce.", id[60]);
+ switch (id[60]) {
+ case 0x00:
+ printf(" (unspecified)");
+ break;
+ case 0x01:
+ printf(" (SFF-8431 appendix E)");
+ break;
+ case 0x04:
+ printf(" (SFF-8431 limiting)");
+ break;
+ default:
+ printf(" (unknown)");
+ break;
+ }
+ printf(" [SFF-8472 rev10.4 only]\n");
+ } else {
+ printf("%-41s : %unm\n", "Laser wavelength",
+ (id[60] << 8) | id[61]);
+ }
+}
+
+static void sff_8079_show_value_with_unit(const uint8_t *id, unsigned int reg,
+ const char *name, unsigned int mult,
+ const char *unit)
+{
+ unsigned int val = id[reg];
+
+ printf("%-41s : %u%s\n", name, val * mult, unit);
+}
+
+static void sff_8079_show_ascii(const uint8_t *id, unsigned int first_reg,
+ unsigned int last_reg, const char *name)
+{
+ unsigned int reg, val;
+
+ printf("%-41s : ", name);
+ while (first_reg <= last_reg && id[last_reg] == ' ')
+ last_reg--;
+ for (reg = first_reg; reg <= last_reg; reg++) {
+ val = id[reg];
+ putchar(((val >= 32) && (val <= 126)) ? val : '_');
+ }
+ printf("\n");
+}
+
+static void sff_8079_show_options(const uint8_t *id)
+{
+ static const char *pfx =
+ "Option :";
+
+ printf("%-41s : 0x%02x 0x%02x\n", "Option values", id[64], id[65]);
+ if (id[65] & (1 << 1))
+ printf("%s RX_LOS implemented\n", pfx);
+ if (id[65] & (1 << 2))
+ printf("%s RX_LOS implemented, inverted\n", pfx);
+ if (id[65] & (1 << 3))
+ printf("%s TX_FAULT implemented\n", pfx);
+ if (id[65] & (1 << 4))
+ printf("%s TX_DISABLE implemented\n", pfx);
+ if (id[65] & (1 << 5))
+ printf("%s RATE_SELECT implemented\n", pfx);
+ if (id[65] & (1 << 6))
+ printf("%s Tunable transmitter technology\n", pfx);
+ if (id[65] & (1 << 7))
+ printf("%s Receiver decision threshold implemented\n", pfx);
+ if (id[64] & (1 << 0))
+ printf("%s Linear receiver output implemented\n", pfx);
+ if (id[64] & (1 << 1))
+ printf("%s Power level 2 requirement\n", pfx);
+ if (id[64] & (1 << 2))
+ printf("%s Cooled transceiver implemented\n", pfx);
+ if (id[64] & (1 << 3))
+ printf("%s Retimer or CDR implemented\n", pfx);
+ if (id[64] & (1 << 4))
+ printf("%s Paging implemented\n", pfx);
+ if (id[64] & (1 << 5))
+ printf("%s Power level 3 requirement\n", pfx);
+}
+
+void sff_8079_show_all(const uint8_t *id)
+{
+ sff_8079_show_identifier(id);
+ if (((id[0] == 0x02) || (id[0] == 0x03)) && (id[1] == 0x04)) {
+ unsigned int br_nom, br_min, br_max;
+
+ if (id[12] == 0) {
+ br_nom = br_min = br_max = 0;
+ } else if (id[12] == 255) {
+ br_nom = id[66] * 250;
+ br_max = id[67];
+ br_min = id[67];
+ } else {
+ br_nom = id[12] * 100;
+ br_max = id[66];
+ br_min = id[67];
+ }
+ sff_8079_show_ext_identifier(id);
+ sff_8079_show_connector(id);
+ sff_8079_show_transceiver(id);
+ sff_8079_show_encoding(id);
+ printf("%-41s : %u%s\n", "BR, Nominal", br_nom, "MBd");
+ sff_8079_show_rate_identifier(id);
+ sff_8079_show_value_with_unit(id, 14,
+ "Length (SMF,km)", 1, "km");
+ sff_8079_show_value_with_unit(id, 15, "Length (SMF)", 100, "m");
+ sff_8079_show_value_with_unit(id, 16, "Length (50um)", 10, "m");
+ sff_8079_show_value_with_unit(id, 17,
+ "Length (62.5um)", 10, "m");
+ sff_8079_show_value_with_unit(id, 18, "Length (Copper)", 1,
"m");
+ sff_8079_show_value_with_unit(id, 19, "Length (OM3)", 10, "m");
+ sff_8079_show_wavelength_or_copper_compliance(id);
+ sff_8079_show_ascii(id, 20, 35, "Vendor name");
+ sff_8079_show_oui(id);
+ sff_8079_show_ascii(id, 40, 55, "Vendor PN");
+ sff_8079_show_ascii(id, 56, 59, "Vendor rev");
+ sff_8079_show_options(id);
+ printf("%-41s : %u%s\n", "BR margin, max", br_max, "%");
+ printf("%-41s : %u%s\n", "BR margin, min", br_min, "%");
+ sff_8079_show_ascii(id, 68, 83, "Vendor SN");
+ sff_8079_show_ascii(id, 84, 91, "Date code");
+ }
+}
diff --git a/app/test-pmd/sff_8472.c b/app/test-pmd/sff_8472.c
new file mode 100644
index 0000000000..a419d1df78
--- /dev/null
+++ b/app/test-pmd/sff_8472.c
@@ -0,0 +1,281 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2022 Intel Corporation
+ *
+ * Implements SFF-8472 optics diagnostics.
+ *
+ */
+
+#include <stdio.h>
+#include <math.h>
+#include <arpa/inet.h>
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+#include <rte_flow.h>
+#include "testpmd.h"
+#include "sff_common.h"
+
+/* Offsets in decimal, for direct comparison with the SFF specs */
+
+/* A0-based EEPROM offsets for DOM support checks */
+#define SFF_A0_DOM 92
+#define SFF_A0_OPTIONS 93
+#define SFF_A0_COMP 94
+
+/* EEPROM bit values for various registers */
+#define SFF_A0_DOM_EXTCAL (1 << 4)
+#define SFF_A0_DOM_INTCAL (1 << 5)
+#define SFF_A0_DOM_IMPL (1 << 6)
+#define SFF_A0_DOM_PWRT (1 << 3)
+
+#define SFF_A0_OPTIONS_AW (1 << 7)
+
+/*
+ * See ethtool.c comments about SFF-8472, this is the offset
+ * at which the A2 page is in the EEPROM blob returned by the
+ * kernel.
+ */
+#define SFF_A2_BASE 0x100
+
+/* A2-based offsets for DOM */
+#define SFF_A2_TEMP 96
+#define SFF_A2_TEMP_HALRM 0
+#define SFF_A2_TEMP_LALRM 2
+#define SFF_A2_TEMP_HWARN 4
+#define SFF_A2_TEMP_LWARN 6
+
+#define SFF_A2_VCC 98
+#define SFF_A2_VCC_HALRM 8
+#define SFF_A2_VCC_LALRM 10
+#define SFF_A2_VCC_HWARN 12
+#define SFF_A2_VCC_LWARN 14
+
+#define SFF_A2_BIAS 100
+#define SFF_A2_BIAS_HALRM 16
+#define SFF_A2_BIAS_LALRM 18
+#define SFF_A2_BIAS_HWARN 20
+#define SFF_A2_BIAS_LWARN 22
+
+#define SFF_A2_TX_PWR 102
+#define SFF_A2_TX_PWR_HALRM 24
+#define SFF_A2_TX_PWR_LALRM 26
+#define SFF_A2_TX_PWR_HWARN 28
+#define SFF_A2_TX_PWR_LWARN 30
+
+#define SFF_A2_RX_PWR 104
+#define SFF_A2_RX_PWR_HALRM 32
+#define SFF_A2_RX_PWR_LALRM 34
+#define SFF_A2_RX_PWR_HWARN 36
+#define SFF_A2_RX_PWR_LWARN 38
+
+#define SFF_A2_ALRM_FLG 112
+#define SFF_A2_WARN_FLG 116
+
+/* 32-bit little-endian calibration constants */
+#define SFF_A2_CAL_RXPWR4 56
+#define SFF_A2_CAL_RXPWR3 60
+#define SFF_A2_CAL_RXPWR2 64
+#define SFF_A2_CAL_RXPWR1 68
+#define SFF_A2_CAL_RXPWR0 72
+
+/* 16-bit little endian calibration constants */
+#define SFF_A2_CAL_TXI_SLP 76
+#define SFF_A2_CAL_TXI_OFF 78
+#define SFF_A2_CAL_TXPWR_SLP 80
+#define SFF_A2_CAL_TXPWR_OFF 82
+#define SFF_A2_CAL_T_SLP 84
+#define SFF_A2_CAL_T_OFF 86
+#define SFF_A2_CAL_V_SLP 88
+#define SFF_A2_CAL_V_OFF 90
+
+static struct sff_8472_aw_flags {
+ const char *str; /* Human-readable string, null at the end */
+ int offset; /* A2-relative address offset */
+ uint8_t value; /* Alarm is on if (offset & value) != 0. */
+} sff_8472_aw_flags[] = {
+ { "Laser bias current high alarm", SFF_A2_ALRM_FLG, (1 << 3) },
+ { "Laser bias current low alarm", SFF_A2_ALRM_FLG, (1 << 2) },
+ { "Laser bias current high warning", SFF_A2_WARN_FLG, (1 << 3) },
+ { "Laser bias current low warning", SFF_A2_WARN_FLG, (1 << 2) },
+
+ { "Laser output power high alarm", SFF_A2_ALRM_FLG, (1 << 1) },
+ { "Laser output power low alarm", SFF_A2_ALRM_FLG, (1 << 0) },
+ { "Laser output power high warning", SFF_A2_WARN_FLG, (1 << 1) },
+ { "Laser output power low warning", SFF_A2_WARN_FLG, (1 << 0) },
+
+ { "Module temperature high alarm", SFF_A2_ALRM_FLG, (1 << 7) },
+ { "Module temperature low alarm", SFF_A2_ALRM_FLG, (1 << 6) },
+ { "Module temperature high warning", SFF_A2_WARN_FLG, (1 << 7) },
+ { "Module temperature low warning", SFF_A2_WARN_FLG, (1 << 6) },
+
+ { "Module voltage high alarm", SFF_A2_ALRM_FLG, (1 << 5) },
+ { "Module voltage low alarm", SFF_A2_ALRM_FLG, (1 << 4) },
+ { "Module voltage high warning", SFF_A2_WARN_FLG, (1 << 5) },
+ { "Module voltage low warning", SFF_A2_WARN_FLG, (1 << 4) },
+
+ { "Laser rx power high alarm", SFF_A2_ALRM_FLG + 1, (1 << 7) },
+ { "Laser rx power low alarm", SFF_A2_ALRM_FLG + 1, (1 << 6) },
+ { "Laser rx power high warning", SFF_A2_WARN_FLG + 1, (1 << 7) },
+ { "Laser rx power low warning", SFF_A2_WARN_FLG + 1, (1 << 6) },
+
+ { NULL, 0, 0 },
+};
+
+/* Most common case: 16-bit unsigned integer in a certain unit */
+#define A2_OFFSET_TO_U16(offset) \
+ (id[SFF_A2_BASE + (offset)] << 8 | id[SFF_A2_BASE + (offset) + 1])
+
+/* Calibration slope is a number between 0.0 included and 256.0 excluded. */
+#define A2_OFFSET_TO_SLP(offset) \
+ (id[SFF_A2_BASE + (offset)] + id[SFF_A2_BASE + (offset) + 1] / 256.)
+
+/* Calibration offset is an integer from -32768 to 32767 */
+#define A2_OFFSET_TO_OFF(offset) \
+ ((int16_t)A2_OFFSET_TO_U16(offset))
+
+/* RXPWR(x) are IEEE-754 floating point numbers in big-endian format */
+#define A2_OFFSET_TO_RXPWRx(offset) \
+ (befloattoh((const uint32_t *)(id + SFF_A2_BASE + (offset))))
+
+/*
+ * 2-byte internal temperature conversions:
+ * First byte is a signed 8-bit integer, which is the temp decimal part
+ * Second byte are 1/256th of degree, which are added to the dec part.
+ */
+#define A2_OFFSET_TO_TEMP(offset) ((int16_t)A2_OFFSET_TO_U16(offset))
+
+static void sff_8472_dom_parse(const uint8_t *id, struct sff_diags *sd)
+{
+ sd->bias_cur[MCURR] = A2_OFFSET_TO_U16(SFF_A2_BIAS);
+ sd->bias_cur[HALRM] = A2_OFFSET_TO_U16(SFF_A2_BIAS_HALRM);
+ sd->bias_cur[LALRM] = A2_OFFSET_TO_U16(SFF_A2_BIAS_LALRM);
+ sd->bias_cur[HWARN] = A2_OFFSET_TO_U16(SFF_A2_BIAS_HWARN);
+ sd->bias_cur[LWARN] = A2_OFFSET_TO_U16(SFF_A2_BIAS_LWARN);
+
+ sd->sfp_voltage[MCURR] = A2_OFFSET_TO_U16(SFF_A2_VCC);
+ sd->sfp_voltage[HALRM] = A2_OFFSET_TO_U16(SFF_A2_VCC_HALRM);
+ sd->sfp_voltage[LALRM] = A2_OFFSET_TO_U16(SFF_A2_VCC_LALRM);
+ sd->sfp_voltage[HWARN] = A2_OFFSET_TO_U16(SFF_A2_VCC_HWARN);
+ sd->sfp_voltage[LWARN] = A2_OFFSET_TO_U16(SFF_A2_VCC_LWARN);
+
+ sd->tx_power[MCURR] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR);
+ sd->tx_power[HALRM] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_HALRM);
+ sd->tx_power[LALRM] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_LALRM);
+ sd->tx_power[HWARN] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_HWARN);
+ sd->tx_power[LWARN] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_LWARN);
+
+ sd->rx_power[MCURR] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR);
+ sd->rx_power[HALRM] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_HALRM);
+ sd->rx_power[LALRM] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_LALRM);
+ sd->rx_power[HWARN] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_HWARN);
+ sd->rx_power[LWARN] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_LWARN);
+
+ sd->sfp_temp[MCURR] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP);
+ sd->sfp_temp[HALRM] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_HALRM);
+ sd->sfp_temp[LALRM] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_LALRM);
+ sd->sfp_temp[HWARN] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_HWARN);
+ sd->sfp_temp[LWARN] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_LWARN);
+}
+
+/* Converts to a float from a big-endian 4-byte source buffer. */
+static float befloattoh(const uint32_t *source)
+{
+ union {
+ uint32_t src;
+ float dst;
+ } converter;
+
+ converter.src = ntohl(*source);
+ return converter.dst;
+}
+
+static void sff_8472_calibration(const uint8_t *id, struct sff_diags *sd)
+{
+ unsigned long i;
+ uint16_t rx_reading;
+
+ /* Calibration should occur for all values (threshold and current) */
+ for (i = 0; i < ARRAY_SIZE(sd->bias_cur); ++i) {
+ /*
+ * Apply calibration formula 1 (Temp., Voltage, Bias, Tx Power)
+ */
+ sd->bias_cur[i] *= A2_OFFSET_TO_SLP(SFF_A2_CAL_TXI_SLP);
+ sd->tx_power[i] *= A2_OFFSET_TO_SLP(SFF_A2_CAL_TXPWR_SLP);
+ sd->sfp_voltage[i] *= A2_OFFSET_TO_SLP(SFF_A2_CAL_V_SLP);
+ sd->sfp_temp[i] *= A2_OFFSET_TO_SLP(SFF_A2_CAL_T_SLP);
+
+ sd->bias_cur[i] += A2_OFFSET_TO_OFF(SFF_A2_CAL_TXI_OFF);
+ sd->tx_power[i] += A2_OFFSET_TO_OFF(SFF_A2_CAL_TXPWR_OFF);
+ sd->sfp_voltage[i] += A2_OFFSET_TO_OFF(SFF_A2_CAL_V_OFF);
+ sd->sfp_temp[i] += A2_OFFSET_TO_OFF(SFF_A2_CAL_T_OFF);
+
+ /*
+ * Apply calibration formula 2 (Rx Power only)
+ */
+ rx_reading = sd->rx_power[i];
+ sd->rx_power[i] = A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR0);
+ sd->rx_power[i] += rx_reading *
+ A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR1);
+ sd->rx_power[i] += rx_reading *
+ A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR2);
+ sd->rx_power[i] += rx_reading *
+ A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR3);
+ }
+}
+
+static void sff_8472_parse_eeprom(const uint8_t *id, struct sff_diags *sd)
+{
+ sd->supports_dom = id[SFF_A0_DOM] & SFF_A0_DOM_IMPL;
+ sd->supports_alarms = id[SFF_A0_OPTIONS] & SFF_A0_OPTIONS_AW;
+ sd->calibrated_ext = id[SFF_A0_DOM] & SFF_A0_DOM_EXTCAL;
+ sd->rx_power_type = id[SFF_A0_DOM] & SFF_A0_DOM_PWRT;
+
+ sff_8472_dom_parse(id, sd);
+
+ /*
+ * If the SFP is externally calibrated, we need to read calibration data
+ * and compensate the already stored readings.
+ */
+ if (sd->calibrated_ext)
+ sff_8472_calibration(id, sd);
+}
+
+void sff_8472_show_all(const uint8_t *id)
+{
+ struct sff_diags sd = {0};
+ const char *rx_power_string = NULL;
+ int i;
+
+ sff_8472_parse_eeprom(id, &sd);
+
+ if (!sd.supports_dom) {
+ printf("%-41s : No\n", "Optical diagnostics support");
+ return;
+ }
+ printf("%-41s : Yes\n", "Optical diagnostics support");
+
+ PRINT_BIAS("Laser bias current", sd.bias_cur[MCURR]);
+ PRINT_xX_PWR("Laser output power", sd.tx_power[MCURR]);
+
+ if (!sd.rx_power_type)
+ rx_power_string = "Receiver signal OMA";
+ else
+ rx_power_string = "Receiver signal average optical power";
+
+ PRINT_xX_PWR(rx_power_string, sd.rx_power[MCURR]);
+
+ PRINT_TEMP("Module temperature", sd.sfp_temp[MCURR]);
+ PRINT_VCC("Module voltage", sd.sfp_voltage[MCURR]);
+
+ printf("%-41s : %s\n", "Alarm/warning flags implemented",
+ (sd.supports_alarms ? "Yes" : "No"));
+ if (sd.supports_alarms) {
+
+ for (i = 0; sff_8472_aw_flags[i].str; ++i) {
+ printf("%-41s : %s\n", sff_8472_aw_flags[i].str,
+ id[SFF_A2_BASE + sff_8472_aw_flags[i].offset]
+ & sff_8472_aw_flags[i].value ? "On" : "Off");
+ }
+ sff_show_thresholds(sd);
+ }
+}
+
diff --git a/app/test-pmd/sff_8636.c b/app/test-pmd/sff_8636.c
new file mode 100644
index 0000000000..cb57fe576c
--- /dev/null
+++ b/app/test-pmd/sff_8636.c
@@ -0,0 +1,742 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2022 Intel Corporation
+ *
+ * Implements SFF-8636 based QSFP+/QSFP28 Diagnostics Memory map.
+ *
+ */
+
+#include <stdio.h>
+#include <math.h>
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+#include <rte_flow.h>
+#include "testpmd.h"
+#include "sff_common.h"
+#include "sff_8636.h"
+
+#define MAX_DESC_SIZE 42
+
+static struct sff_8636_aw_flags {
+ const char *str; /* Human-readable string, null at the end */
+ int offset; /* A2-relative address offset */
+ uint8_t value; /* Alarm is on if (offset & value) != 0. */
+} sff_8636_aw_flags[] = {
+ { "Laser bias current high alarm (Chan 1)",
+ SFF_8636_TX_BIAS_12_AW_OFFSET, (SFF_8636_TX_BIAS_1_HALARM) },
+ { "Laser bias current low alarm (Chan 1)",
+ SFF_8636_TX_BIAS_12_AW_OFFSET, (SFF_8636_TX_BIAS_1_LALARM) },
+ { "Laser bias current high warning (Chan 1)",
+ SFF_8636_TX_BIAS_12_AW_OFFSET, (SFF_8636_TX_BIAS_1_HWARN) },
+ { "Laser bias current low warning (Chan 1)",
+ SFF_8636_TX_BIAS_12_AW_OFFSET, (SFF_8636_TX_BIAS_1_LWARN) },
+
+ { "Laser bias current high alarm (Chan 2)",
+ SFF_8636_TX_BIAS_12_AW_OFFSET, (SFF_8636_TX_BIAS_2_HALARM) },
+ { "Laser bias current low alarm (Chan 2)",
+ SFF_8636_TX_BIAS_12_AW_OFFSET, (SFF_8636_TX_BIAS_2_LALARM) },
+ { "Laser bias current high warning (Chan 2)",
+ SFF_8636_TX_BIAS_12_AW_OFFSET, (SFF_8636_TX_BIAS_2_HWARN) },
+ { "Laser bias current low warning (Chan 2)",
+ SFF_8636_TX_BIAS_12_AW_OFFSET, (SFF_8636_TX_BIAS_2_LWARN) },
+
+ { "Laser bias current high alarm (Chan 3)",
+ SFF_8636_TX_BIAS_34_AW_OFFSET, (SFF_8636_TX_BIAS_3_HALARM) },
+ { "Laser bias current low alarm (Chan 3)",
+ SFF_8636_TX_BIAS_34_AW_OFFSET, (SFF_8636_TX_BIAS_3_LALARM) },
+ { "Laser bias current high warning (Chan 3)",
+ SFF_8636_TX_BIAS_34_AW_OFFSET, (SFF_8636_TX_BIAS_3_HWARN) },
+ { "Laser bias current low warning (Chan 3)",
+ SFF_8636_TX_BIAS_34_AW_OFFSET, (SFF_8636_TX_BIAS_3_LWARN) },
+
+ { "Laser bias current high alarm (Chan 4)",
+ SFF_8636_TX_BIAS_34_AW_OFFSET, (SFF_8636_TX_BIAS_4_HALARM) },
+ { "Laser bias current low alarm (Chan 4)",
+ SFF_8636_TX_BIAS_34_AW_OFFSET, (SFF_8636_TX_BIAS_4_LALARM) },
+ { "Laser bias current high warning (Chan 4)",
+ SFF_8636_TX_BIAS_34_AW_OFFSET, (SFF_8636_TX_BIAS_4_HWARN) },
+ { "Laser bias current low warning (Chan 4)",
+ SFF_8636_TX_BIAS_34_AW_OFFSET, (SFF_8636_TX_BIAS_4_LWARN) },
+
+ { "Module temperature high alarm",
+ SFF_8636_TEMP_AW_OFFSET, (SFF_8636_TEMP_HALARM_STATUS) },
+ { "Module temperature low alarm",
+ SFF_8636_TEMP_AW_OFFSET, (SFF_8636_TEMP_LALARM_STATUS) },
+ { "Module temperature high warning",
+ SFF_8636_TEMP_AW_OFFSET, (SFF_8636_TEMP_HWARN_STATUS) },
+ { "Module temperature low warning",
+ SFF_8636_TEMP_AW_OFFSET, (SFF_8636_TEMP_LWARN_STATUS) },
+
+ { "Module voltage high alarm",
+ SFF_8636_VCC_AW_OFFSET, (SFF_8636_VCC_HALARM_STATUS) },
+ { "Module voltage low alarm",
+ SFF_8636_VCC_AW_OFFSET, (SFF_8636_VCC_LALARM_STATUS) },
+ { "Module voltage high warning",
+ SFF_8636_VCC_AW_OFFSET, (SFF_8636_VCC_HWARN_STATUS) },
+ { "Module voltage low warning",
+ SFF_8636_VCC_AW_OFFSET, (SFF_8636_VCC_LWARN_STATUS) },
+
+ { "Laser tx power high alarm (Channel 1)",
+ SFF_8636_TX_PWR_12_AW_OFFSET, (SFF_8636_TX_PWR_1_HALARM) },
+ { "Laser tx power low alarm (Channel 1)",
+ SFF_8636_TX_PWR_12_AW_OFFSET, (SFF_8636_TX_PWR_1_LALARM) },
+ { "Laser tx power high warning (Channel 1)",
+ SFF_8636_TX_PWR_12_AW_OFFSET, (SFF_8636_TX_PWR_1_HWARN) },
+ { "Laser tx power low warning (Channel 1)",
+ SFF_8636_TX_PWR_12_AW_OFFSET, (SFF_8636_TX_PWR_1_LWARN) },
+
+ { "Laser tx power high alarm (Channel 2)",
+ SFF_8636_TX_PWR_12_AW_OFFSET, (SFF_8636_TX_PWR_2_HALARM) },
+ { "Laser tx power low alarm (Channel 2)",
+ SFF_8636_TX_PWR_12_AW_OFFSET, (SFF_8636_TX_PWR_2_LALARM) },
+ { "Laser tx power high warning (Channel 2)",
+ SFF_8636_TX_PWR_12_AW_OFFSET, (SFF_8636_TX_PWR_2_HWARN) },
+ { "Laser tx power low warning (Channel 2)",
+ SFF_8636_TX_PWR_12_AW_OFFSET, (SFF_8636_TX_PWR_2_LWARN) },
+
+ { "Laser tx power high alarm (Channel 3)",
+ SFF_8636_TX_PWR_34_AW_OFFSET, (SFF_8636_TX_PWR_3_HALARM) },
+ { "Laser tx power low alarm (Channel 3)",
+ SFF_8636_TX_PWR_34_AW_OFFSET, (SFF_8636_TX_PWR_3_LALARM) },
+ { "Laser tx power high warning (Channel 3)",
+ SFF_8636_TX_PWR_34_AW_OFFSET, (SFF_8636_TX_PWR_3_HWARN) },
+ { "Laser tx power low warning (Channel 3)",
+ SFF_8636_TX_PWR_34_AW_OFFSET, (SFF_8636_TX_PWR_3_LWARN) },
+
+ { "Laser tx power high alarm (Channel 4)",
+ SFF_8636_TX_PWR_34_AW_OFFSET, (SFF_8636_TX_PWR_4_HALARM) },
+ { "Laser tx power low alarm (Channel 4)",
+ SFF_8636_TX_PWR_34_AW_OFFSET, (SFF_8636_TX_PWR_4_LALARM) },
+ { "Laser tx power high warning (Channel 4)",
+ SFF_8636_TX_PWR_34_AW_OFFSET, (SFF_8636_TX_PWR_4_HWARN) },
+ { "Laser tx power low warning (Channel 4)",
+ SFF_8636_TX_PWR_34_AW_OFFSET, (SFF_8636_TX_PWR_4_LWARN) },
+
+ { "Laser rx power high alarm (Channel 1)",
+ SFF_8636_RX_PWR_12_AW_OFFSET, (SFF_8636_RX_PWR_1_HALARM) },
+ { "Laser rx power low alarm (Channel 1)",
+ SFF_8636_RX_PWR_12_AW_OFFSET, (SFF_8636_RX_PWR_1_LALARM) },
+ { "Laser rx power high warning (Channel 1)",
+ SFF_8636_RX_PWR_12_AW_OFFSET, (SFF_8636_RX_PWR_1_HWARN) },
+ { "Laser rx power low warning (Channel 1)",
+ SFF_8636_RX_PWR_12_AW_OFFSET, (SFF_8636_RX_PWR_1_LWARN) },
+
+ { "Laser rx power high alarm (Channel 2)",
+ SFF_8636_RX_PWR_12_AW_OFFSET, (SFF_8636_RX_PWR_2_HALARM) },
+ { "Laser rx power low alarm (Channel 2)",
+ SFF_8636_RX_PWR_12_AW_OFFSET, (SFF_8636_RX_PWR_2_LALARM) },
+ { "Laser rx power high warning (Channel 2)",
+ SFF_8636_RX_PWR_12_AW_OFFSET, (SFF_8636_RX_PWR_2_HWARN) },
+ { "Laser rx power low warning (Channel 2)",
+ SFF_8636_RX_PWR_12_AW_OFFSET, (SFF_8636_RX_PWR_2_LWARN) },
+
+ { "Laser rx power high alarm (Channel 3)",
+ SFF_8636_RX_PWR_34_AW_OFFSET, (SFF_8636_RX_PWR_3_HALARM) },
+ { "Laser rx power low alarm (Channel 3)",
+ SFF_8636_RX_PWR_34_AW_OFFSET, (SFF_8636_RX_PWR_3_LALARM) },
+ { "Laser rx power high warning (Channel 3)",
+ SFF_8636_RX_PWR_34_AW_OFFSET, (SFF_8636_RX_PWR_3_HWARN) },
+ { "Laser rx power low warning (Channel 3)",
+ SFF_8636_RX_PWR_34_AW_OFFSET, (SFF_8636_RX_PWR_3_LWARN) },
+
+ { "Laser rx power high alarm (Channel 4)",
+ SFF_8636_RX_PWR_34_AW_OFFSET, (SFF_8636_RX_PWR_4_HALARM) },
+ { "Laser rx power low alarm (Channel 4)",
+ SFF_8636_RX_PWR_34_AW_OFFSET, (SFF_8636_RX_PWR_4_LALARM) },
+ { "Laser rx power high warning (Channel 4)",
+ SFF_8636_RX_PWR_34_AW_OFFSET, (SFF_8636_RX_PWR_4_HWARN) },
+ { "Laser rx power low warning (Channel 4)",
+ SFF_8636_RX_PWR_34_AW_OFFSET, (SFF_8636_RX_PWR_4_LWARN) },
+
+ { NULL, 0, 0 },
+};
+
+static void sff_8636_show_identifier(const uint8_t *id)
+{
+ sff_8024_show_identifier(id, SFF_8636_ID_OFFSET);
+}
+
+static void sff_8636_show_ext_identifier(const uint8_t *id)
+{
+ printf("%-41s : 0x%02x\n", "Extended identifier",
+ id[SFF_8636_EXT_ID_OFFSET]);
+
+ static const char *pfx =
+ "Extended identifier description :";
+
+ switch (id[SFF_8636_EXT_ID_OFFSET] & SFF_8636_EXT_ID_PWR_CLASS_MASK) {
+ case SFF_8636_EXT_ID_PWR_CLASS_1:
+ printf("%s 1.5W max. Power consumption\n", pfx);
+ break;
+ case SFF_8636_EXT_ID_PWR_CLASS_2:
+ printf("%s 2.0W max. Power consumption\n", pfx);
+ break;
+ case SFF_8636_EXT_ID_PWR_CLASS_3:
+ printf("%s 2.5W max. Power consumption\n", pfx);
+ break;
+ case SFF_8636_EXT_ID_PWR_CLASS_4:
+ printf("%s 3.5W max. Power consumption\n", pfx);
+ break;
+ }
+
+ if (id[SFF_8636_EXT_ID_OFFSET] & SFF_8636_EXT_ID_CDR_TX_MASK)
+ printf("%s CDR present in TX,", pfx);
+ else
+ printf("%s No CDR in TX,", pfx);
+
+ if (id[SFF_8636_EXT_ID_OFFSET] & SFF_8636_EXT_ID_CDR_RX_MASK)
+ printf(" CDR present in RX\n");
+ else
+ printf(" No CDR in RX\n");
+
+ switch (id[SFF_8636_EXT_ID_OFFSET] & SFF_8636_EXT_ID_EPWR_CLASS_MASK) {
+ case SFF_8636_EXT_ID_PWR_CLASS_LEGACY:
+ printf("%s", pfx);
+ break;
+ case SFF_8636_EXT_ID_PWR_CLASS_5:
+ printf("%s 4.0W max. Power consumption,", pfx);
+ break;
+ case SFF_8636_EXT_ID_PWR_CLASS_6:
+ printf("%s 4.5W max. Power consumption, ", pfx);
+ break;
+ case SFF_8636_EXT_ID_PWR_CLASS_7:
+ printf("%s 5.0W max. Power consumption, ", pfx);
+ break;
+ }
+ if (id[SFF_8636_PWR_MODE_OFFSET] & SFF_8636_HIGH_PWR_ENABLE)
+ printf(" High Power Class (> 3.5 W) enabled\n");
+ else
+ printf(" High Power Class (> 3.5 W) not enabled\n");
+}
+
+static void sff_8636_show_connector(const uint8_t *id)
+{
+ sff_8024_show_connector(id, SFF_8636_CTOR_OFFSET);
+}
+
+static void sff_8636_show_transceiver(const uint8_t *id)
+{
+ static const char *pfx =
+ "Transceiver type :";
+
+ printf("%-41s : 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x
0x%02x\n",
+ "Transceiver codes",
+ id[SFF_8636_ETHERNET_COMP_OFFSET],
+ id[SFF_8636_SONET_COMP_OFFSET],
+ id[SFF_8636_SAS_COMP_OFFSET],
+ id[SFF_8636_GIGE_COMP_OFFSET],
+ id[SFF_8636_FC_LEN_OFFSET],
+ id[SFF_8636_FC_TECH_OFFSET],
+ id[SFF_8636_FC_TRANS_MEDIA_OFFSET],
+ id[SFF_8636_FC_SPEED_OFFSET]);
+
+ /* 10G/40G Ethernet Compliance Codes */
+ if (id[SFF_8636_ETHERNET_COMP_OFFSET] & SFF_8636_ETHERNET_10G_LRM)
+ printf("%s 10G Ethernet: 10G Base-LRM\n", pfx);
+ if (id[SFF_8636_ETHERNET_COMP_OFFSET] & SFF_8636_ETHERNET_10G_LR)
+ printf("%s 10G Ethernet: 10G Base-LR\n", pfx);
+ if (id[SFF_8636_ETHERNET_COMP_OFFSET] & SFF_8636_ETHERNET_10G_SR)
+ printf("%s 10G Ethernet: 10G Base-SR\n", pfx);
+ if (id[SFF_8636_ETHERNET_COMP_OFFSET] & SFF_8636_ETHERNET_40G_CR4)
+ printf("%s 40G Ethernet: 40G Base-CR4\n", pfx);
+ if (id[SFF_8636_ETHERNET_COMP_OFFSET] & SFF_8636_ETHERNET_40G_SR4)
+ printf("%s 40G Ethernet: 40G Base-SR4\n", pfx);
+ if (id[SFF_8636_ETHERNET_COMP_OFFSET] & SFF_8636_ETHERNET_40G_LR4)
+ printf("%s 40G Ethernet: 40G Base-LR4\n", pfx);
+ if (id[SFF_8636_ETHERNET_COMP_OFFSET] & SFF_8636_ETHERNET_40G_ACTIVE)
+ printf("%s 40G Ethernet: 40G Active Cable (XLPPI)\n", pfx);
+ /* Extended Specification Compliance Codes from SFF-8024 */
+ if (id[SFF_8636_ETHERNET_COMP_OFFSET] & SFF_8636_ETHERNET_RSRVD) {
+ switch (id[SFF_8636_OPTION_1_OFFSET]) {
+ case SFF_8636_ETHERNET_UNSPECIFIED:
+ printf("%s (reserved or unknown)\n", pfx);
+ break;
+ case SFF_8636_ETHERNET_100G_AOC:
+ printf("%s 100G Ethernet: 100G AOC or 25GAUI C2M AOC
with worst BER of 5x10^(-5)\n",
+ pfx);
+ break;
+ case SFF_8636_ETHERNET_100G_SR4:
+ printf("%s 100G Ethernet: 100G Base-SR4 or
25GBase-SR\n",
+ pfx);
+ break;
+ case SFF_8636_ETHERNET_100G_LR4:
+ printf("%s 100G Ethernet: 100G Base-LR4\n", pfx);
+ break;
+ case SFF_8636_ETHERNET_100G_ER4:
+ printf("%s 100G Ethernet: 100G Base-ER4\n", pfx);
+ break;
+ case SFF_8636_ETHERNET_100G_SR10:
+ printf("%s 100G Ethernet: 100G Base-SR10\n", pfx);
+ break;
+ case SFF_8636_ETHERNET_100G_CWDM4_FEC:
+ printf("%s 100G Ethernet: 100G CWDM4 MSA with FEC\n",
pfx);
+ break;
+ case SFF_8636_ETHERNET_100G_PSM4:
+ printf("%s 100G Ethernet: 100G PSM4 Parallel SMF\n",
pfx);
+ break;
+ case SFF_8636_ETHERNET_100G_ACC:
+ printf("%s 100G Ethernet: 100G ACC or 25GAUI C2M ACC
with worst BER of 5x10^(-5)\n",
+ pfx);
+ break;
+ case SFF_8636_ETHERNET_100G_CWDM4_NO_FEC:
+ printf("%s 100G Ethernet: 100G CWDM4 MSA without
FEC\n", pfx);
+ break;
+ case SFF_8636_ETHERNET_100G_RSVD1:
+ printf("%s (reserved or unknown)\n", pfx);
+ break;
+ case SFF_8636_ETHERNET_100G_CR4:
+ printf("%s 100G Ethernet: 100G Base-CR4 or 25G Base-CR
CA-L\n",
+ pfx);
+ break;
+ case SFF_8636_ETHERNET_25G_CR_CA_S:
+ printf("%s 25G Ethernet: 25G Base-CR CA-S\n", pfx);
+ break;
+ case SFF_8636_ETHERNET_25G_CR_CA_N:
+ printf("%s 25G Ethernet: 25G Base-CR CA-N\n", pfx);
+ break;
+ case SFF_8636_ETHERNET_40G_ER4:
+ printf("%s 40G Ethernet: 40G Base-ER4\n", pfx);
+ break;
+ case SFF_8636_ETHERNET_4X10_SR:
+ printf("%s 4x10G Ethernet: 10G Base-SR\n", pfx);
+ break;
+ case SFF_8636_ETHERNET_40G_PSM4:
+ printf("%s 40G Ethernet: 40G PSM4 Parallel SMF\n", pfx);
+ break;
+ case SFF_8636_ETHERNET_G959_P1I1_2D1:
+ printf("%s Ethernet: G959.1 profile P1I1-2D1 (10709
MBd, 2km, 1310nm SM)\n",
+ pfx);
+ break;
+ case SFF_8636_ETHERNET_G959_P1S1_2D2:
+ printf("%s Ethernet: G959.1 profile P1S1-2D2 (10709
MBd, 40km, 1550nm SM)\n",
+ pfx);
+ break;
+ case SFF_8636_ETHERNET_G959_P1L1_2D2:
+ printf("%s Ethernet: G959.1 profile P1L1-2D2 (10709
MBd, 80km, 1550nm SM)\n",
+ pfx);
+ break;
+ case SFF_8636_ETHERNET_10GT_SFI:
+ printf("%s 10G Ethernet: 10G Base-T with SFI electrical
interface\n",
+ pfx);
+ break;
+ case SFF_8636_ETHERNET_100G_CLR4:
+ printf("%s 100G Ethernet: 100G CLR4\n", pfx);
+ break;
+ case SFF_8636_ETHERNET_100G_AOC2:
+ printf("%s 100G Ethernet: 100G AOC or 25GAUI C2M AOC
with worst BER of 10^(-12)\n",
+ pfx);
+ break;
+ case SFF_8636_ETHERNET_100G_ACC2:
+ printf("%s 100G Ethernet: 100G ACC or 25GAUI C2M ACC
with worst BER of 10^(-12)\n",
+ pfx);
+ break;
+ default:
+ printf("%s (reserved or unknown)\n", pfx);
+ break;
+ }
+ }
+
+ /* SONET Compliance Codes */
+ if (id[SFF_8636_SONET_COMP_OFFSET] & SFF_8636_SONET_40G_OTN)
+ printf("%s 40G OTN (OTU3B/OTU3C)\n", pfx);
+ if (id[SFF_8636_SONET_COMP_OFFSET] & SFF_8636_SONET_OC48_LR)
+ printf("%s SONET: OC-48, long reach\n", pfx);
+ if (id[SFF_8636_SONET_COMP_OFFSET] & SFF_8636_SONET_OC48_IR)
+ printf("%s SONET: OC-48, intermediate reach\n", pfx);
+ if (id[SFF_8636_SONET_COMP_OFFSET] & SFF_8636_SONET_OC48_SR)
+ printf("%s SONET: OC-48, short reach\n", pfx);
+
+ /* SAS/SATA Compliance Codes */
+ if (id[SFF_8636_SAS_COMP_OFFSET] & SFF_8636_SAS_6G)
+ printf("%s SAS 6.0G\n", pfx);
+ if (id[SFF_8636_SAS_COMP_OFFSET] & SFF_8636_SAS_3G)
+ printf("%s SAS 3.0G\n", pfx);
+
+ /* Ethernet Compliance Codes */
+ if (id[SFF_8636_GIGE_COMP_OFFSET] & SFF_8636_GIGE_1000_BASE_T)
+ printf("%s Ethernet: 1000BASE-T\n", pfx);
+ if (id[SFF_8636_GIGE_COMP_OFFSET] & SFF_8636_GIGE_1000_BASE_CX)
+ printf("%s Ethernet: 1000BASE-CX\n", pfx);
+ if (id[SFF_8636_GIGE_COMP_OFFSET] & SFF_8636_GIGE_1000_BASE_LX)
+ printf("%s Ethernet: 1000BASE-LX\n", pfx);
+ if (id[SFF_8636_GIGE_COMP_OFFSET] & SFF_8636_GIGE_1000_BASE_SX)
+ printf("%s Ethernet: 1000BASE-SX\n", pfx);
+
+ /* Fibre Channel link length */
+ if (id[SFF_8636_FC_LEN_OFFSET] & SFF_8636_FC_LEN_VERY_LONG)
+ printf("%s FC: very long distance (V)\n", pfx);
+ if (id[SFF_8636_FC_LEN_OFFSET] & SFF_8636_FC_LEN_SHORT)
+ printf("%s FC: short distance (S)\n", pfx);
+ if (id[SFF_8636_FC_LEN_OFFSET] & SFF_8636_FC_LEN_INT)
+ printf("%s FC: intermediate distance (I)\n", pfx);
+ if (id[SFF_8636_FC_LEN_OFFSET] & SFF_8636_FC_LEN_LONG)
+ printf("%s FC: long distance (L)\n", pfx);
+ if (id[SFF_8636_FC_LEN_OFFSET] & SFF_8636_FC_LEN_MED)
+ printf("%s FC: medium distance (M)\n", pfx);
+
+ /* Fibre Channel transmitter technology */
+ if (id[SFF_8636_FC_LEN_OFFSET] & SFF_8636_FC_TECH_LONG_LC)
+ printf("%s FC: Longwave laser (LC)\n", pfx);
+ if (id[SFF_8636_FC_LEN_OFFSET] & SFF_8636_FC_TECH_ELEC_INTER)
+ printf("%s FC: Electrical inter-enclosure (EL)\n", pfx);
+ if (id[SFF_8636_FC_TECH_OFFSET] & SFF_8636_FC_TECH_ELEC_INTRA)
+ printf("%s FC: Electrical intra-enclosure (EL)\n", pfx);
+ if (id[SFF_8636_FC_TECH_OFFSET] & SFF_8636_FC_TECH_SHORT_WO_OFC)
+ printf("%s FC: Shortwave laser w/o OFC (SN)\n", pfx);
+ if (id[SFF_8636_FC_TECH_OFFSET] & SFF_8636_FC_TECH_SHORT_W_OFC)
+ printf("%s FC: Shortwave laser with OFC (SL)\n", pfx);
+ if (id[SFF_8636_FC_TECH_OFFSET] & SFF_8636_FC_TECH_LONG_LL)
+ printf("%s FC: Longwave laser (LL)\n", pfx);
+
+ /* Fibre Channel transmission media */
+ if (id[SFF_8636_FC_TRANS_MEDIA_OFFSET] & SFF_8636_FC_TRANS_MEDIA_TW)
+ printf("%s FC: Twin Axial Pair (TW)\n", pfx);
+ if (id[SFF_8636_FC_TRANS_MEDIA_OFFSET] & SFF_8636_FC_TRANS_MEDIA_TP)
+ printf("%s FC: Twisted Pair (TP)\n", pfx);
+ if (id[SFF_8636_FC_TRANS_MEDIA_OFFSET] & SFF_8636_FC_TRANS_MEDIA_MI)
+ printf("%s FC: Miniature Coax (MI)\n", pfx);
+ if (id[SFF_8636_FC_TRANS_MEDIA_OFFSET] & SFF_8636_FC_TRANS_MEDIA_TV)
+ printf("%s FC: Video Coax (TV)\n", pfx);
+ if (id[SFF_8636_FC_TRANS_MEDIA_OFFSET] & SFF_8636_FC_TRANS_MEDIA_M6)
+ printf("%s FC: Multimode, 62.5m (M6)\n", pfx);
+ if (id[SFF_8636_FC_TRANS_MEDIA_OFFSET] & SFF_8636_FC_TRANS_MEDIA_M5)
+ printf("%s FC: Multimode, 50m (M5)\n", pfx);
+ if (id[SFF_8636_FC_TRANS_MEDIA_OFFSET] & SFF_8636_FC_TRANS_MEDIA_OM3)
+ printf("%s FC: Multimode, 50um (OM3)\n", pfx);
+ if (id[SFF_8636_FC_TRANS_MEDIA_OFFSET] & SFF_8636_FC_TRANS_MEDIA_SM)
+ printf("%s FC: Single Mode (SM)\n", pfx);
+
+ /* Fibre Channel speed */
+ if (id[SFF_8636_FC_SPEED_OFFSET] & SFF_8636_FC_SPEED_1200_MBPS)
+ printf("%s FC: 1200 MBytes/sec\n", pfx);
+ if (id[SFF_8636_FC_SPEED_OFFSET] & SFF_8636_FC_SPEED_800_MBPS)
+ printf("%s FC: 800 MBytes/sec\n", pfx);
+ if (id[SFF_8636_FC_SPEED_OFFSET] & SFF_8636_FC_SPEED_1600_MBPS)
+ printf("%s FC: 1600 MBytes/sec\n", pfx);
+ if (id[SFF_8636_FC_SPEED_OFFSET] & SFF_8636_FC_SPEED_400_MBPS)
+ printf("%s FC: 400 MBytes/sec\n", pfx);
+ if (id[SFF_8636_FC_SPEED_OFFSET] & SFF_8636_FC_SPEED_200_MBPS)
+ printf("%s FC: 200 MBytes/sec\n", pfx);
+ if (id[SFF_8636_FC_SPEED_OFFSET] & SFF_8636_FC_SPEED_100_MBPS)
+ printf("%s FC: 100 MBytes/sec\n", pfx);
+}
+
+static void sff_8636_show_encoding(const uint8_t *id)
+{
+ sff_8024_show_encoding(id, SFF_8636_ENCODING_OFFSET,
RTE_ETH_MODULE_SFF_8636);
+}
+
+static void sff_8636_show_rate_identifier(const uint8_t *id)
+{
+ /* TODO: Need to fix rate select logic */
+ printf("%-41s : 0x%02x\n", "Rate identifier",
+ id[SFF_8636_EXT_RS_OFFSET]);
+}
+
+static void sff_8636_show_oui(const uint8_t *id)
+{
+ sff_8024_show_oui(id, SFF_8636_VENDOR_OUI_OFFSET);
+}
+
+static void sff_8636_show_wavelength_or_copper_compliance(const uint8_t *id)
+{
+ printf("%-41s : 0x%02x", "Transmitter technology",
+ (id[SFF_8636_DEVICE_TECH_OFFSET] & SFF_8636_TRANS_TECH_MASK));
+
+ switch (id[SFF_8636_DEVICE_TECH_OFFSET] & SFF_8636_TRANS_TECH_MASK) {
+ case SFF_8636_TRANS_850_VCSEL:
+ printf(" (850 nm VCSEL)\n");
+ break;
+ case SFF_8636_TRANS_1310_VCSEL:
+ printf(" (1310 nm VCSEL)\n");
+ break;
+ case SFF_8636_TRANS_1550_VCSEL:
+ printf(" (1550 nm VCSEL)\n");
+ break;
+ case SFF_8636_TRANS_1310_FP:
+ printf(" (1310 nm FP)\n");
+ break;
+ case SFF_8636_TRANS_1310_DFB:
+ printf(" (1310 nm DFB)\n");
+ break;
+ case SFF_8636_TRANS_1550_DFB:
+ printf(" (1550 nm DFB)\n");
+ break;
+ case SFF_8636_TRANS_1310_EML:
+ printf(" (1310 nm EML)\n");
+ break;
+ case SFF_8636_TRANS_1550_EML:
+ printf(" (1550 nm EML)\n");
+ break;
+ case SFF_8636_TRANS_OTHERS:
+ printf(" (Others/Undefined)\n");
+ break;
+ case SFF_8636_TRANS_1490_DFB:
+ printf(" (1490 nm DFB)\n");
+ break;
+ case SFF_8636_TRANS_COPPER_PAS_UNEQUAL:
+ printf(" (Copper cable unequalized)\n");
+ break;
+ case SFF_8636_TRANS_COPPER_PAS_EQUAL:
+ printf(" (Copper cable passive equalized)\n");
+ break;
+ case SFF_8636_TRANS_COPPER_LNR_FAR_EQUAL:
+ printf(" (Copper cable, near and far end limiting active
equalizers)\n");
+ break;
+ case SFF_8636_TRANS_COPPER_FAR_EQUAL:
+ printf(" (Copper cable, far end limiting active equalizers)\n");
+ break;
+ case SFF_8636_TRANS_COPPER_NEAR_EQUAL:
+ printf(" (Copper cable, near end limiting active
equalizers)\n");
+ break;
+ case SFF_8636_TRANS_COPPER_LNR_EQUAL:
+ printf(" (Copper cable, linear active equalizers)\n");
+ break;
+ }
+
+ if ((id[SFF_8636_DEVICE_TECH_OFFSET] & SFF_8636_TRANS_TECH_MASK)
+ >= SFF_8636_TRANS_COPPER_PAS_UNEQUAL) {
+ printf("%-41s : %udb\n", "Attenuation at 2.5GHz",
+ id[SFF_8636_WAVELEN_HIGH_BYTE_OFFSET]);
+ printf("%-41s : %udb\n", "Attenuation at 5.0GHz",
+ id[SFF_8636_WAVELEN_LOW_BYTE_OFFSET]);
+ printf("%-41s : %udb\n", "Attenuation at 7.0GHz",
+ id[SFF_8636_WAVE_TOL_HIGH_BYTE_OFFSET]);
+ printf("%-41s : %udb\n", "Attenuation at 12.9GHz",
+ id[SFF_8636_WAVE_TOL_LOW_BYTE_OFFSET]);
+ } else {
+ printf("%-41s : %.3lfnm\n", "Laser wavelength",
+ (((id[SFF_8636_WAVELEN_HIGH_BYTE_OFFSET] << 8) |
+ id[SFF_8636_WAVELEN_LOW_BYTE_OFFSET])*0.05));
+ printf("%-41s : %.3lfnm\n", "Laser wavelength tolerance",
+ (((id[SFF_8636_WAVE_TOL_HIGH_BYTE_OFFSET] << 8) |
+ id[SFF_8636_WAVE_TOL_LOW_BYTE_OFFSET])*0.005));
+ }
+}
+
+static void sff_8636_show_revision_compliance(const uint8_t *id)
+{
+ static const char *pfx =
+ "Revision Compliance :";
+
+ switch (id[SFF_8636_REV_COMPLIANCE_OFFSET]) {
+ case SFF_8636_REV_UNSPECIFIED:
+ printf("%s Revision not specified\n", pfx);
+ break;
+ case SFF_8636_REV_8436_48:
+ printf("%s SFF-8436 Rev 4.8 or earlier\n", pfx);
+ break;
+ case SFF_8636_REV_8436_8636:
+ printf("%s SFF-8436 Rev 4.8 or earlier\n", pfx);
+ break;
+ case SFF_8636_REV_8636_13:
+ printf("%s SFF-8636 Rev 1.3 or earlier\n", pfx);
+ break;
+ case SFF_8636_REV_8636_14:
+ printf("%s SFF-8636 Rev 1.4\n", pfx);
+ break;
+ case SFF_8636_REV_8636_15:
+ printf("%s SFF-8636 Rev 1.5\n", pfx);
+ break;
+ case SFF_8636_REV_8636_20:
+ printf("%s SFF-8636 Rev 2.0\n", pfx);
+ break;
+ case SFF_8636_REV_8636_27:
+ printf("%s SFF-8636 Rev 2.5/2.6/2.7\n", pfx);
+ break;
+ default:
+ printf("%s Unallocated\n", pfx);
+ break;
+ }
+}
+
+/*
+ * 2-byte internal temperature conversions:
+ * First byte is a signed 8-bit integer, which is the temp decimal part
+ * Second byte are 1/256th of degree, which are added to the dec part.
+ */
+#define SFF_8636_OFFSET_TO_TEMP(offset) ((int16_t)OFFSET_TO_U16(offset))
+
+static void sff_8636_dom_parse(const uint8_t *id, struct sff_diags *sd)
+{
+ int i = 0;
+
+ /* Monitoring Thresholds for Alarms and Warnings */
+ sd->sfp_voltage[MCURR] = OFFSET_TO_U16(SFF_8636_VCC_CURR);
+ sd->sfp_voltage[HALRM] = OFFSET_TO_U16(SFF_8636_VCC_HALRM);
+ sd->sfp_voltage[LALRM] = OFFSET_TO_U16(SFF_8636_VCC_LALRM);
+ sd->sfp_voltage[HWARN] = OFFSET_TO_U16(SFF_8636_VCC_HWARN);
+ sd->sfp_voltage[LWARN] = OFFSET_TO_U16(SFF_8636_VCC_LWARN);
+
+ sd->sfp_temp[MCURR] = SFF_8636_OFFSET_TO_TEMP(SFF_8636_TEMP_CURR);
+ sd->sfp_temp[HALRM] = SFF_8636_OFFSET_TO_TEMP(SFF_8636_TEMP_HALRM);
+ sd->sfp_temp[LALRM] = SFF_8636_OFFSET_TO_TEMP(SFF_8636_TEMP_LALRM);
+ sd->sfp_temp[HWARN] = SFF_8636_OFFSET_TO_TEMP(SFF_8636_TEMP_HWARN);
+ sd->sfp_temp[LWARN] = SFF_8636_OFFSET_TO_TEMP(SFF_8636_TEMP_LWARN);
+
+ sd->bias_cur[HALRM] = OFFSET_TO_U16(SFF_8636_TX_BIAS_HALRM);
+ sd->bias_cur[LALRM] = OFFSET_TO_U16(SFF_8636_TX_BIAS_LALRM);
+ sd->bias_cur[HWARN] = OFFSET_TO_U16(SFF_8636_TX_BIAS_HWARN);
+ sd->bias_cur[LWARN] = OFFSET_TO_U16(SFF_8636_TX_BIAS_LWARN);
+
+ sd->tx_power[HALRM] = OFFSET_TO_U16(SFF_8636_TX_PWR_HALRM);
+ sd->tx_power[LALRM] = OFFSET_TO_U16(SFF_8636_TX_PWR_LALRM);
+ sd->tx_power[HWARN] = OFFSET_TO_U16(SFF_8636_TX_PWR_HWARN);
+ sd->tx_power[LWARN] = OFFSET_TO_U16(SFF_8636_TX_PWR_LWARN);
+
+ sd->rx_power[HALRM] = OFFSET_TO_U16(SFF_8636_RX_PWR_HALRM);
+ sd->rx_power[LALRM] = OFFSET_TO_U16(SFF_8636_RX_PWR_LALRM);
+ sd->rx_power[HWARN] = OFFSET_TO_U16(SFF_8636_RX_PWR_HWARN);
+ sd->rx_power[LWARN] = OFFSET_TO_U16(SFF_8636_RX_PWR_LWARN);
+
+
+ /* Channel Specific Data */
+ for (i = 0; i < MAX_CHANNEL_NUM; i++) {
+ uint8_t rx_power_offset, tx_bias_offset;
+ uint8_t tx_power_offset;
+
+ switch (i) {
+ case 0:
+ rx_power_offset = SFF_8636_RX_PWR_1_OFFSET;
+ tx_power_offset = SFF_8636_TX_PWR_1_OFFSET;
+ tx_bias_offset = SFF_8636_TX_BIAS_1_OFFSET;
+ break;
+ case 1:
+ rx_power_offset = SFF_8636_RX_PWR_2_OFFSET;
+ tx_power_offset = SFF_8636_TX_PWR_2_OFFSET;
+ tx_bias_offset = SFF_8636_TX_BIAS_2_OFFSET;
+ break;
+ case 2:
+ rx_power_offset = SFF_8636_RX_PWR_3_OFFSET;
+ tx_power_offset = SFF_8636_TX_PWR_3_OFFSET;
+ tx_bias_offset = SFF_8636_TX_BIAS_3_OFFSET;
+ break;
+ case 3:
+ rx_power_offset = SFF_8636_RX_PWR_4_OFFSET;
+ tx_power_offset = SFF_8636_TX_PWR_4_OFFSET;
+ tx_bias_offset = SFF_8636_TX_BIAS_4_OFFSET;
+ break;
+ }
+ sd->scd[i].bias_cur = OFFSET_TO_U16(tx_bias_offset);
+ sd->scd[i].rx_power = OFFSET_TO_U16(rx_power_offset);
+ sd->scd[i].tx_power = OFFSET_TO_U16(tx_power_offset);
+ }
+
+}
+
+static void sff_8636_show_dom(const uint8_t *id, uint32_t eeprom_len)
+{
+ struct sff_diags sd = {0};
+ const char *rx_power_string = NULL;
+ char power_string[MAX_DESC_SIZE];
+ int i;
+
+ /*
+ * There is no clear identifier to signify the existence of
+ * optical diagnostics similar to SFF-8472. So checking existence
+ * of page 3, will provide the gurantee for existence of alarms
+ * and thresholds
+ * If pagging support exists, then supports_alarms is marked as 1
+ */
+
+ if (eeprom_len == RTE_ETH_MODULE_SFF_8636_MAX_LEN) {
+ if (!(id[SFF_8636_STATUS_2_OFFSET] &
+ SFF_8636_STATUS_PAGE_3_PRESENT)) {
+ sd.supports_alarms = 1;
+ }
+ }
+
+ sd.rx_power_type = id[SFF_8636_DIAG_TYPE_OFFSET] &
+ SFF_8636_RX_PWR_TYPE_MASK;
+ sd.tx_power_type = id[SFF_8636_DIAG_TYPE_OFFSET] &
+ SFF_8636_RX_PWR_TYPE_MASK;
+
+ sff_8636_dom_parse(id, &sd);
+
+ PRINT_TEMP("Module temperature", sd.sfp_temp[MCURR]);
+ PRINT_VCC("Module voltage", sd.sfp_voltage[MCURR]);
+
+ /*
+ * SFF-8636/8436 spec is not clear whether RX power/ TX bias
+ * current fields are supported or not. A valid temperature
+ * reading is used as existence for TX/RX power.
+ */
+ if ((sd.sfp_temp[MCURR] == 0x0) ||
+ (sd.sfp_temp[MCURR] == (int16_t)0xFFFF))
+ return;
+
+ printf("%-41s : %s\n", "Alarm/warning flags implemented",
+ (sd.supports_alarms ? "Yes" : "No"));
+
+ for (i = 0; i < MAX_CHANNEL_NUM; i++) {
+ snprintf(power_string, MAX_DESC_SIZE, "%s (Channel %d)",
+ "Laser tx bias current", i+1);
+ PRINT_BIAS(power_string, sd.scd[i].bias_cur);
+ }
+
+ for (i = 0; i < MAX_CHANNEL_NUM; i++) {
+ snprintf(power_string, MAX_DESC_SIZE, "%s (Channel %d)",
+ "Transmit avg optical power", i+1);
+ PRINT_xX_PWR(power_string, sd.scd[i].tx_power);
+ }
+
+ if (!sd.rx_power_type)
+ rx_power_string = "Receiver signal OMA";
+ else
+ rx_power_string = "Rcvr signal avg optical power";
+
+ for (i = 0; i < MAX_CHANNEL_NUM; i++) {
+ snprintf(power_string, MAX_DESC_SIZE, "%s(Channel %d)",
+ rx_power_string, i+1);
+ PRINT_xX_PWR(power_string, sd.scd[i].rx_power);
+ }
+
+ if (sd.supports_alarms) {
+ for (i = 0; sff_8636_aw_flags[i].str; ++i) {
+ printf("%-41s : %s\n", sff_8636_aw_flags[i].str,
+ id[sff_8636_aw_flags[i].offset]
+ & sff_8636_aw_flags[i].value ? "On" : "Off");
+ }
+
+ sff_show_thresholds(sd);
+ }
+
+}
+void sff_8636_show_all(const uint8_t *id, uint32_t eeprom_len)
+{
+ sff_8636_show_identifier(id);
+ if ((id[SFF_8636_ID_OFFSET] == SFF_8024_ID_QSFP) ||
+ (id[SFF_8636_ID_OFFSET] == SFF_8024_ID_QSFP_PLUS) ||
+ (id[SFF_8636_ID_OFFSET] == SFF_8024_ID_QSFP28)) {
+ sff_8636_show_ext_identifier(id);
+ sff_8636_show_connector(id);
+ sff_8636_show_transceiver(id);
+ sff_8636_show_encoding(id);
+ sff_show_value_with_unit(id, SFF_8636_BR_NOMINAL_OFFSET,
+ "BR, Nominal", 100, "Mbps");
+ sff_8636_show_rate_identifier(id);
+ sff_show_value_with_unit(id, SFF_8636_SM_LEN_OFFSET,
+ "Length (SMF,km)", 1, "km");
+ sff_show_value_with_unit(id, SFF_8636_OM3_LEN_OFFSET,
+ "Length (OM3 50um)", 2, "m");
+ sff_show_value_with_unit(id, SFF_8636_OM2_LEN_OFFSET,
+ "Length (OM2 50um)", 1, "m");
+ sff_show_value_with_unit(id, SFF_8636_OM1_LEN_OFFSET,
+ "Length (OM1 62.5um)", 1, "m");
+ sff_show_value_with_unit(id, SFF_8636_CBL_LEN_OFFSET,
+ "Length (Copper or Active cable)", 1, "m");
+ sff_8636_show_wavelength_or_copper_compliance(id);
+ sff_show_ascii(id, SFF_8636_VENDOR_NAME_START_OFFSET,
+ SFF_8636_VENDOR_NAME_END_OFFSET, "Vendor name");
+ sff_8636_show_oui(id);
+ sff_show_ascii(id, SFF_8636_VENDOR_PN_START_OFFSET,
+ SFF_8636_VENDOR_PN_END_OFFSET, "Vendor PN");
+ sff_show_ascii(id, SFF_8636_VENDOR_REV_START_OFFSET,
+ SFF_8636_VENDOR_REV_END_OFFSET, "Vendor rev");
+ sff_show_ascii(id, SFF_8636_VENDOR_SN_START_OFFSET,
+ SFF_8636_VENDOR_SN_END_OFFSET, "Vendor SN");
+ sff_show_ascii(id, SFF_8636_DATE_YEAR_OFFSET,
+ SFF_8636_DATE_VENDOR_LOT_OFFSET + 1, "Date code");
+ sff_8636_show_revision_compliance(id);
+ sff_8636_show_dom(id, eeprom_len);
+ }
+}
diff --git a/app/test-pmd/sff_8636.h b/app/test-pmd/sff_8636.h
new file mode 100644
index 0000000000..d19e6c744e
--- /dev/null
+++ b/app/test-pmd/sff_8636.h
@@ -0,0 +1,592 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2022 Intel Corporation
+ *
+ * SFF-8636 standards based QSFP EEPROM Field Definitions
+ *
+ */
+
+#ifndef SFF_8636_H__
+#define SFF_8636_H__
+
+/*------------------------------------------------------------------------------
+ *
+ * QSFP EEPROM data structures
+ *
+ * register info from SFF-8636 Rev 2.7
+ */
+
+/*------------------------------------------------------------------------------
+ *
+ * Lower Memory Page 00h
+ * Measurement, Diagnostic and Control Functions
+ *
+ */
+/* Identifier - 0 */
+/* Values are defined under SFF_8024_ID_OFFSET */
+#define SFF_8636_ID_OFFSET 0x00
+
+#define SFF_8636_REV_COMPLIANCE_OFFSET 0x01
+#define SFF_8636_REV_UNSPECIFIED 0x00
+#define SFF_8636_REV_8436_48 0x01
+#define SFF_8636_REV_8436_8636 0x02
+#define SFF_8636_REV_8636_13 0x03
+#define SFF_8636_REV_8636_14 0x04
+#define SFF_8636_REV_8636_15 0x05
+#define SFF_8636_REV_8636_20 0x06
+#define SFF_8636_REV_8636_27 0x07
+
+#define SFF_8636_STATUS_2_OFFSET 0x02
+/* Flat Memory:0- Paging, 1- Page 0 only */
+#define SFF_8636_STATUS_PAGE_3_PRESENT (1 << 2)
+#define SFF_8636_STATUS_INTL_OUTPUT (1 << 1)
+#define SFF_8636_STATUS_DATA_NOT_READY (1 << 0)
+
+/* Channel Status Interrupt Flags - 3-5 */
+#define SFF_8636_LOS_AW_OFFSET 0x03
+#define SFF_8636_TX4_LOS_AW (1 << 7)
+#define SFF_8636_TX3_LOS_AW (1 << 6)
+#define SFF_8636_TX2_LOS_AW (1 << 5)
+#define SFF_8636_TX1_LOS_AW (1 << 4)
+#define SFF_8636_RX4_LOS_AW (1 << 3)
+#define SFF_8636_RX3_LOS_AW (1 << 2)
+#define SFF_8636_RX2_LOS_AW (1 << 1)
+#define SFF_8636_RX1_LOS_AW (1 << 0)
+
+#define SFF_8636_FAULT_AW_OFFSET 0x04
+#define SFF_8636_TX4_FAULT_AW (1 << 3)
+#define SFF_8636_TX3_FAULT_AW (1 << 2)
+#define SFF_8636_TX2_FAULT_AW (1 << 1)
+#define SFF_8636_TX1_FAULT_AW (1 << 0)
+
+/* Module Monitor Interrupt Flags - 6-8 */
+#define SFF_8636_TEMP_AW_OFFSET 0x06
+#define SFF_8636_TEMP_HALARM_STATUS (1 << 7)
+#define SFF_8636_TEMP_LALARM_STATUS (1 << 6)
+#define SFF_8636_TEMP_HWARN_STATUS (1 << 5)
+#define SFF_8636_TEMP_LWARN_STATUS (1 << 4)
+
+#define SFF_8636_VCC_AW_OFFSET 0x07
+#define SFF_8636_VCC_HALARM_STATUS (1 << 7)
+#define SFF_8636_VCC_LALARM_STATUS (1 << 6)
+#define SFF_8636_VCC_HWARN_STATUS (1 << 5)
+#define SFF_8636_VCC_LWARN_STATUS (1 << 4)
+
+/* Channel Monitor Interrupt Flags - 9-21 */
+#define SFF_8636_RX_PWR_12_AW_OFFSET 0x09
+#define SFF_8636_RX_PWR_1_HALARM (1 << 7)
+#define SFF_8636_RX_PWR_1_LALARM (1 << 6)
+#define SFF_8636_RX_PWR_1_HWARN (1 << 5)
+#define SFF_8636_RX_PWR_1_LWARN (1 << 4)
+#define SFF_8636_RX_PWR_2_HALARM (1 << 3)
+#define SFF_8636_RX_PWR_2_LALARM (1 << 2)
+#define SFF_8636_RX_PWR_2_HWARN (1 << 1)
+#define SFF_8636_RX_PWR_2_LWARN (1 << 0)
+
+#define SFF_8636_RX_PWR_34_AW_OFFSET 0x0A
+#define SFF_8636_RX_PWR_3_HALARM (1 << 7)
+#define SFF_8636_RX_PWR_3_LALARM (1 << 6)
+#define SFF_8636_RX_PWR_3_HWARN (1 << 5)
+#define SFF_8636_RX_PWR_3_LWARN (1 << 4)
+#define SFF_8636_RX_PWR_4_HALARM (1 << 3)
+#define SFF_8636_RX_PWR_4_LALARM (1 << 2)
+#define SFF_8636_RX_PWR_4_HWARN (1 << 1)
+#define SFF_8636_RX_PWR_4_LWARN (1 << 0)
+
+#define SFF_8636_TX_BIAS_12_AW_OFFSET 0x0B
+#define SFF_8636_TX_BIAS_1_HALARM (1 << 7)
+#define SFF_8636_TX_BIAS_1_LALARM (1 << 6)
+#define SFF_8636_TX_BIAS_1_HWARN (1 << 5)
+#define SFF_8636_TX_BIAS_1_LWARN (1 << 4)
+#define SFF_8636_TX_BIAS_2_HALARM (1 << 3)
+#define SFF_8636_TX_BIAS_2_LALARM (1 << 2)
+#define SFF_8636_TX_BIAS_2_HWARN (1 << 1)
+#define SFF_8636_TX_BIAS_2_LWARN (1 << 0)
+
+#define SFF_8636_TX_BIAS_34_AW_OFFSET 0xC
+#define SFF_8636_TX_BIAS_3_HALARM (1 << 7)
+#define SFF_8636_TX_BIAS_3_LALARM (1 << 6)
+#define SFF_8636_TX_BIAS_3_HWARN (1 << 5)
+#define SFF_8636_TX_BIAS_3_LWARN (1 << 4)
+#define SFF_8636_TX_BIAS_4_HALARM (1 << 3)
+#define SFF_8636_TX_BIAS_4_LALARM (1 << 2)
+#define SFF_8636_TX_BIAS_4_HWARN (1 << 1)
+#define SFF_8636_TX_BIAS_4_LWARN (1 << 0)
+
+#define SFF_8636_TX_PWR_12_AW_OFFSET 0x0D
+#define SFF_8636_TX_PWR_1_HALARM (1 << 7)
+#define SFF_8636_TX_PWR_1_LALARM (1 << 6)
+#define SFF_8636_TX_PWR_1_HWARN (1 << 5)
+#define SFF_8636_TX_PWR_1_LWARN (1 << 4)
+#define SFF_8636_TX_PWR_2_HALARM (1 << 3)
+#define SFF_8636_TX_PWR_2_LALARM (1 << 2)
+#define SFF_8636_TX_PWR_2_HWARN (1 << 1)
+#define SFF_8636_TX_PWR_2_LWARN (1 << 0)
+
+#define SFF_8636_TX_PWR_34_AW_OFFSET 0x0E
+#define SFF_8636_TX_PWR_3_HALARM (1 << 7)
+#define SFF_8636_TX_PWR_3_LALARM (1 << 6)
+#define SFF_8636_TX_PWR_3_HWARN (1 << 5)
+#define SFF_8636_TX_PWR_3_LWARN (1 << 4)
+#define SFF_8636_TX_PWR_4_HALARM (1 << 3)
+#define SFF_8636_TX_PWR_4_LALARM (1 << 2)
+#define SFF_8636_TX_PWR_4_HWARN (1 << 1)
+#define SFF_8636_TX_PWR_4_LWARN (1 << 0)
+
+/* Module Monitoring Values - 22-33 */
+#define SFF_8636_TEMP_CURR 0x16
+#define SFF_8636_TEMP_MSB_OFFSET 0x16
+#define SFF_8636_TEMP_LSB_OFFSET 0x17
+
+#define SFF_8636_VCC_CURR 0x1A
+#define SFF_8636_VCC_MSB_OFFSET 0x1A
+#define SFF_8636_VCC_LSB_OFFSET 0x1B
+
+/* Channel Monitoring Values - 34-81 */
+#define SFF_8636_RX_PWR_1_OFFSET 0x22
+#define SFF_8636_RX_PWR_2_OFFSET 0x24
+#define SFF_8636_RX_PWR_3_OFFSET 0x26
+#define SFF_8636_RX_PWR_4_OFFSET 0x28
+
+#define SFF_8636_TX_BIAS_1_OFFSET 0x2A
+#define SFF_8636_TX_BIAS_2_OFFSET 0x2C
+#define SFF_8636_TX_BIAS_3_OFFSET 0x2E
+#define SFF_8636_TX_BIAS_4_OFFSET 0x30
+
+#define SFF_8636_TX_PWR_1_OFFSET 0x32
+#define SFF_8636_TX_PWR_2_OFFSET 0x34
+#define SFF_8636_TX_PWR_3_OFFSET 0x36
+#define SFF_8636_TX_PWR_4_OFFSET 0x38
+
+/* Control Bytes - 86 - 99 */
+#define SFF_8636_TX_DISABLE_OFFSET 0x56
+#define SFF_8636_TX_DISABLE_4 (1 << 3)
+#define SFF_8636_TX_DISABLE_3 (1 << 2)
+#define SFF_8636_TX_DISABLE_2 (1 << 1)
+#define SFF_8636_TX_DISABLE_1 (1 << 0)
+
+#define SFF_8636_RX_RATE_SELECT_OFFSET 0x57
+#define SFF_8636_RX_RATE_SELECT_4_MASK (3 << 6)
+#define SFF_8636_RX_RATE_SELECT_3_MASK (3 << 4)
+#define SFF_8636_RX_RATE_SELECT_2_MASK (3 << 2)
+#define SFF_8636_RX_RATE_SELECT_1_MASK (3 << 0)
+
+#define SFF_8636_TX_RATE_SELECT_OFFSET 0x58
+#define SFF_8636_TX_RATE_SELECT_4_MASK (3 << 6)
+#define SFF_8636_TX_RATE_SELECT_3_MASK (3 << 4)
+#define SFF_8636_TX_RATE_SELECT_2_MASK (3 << 2)
+#define SFF_8636_TX_RATE_SELECT_1_MASK (3 << 0)
+
+#define SFF_8636_RX_APP_SELECT_4_OFFSET 0x58
+#define SFF_8636_RX_APP_SELECT_3_OFFSET 0x59
+#define SFF_8636_RX_APP_SELECT_2_OFFSET 0x5A
+#define SFF_8636_RX_APP_SELECT_1_OFFSET 0x5B
+
+#define SFF_8636_PWR_MODE_OFFSET 0x5D
+#define SFF_8636_HIGH_PWR_ENABLE (1 << 2)
+#define SFF_8636_LOW_PWR_MODE (1 << 1)
+#define SFF_8636_PWR_OVERRIDE (1 << 0)
+
+#define SFF_8636_TX_APP_SELECT_4_OFFSET 0x5E
+#define SFF_8636_TX_APP_SELECT_3_OFFSET 0x5F
+#define SFF_8636_TX_APP_SELECT_2_OFFSET 0x60
+#define SFF_8636_TX_APP_SELECT_1_OFFSET 0x61
+
+#define SFF_8636_LOS_MASK_OFFSET 0x64
+#define SFF_8636_TX_LOS_4_MASK (1 << 7)
+#define SFF_8636_TX_LOS_3_MASK (1 << 6)
+#define SFF_8636_TX_LOS_2_MASK (1 << 5)
+#define SFF_8636_TX_LOS_1_MASK (1 << 4)
+#define SFF_8636_RX_LOS_4_MASK (1 << 3)
+#define SFF_8636_RX_LOS_3_MASK (1 << 2)
+#define SFF_8636_RX_LOS_2_MASK (1 << 1)
+#define SFF_8636_RX_LOS_1_MASK (1 << 0)
+
+#define SFF_8636_FAULT_MASK_OFFSET 0x65
+#define SFF_8636_TX_FAULT_1_MASK (1 << 3)
+#define SFF_8636_TX_FAULT_2_MASK (1 << 2)
+#define SFF_8636_TX_FAULT_3_MASK (1 << 1)
+#define SFF_8636_TX_FAULT_4_MASK (1 << 0)
+
+#define SFF_8636_TEMP_MASK_OFFSET 0x67
+#define SFF_8636_TEMP_HALARM_MASK (1 << 7)
+#define SFF_8636_TEMP_LALARM_MASK (1 << 6)
+#define SFF_8636_TEMP_HWARN_MASK (1 << 5)
+#define SFF_8636_TEMP_LWARN_MASK (1 << 4)
+
+#define SFF_8636_VCC_MASK_OFFSET 0x68
+#define SFF_8636_VCC_HALARM_MASK (1 << 7)
+#define SFF_8636_VCC_LALARM_MASK (1 << 6)
+#define SFF_8636_VCC_HWARN_MASK (1 << 5)
+#define SFF_8636_VCC_LWARN_MASK (1 << 4)
+
+/*------------------------------------------------------------------------------
+ *
+ * Upper Memory Page 00h
+ * Serial ID - Base ID, Extended ID and Vendor Specific ID fields
+ *
+ */
+/* Identifier - 128 */
+/* Identifier values same as Lower Memory Page 00h */
+#define SFF_8636_UPPER_PAGE_0_ID_OFFSET 0x80
+
+/* Extended Identifier - 128 */
+#define SFF_8636_EXT_ID_OFFSET 0x81
+#define SFF_8636_EXT_ID_PWR_CLASS_MASK 0xC0
+#define SFF_8636_EXT_ID_PWR_CLASS_1 (0 << 6)
+#define SFF_8636_EXT_ID_PWR_CLASS_2 (1 << 6)
+#define SFF_8636_EXT_ID_PWR_CLASS_3 (2 << 6)
+#define SFF_8636_EXT_ID_PWR_CLASS_4 (3 << 6)
+#define SFF_8636_EXT_ID_CLIE_MASK 0x10
+#define SFF_8636_EXT_ID_CLIEI_CODE_PRESENT (1 << 4)
+#define SFF_8636_EXT_ID_CDR_TX_MASK 0x08
+#define SFF_8636_EXT_ID_CDR_TX_PRESENT (1 << 3)
+#define SFF_8636_EXT_ID_CDR_RX_MASK 0x04
+#define SFF_8636_EXT_ID_CDR_RX_PRESENT (1 << 2)
+#define SFF_8636_EXT_ID_EPWR_CLASS_MASK 0x03
+#define SFF_8636_EXT_ID_PWR_CLASS_LEGACY 0
+#define SFF_8636_EXT_ID_PWR_CLASS_5 1
+#define SFF_8636_EXT_ID_PWR_CLASS_6 2
+#define SFF_8636_EXT_ID_PWR_CLASS_7 3
+
+/* Connector Values offset - 130 */
+/* Values are defined under SFF_8024_CTOR */
+#define SFF_8636_CTOR_OFFSET 0x82
+#define SFF_8636_CTOR_UNKNOWN 0x00
+#define SFF_8636_CTOR_SC 0x01
+#define SFF_8636_CTOR_FC_STYLE_1 0x02
+#define SFF_8636_CTOR_FC_STYLE_2 0x03
+#define SFF_8636_CTOR_BNC_TNC 0x04
+#define SFF_8636_CTOR_FC_COAX 0x05
+#define SFF_8636_CTOR_FIBER_JACK 0x06
+#define SFF_8636_CTOR_LC 0x07
+#define SFF_8636_CTOR_MT_RJ 0x08
+#define SFF_8636_CTOR_MU 0x09
+#define SFF_8636_CTOR_SG 0x0A
+#define SFF_8636_CTOR_OPT_PT 0x0B
+#define SFF_8636_CTOR_MPO 0x0C
+/* 0D-1Fh --- Reserved */
+#define SFF_8636_CTOR_HSDC_II 0x20
+#define SFF_8636_CTOR_COPPER_PT 0x21
+#define SFF_8636_CTOR_RJ45 0x22
+#define SFF_8636_CTOR_NO_SEPARABLE 0x23
+#define SFF_8636_CTOR_MXC_2X16 0x24
+
+/* Specification Compliance - 131-138 */
+/* Ethernet Compliance Codes - 131 */
+#define SFF_8636_ETHERNET_COMP_OFFSET 0x83
+#define SFF_8636_ETHERNET_RSRVD (1 << 7)
+#define SFF_8636_ETHERNET_10G_LRM (1 << 6)
+#define SFF_8636_ETHERNET_10G_LR (1 << 5)
+#define SFF_8636_ETHERNET_10G_SR (1 << 4)
+#define SFF_8636_ETHERNET_40G_CR4 (1 << 3)
+#define SFF_8636_ETHERNET_40G_SR4 (1 << 2)
+#define SFF_8636_ETHERNET_40G_LR4 (1 << 1)
+#define SFF_8636_ETHERNET_40G_ACTIVE (1 << 0)
+
+/* SONET Compliance Codes - 132 */
+#define SFF_8636_SONET_COMP_OFFSET 0x84
+#define SFF_8636_SONET_40G_OTN (1 << 3)
+#define SFF_8636_SONET_OC48_LR (1 << 2)
+#define SFF_8636_SONET_OC48_IR (1 << 1)
+#define SFF_8636_SONET_OC48_SR (1 << 0)
+
+/* SAS/SATA Complaince Codes - 133 */
+#define SFF_8636_SAS_COMP_OFFSET 0x85
+#define SFF_8636_SAS_12G (1 << 6)
+#define SFF_8636_SAS_6G (1 << 5)
+#define SFF_8636_SAS_3G (1 << 4)
+
+/* Gigabit Ethernet Compliance Codes - 134 */
+#define SFF_8636_GIGE_COMP_OFFSET 0x86
+#define SFF_8636_GIGE_1000_BASE_T (1 << 3)
+#define SFF_8636_GIGE_1000_BASE_CX (1 << 2)
+#define SFF_8636_GIGE_1000_BASE_LX (1 << 1)
+#define SFF_8636_GIGE_1000_BASE_SX (1 << 0)
+
+/* Fibre Channel Link length/Transmitter Tech. - 135,136 */
+#define SFF_8636_FC_LEN_OFFSET 0x87
+#define SFF_8636_FC_LEN_VERY_LONG (1 << 7)
+#define SFF_8636_FC_LEN_SHORT (1 << 6)
+#define SFF_8636_FC_LEN_INT (1 << 5)
+#define SFF_8636_FC_LEN_LONG (1 << 4)
+#define SFF_8636_FC_LEN_MED (1 << 3)
+#define SFF_8636_FC_TECH_LONG_LC (1 << 1)
+#define SFF_8636_FC_TECH_ELEC_INTER (1 << 0)
+
+#define SFF_8636_FC_TECH_OFFSET 0x88
+#define SFF_8636_FC_TECH_ELEC_INTRA (1 << 7)
+#define SFF_8636_FC_TECH_SHORT_WO_OFC (1 << 6)
+#define SFF_8636_FC_TECH_SHORT_W_OFC (1 << 5)
+#define SFF_8636_FC_TECH_LONG_LL (1 << 4)
+
+/* Fibre Channel Transmitter Media - 137 */
+#define SFF_8636_FC_TRANS_MEDIA_OFFSET 0x89
+/* Twin Axial Pair */
+#define SFF_8636_FC_TRANS_MEDIA_TW (1 << 7)
+/* Shielded Twisted Pair */
+#define SFF_8636_FC_TRANS_MEDIA_TP (1 << 6)
+/* Miniature Coax */
+#define SFF_8636_FC_TRANS_MEDIA_MI (1 << 5)
+/* Video Coax */
+#define SFF_8636_FC_TRANS_MEDIA_TV (1 << 4)
+/* Multi-mode 62.5m */
+#define SFF_8636_FC_TRANS_MEDIA_M6 (1 << 3)
+/* Multi-mode 50m */
+#define SFF_8636_FC_TRANS_MEDIA_M5 (1 << 2)
+/* Multi-mode 50um */
+#define SFF_8636_FC_TRANS_MEDIA_OM3 (1 << 1)
+/* Single Mode */
+#define SFF_8636_FC_TRANS_MEDIA_SM (1 << 0)
+
+/* Fibre Channel Speed - 138 */
+#define SFF_8636_FC_SPEED_OFFSET 0x8A
+#define SFF_8636_FC_SPEED_1200_MBPS (1 << 7)
+#define SFF_8636_FC_SPEED_800_MBPS (1 << 6)
+#define SFF_8636_FC_SPEED_1600_MBPS (1 << 5)
+#define SFF_8636_FC_SPEED_400_MBPS (1 << 4)
+#define SFF_8636_FC_SPEED_200_MBPS (1 << 2)
+#define SFF_8636_FC_SPEED_100_MBPS (1 << 0)
+
+/* Encoding - 139 */
+/* Values are defined under SFF_8024_ENCODING */
+#define SFF_8636_ENCODING_OFFSET 0x8B
+#define SFF_8636_ENCODING_MANCHESTER 0x06
+#define SFF_8636_ENCODING_64B66B 0x05
+#define SFF_8636_ENCODING_SONET 0x04
+#define SFF_8636_ENCODING_NRZ 0x03
+#define SFF_8636_ENCODING_4B5B 0x02
+#define SFF_8636_ENCODING_8B10B 0x01
+#define SFF_8636_ENCODING_UNSPEC 0x00
+
+/* BR, Nominal - 140 */
+#define SFF_8636_BR_NOMINAL_OFFSET 0x8C
+
+/* Extended RateSelect - 141 */
+#define SFF_8636_EXT_RS_OFFSET 0x8D
+#define SFF_8636_EXT_RS_V1 (1 << 0)
+
+/* Length (Standard SM Fiber)-km - 142 */
+#define SFF_8636_SM_LEN_OFFSET 0x8E
+
+/* Length (OM3)-Unit 2m - 143 */
+#define SFF_8636_OM3_LEN_OFFSET 0x8F
+
+/* Length (OM2)-Unit 1m - 144 */
+#define SFF_8636_OM2_LEN_OFFSET 0x90
+
+/* Length (OM1)-Unit 1m - 145 */
+#define SFF_8636_OM1_LEN_OFFSET 0x91
+
+/* Cable Assembly Length -Unit 1m - 146 */
+#define SFF_8636_CBL_LEN_OFFSET 0x92
+
+/* Device Technology - 147 */
+#define SFF_8636_DEVICE_TECH_OFFSET 0x93
+/* Transmitter Technology */
+#define SFF_8636_TRANS_TECH_MASK 0xF0
+/* Copper cable, linear active equalizers */
+#define SFF_8636_TRANS_COPPER_LNR_EQUAL (15 << 4)
+/* Copper cable, near end limiting active equalizers */
+#define SFF_8636_TRANS_COPPER_NEAR_EQUAL (14 << 4)
+/* Copper cable, far end limiting active equalizers */
+#define SFF_8636_TRANS_COPPER_FAR_EQUAL (13 << 4)
+/* Copper cable, near & far end limiting active equalizers */
+#define SFF_8636_TRANS_COPPER_LNR_FAR_EQUAL (12 << 4)
+/* Copper cable, passive equalized */
+#define SFF_8636_TRANS_COPPER_PAS_EQUAL (11 << 4)
+/* Copper cable, unequalized */
+#define SFF_8636_TRANS_COPPER_PAS_UNEQUAL (10 << 4)
+/* 1490 nm DFB */
+#define SFF_8636_TRANS_1490_DFB (9 << 4)
+/* Others */
+#define SFF_8636_TRANS_OTHERS (8 << 4)
+/* 1550 nm EML */
+#define SFF_8636_TRANS_1550_EML (7 << 4)
+/* 1310 nm EML */
+#define SFF_8636_TRANS_1310_EML (6 << 4)
+/* 1550 nm DFB */
+#define SFF_8636_TRANS_1550_DFB (5 << 4)
+/* 1310 nm DFB */
+#define SFF_8636_TRANS_1310_DFB (4 << 4)
+/* 1310 nm FP */
+#define SFF_8636_TRANS_1310_FP (3 << 4)
+/* 1550 nm VCSEL */
+#define SFF_8636_TRANS_1550_VCSEL (2 << 4)
+/* 1310 nm VCSEL */
+#define SFF_8636_TRANS_1310_VCSEL (1 << 4)
+/* 850 nm VCSEL */
+#define SFF_8636_TRANS_850_VCSEL (0 << 4)
+
+ /* Active/No wavelength control */
+#define SFF_8636_DEV_TECH_ACTIVE_WAVE_LEN (1 << 3)
+/* Cooled transmitter */
+#define SFF_8636_DEV_TECH_COOL_TRANS (1 << 2)
+/* APD/Pin Detector */
+#define SFF_8636_DEV_TECH_APD_DETECTOR (1 << 1)
+/* Transmitter tunable */
+#define SFF_8636_DEV_TECH_TUNABLE (1 << 0)
+
+/* Vendor Name - 148-163 */
+#define SFF_8636_VENDOR_NAME_START_OFFSET 0x94
+#define SFF_8636_VENDOR_NAME_END_OFFSET 0xA3
+
+/* Extended Module Codes - 164 */
+#define SFF_8636_EXT_MOD_CODE_OFFSET 0xA4
+#define SFF_8636_EXT_MOD_INFINIBAND_EDR (1 << 4)
+#define SFF_8636_EXT_MOD_INFINIBAND_FDR (1 << 3)
+#define SFF_8636_EXT_MOD_INFINIBAND_QDR (1 << 2)
+#define SFF_8636_EXT_MOD_INFINIBAND_DDR (1 << 1)
+#define SFF_8636_EXT_MOD_INFINIBAND_SDR (1 << 0)
+
+/* Vendor OUI - 165-167 */
+#define SFF_8636_VENDOR_OUI_OFFSET 0xA5
+#define SFF_8636_VENDOR_OUI_LEN 3
+
+/* Vendor OUI - 165-167 */
+#define SFF_8636_VENDOR_PN_START_OFFSET 0xA8
+#define SFF_8636_VENDOR_PN_END_OFFSET 0xB7
+
+/* Vendor Revision - 184-185 */
+#define SFF_8636_VENDOR_REV_START_OFFSET 0xB8
+#define SFF_8636_VENDOR_REV_END_OFFSET 0xB9
+
+/* Wavelength - 186-187 */
+#define SFF_8636_WAVELEN_HIGH_BYTE_OFFSET 0xBA
+#define SFF_8636_WAVELEN_LOW_BYTE_OFFSET 0xBB
+
+/* Wavelength Tolerance- 188-189 */
+#define SFF_8636_WAVE_TOL_HIGH_BYTE_OFFSET 0xBC
+#define SFF_8636_WAVE_TOL_LOW_BYTE_OFFSET 0xBD
+
+/* Max case temp - Other than 70 C - 190 */
+#define SFF_8636_MAXCASE_TEMP_OFFSET 0xBE
+
+/* CC_BASE - 191 */
+#define SFF_8636_CC_BASE_OFFSET 0xBF
+
+/* Option Values - 192-195 */
+#define SFF_8636_OPTION_1_OFFSET 0xC0
+#define SFF_8636_ETHERNET_UNSPECIFIED 0x00
+#define SFF_8636_ETHERNET_100G_AOC 0x01
+#define SFF_8636_ETHERNET_100G_SR4 0x02
+#define SFF_8636_ETHERNET_100G_LR4 0x03
+#define SFF_8636_ETHERNET_100G_ER4 0x04
+#define SFF_8636_ETHERNET_100G_SR10 0x05
+#define SFF_8636_ETHERNET_100G_CWDM4_FEC 0x06
+#define SFF_8636_ETHERNET_100G_PSM4 0x07
+#define SFF_8636_ETHERNET_100G_ACC 0x08
+#define SFF_8636_ETHERNET_100G_CWDM4_NO_FEC 0x09
+#define SFF_8636_ETHERNET_100G_RSVD1 0x0A
+#define SFF_8636_ETHERNET_100G_CR4 0x0B
+#define SFF_8636_ETHERNET_25G_CR_CA_S 0x0C
+#define SFF_8636_ETHERNET_25G_CR_CA_N 0x0D
+#define SFF_8636_ETHERNET_40G_ER4 0x10
+#define SFF_8636_ETHERNET_4X10_SR 0x11
+#define SFF_8636_ETHERNET_40G_PSM4 0x12
+#define SFF_8636_ETHERNET_G959_P1I1_2D1 0x13
+#define SFF_8636_ETHERNET_G959_P1S1_2D2 0x14
+#define SFF_8636_ETHERNET_G959_P1L1_2D2 0x15
+#define SFF_8636_ETHERNET_10GT_SFI 0x16
+#define SFF_8636_ETHERNET_100G_CLR4 0x17
+#define SFF_8636_ETHERNET_100G_AOC2 0x18
+#define SFF_8636_ETHERNET_100G_ACC2 0x19
+
+#define SFF_8636_OPTION_2_OFFSET 0xC1
+/* Rx output amplitude */
+#define SFF_8636_O2_RX_OUTPUT_AMP (1 << 0)
+#define SFF_8636_OPTION_3_OFFSET 0xC2
+/* Rx Squelch Disable */
+#define SFF_8636_O3_RX_SQL_DSBL (1 << 3)
+/* Rx Output Disable capable */
+#define SFF_8636_O3_RX_OUTPUT_DSBL (1 << 2)
+/* Tx Squelch Disable */
+#define SFF_8636_O3_TX_SQL_DSBL (1 << 1)
+/* Tx Squelch Impl */
+#define SFF_8636_O3_TX_SQL_IMPL (1 << 0)
+#define SFF_8636_OPTION_4_OFFSET 0xC3
+/* Memory Page 02 present */
+#define SFF_8636_O4_PAGE_02_PRESENT (1 << 7)
+/* Memory Page 01 present */
+#define SFF_8636_O4_PAGE_01_PRESENT (1 << 6)
+/* Rate Select implemented */
+#define SFF_8636_O4_RATE_SELECT (1 << 5)
+/* Tx_DISABLE implemented */
+#define SFF_8636_O4_TX_DISABLE (1 << 4)
+/* Tx_FAULT implemented */
+#define SFF_8636_O4_TX_FAULT (1 << 3)
+/* Tx Squelch implemented */
+#define SFF_8636_O4_TX_SQUELCH (1 << 2)
+/* Tx Loss of Signal */
+#define SFF_8636_O4_TX_LOS (1 << 1)
+
+/* Vendor SN - 196-211 */
+#define SFF_8636_VENDOR_SN_START_OFFSET 0xC4
+#define SFF_8636_VENDOR_SN_END_OFFSET 0xD3
+
+/* Vendor Date - 212-219 */
+#define SFF_8636_DATE_YEAR_OFFSET 0xD4
+#define SFF_8636_DATE_YEAR_LEN 2
+#define SFF_8636_DATE_MONTH_OFFSET 0xD6
+#define SFF_8636_DATE_MONTH_LEN 2
+#define SFF_8636_DATE_DAY_OFFSET 0xD8
+#define SFF_8636_DATE_DAY_LEN 2
+#define SFF_8636_DATE_VENDOR_LOT_OFFSET 0xDA
+#define SFF_8636_DATE_VENDOR_LOT_LEN 2
+
+/* Diagnostic Monitoring Type - 220 */
+#define SFF_8636_DIAG_TYPE_OFFSET 0xDC
+#define SFF_8636_RX_PWR_TYPE_MASK 0x8
+#define SFF_8636_RX_PWR_TYPE_AVG_PWR (1 << 3)
+#define SFF_8636_RX_PWR_TYPE_OMA (0 << 3)
+#define SFF_8636_TX_PWR_TYPE_MASK 0x4
+#define SFF_8636_TX_PWR_TYPE_AVG_PWR (1 << 2)
+
+/* Enhanced Options - 221 */
+#define SFF_8636_ENH_OPTIONS_OFFSET 0xDD
+#define SFF_8636_RATE_SELECT_EXT_SUPPORT (1 << 3)
+#define SFF_8636_RATE_SELECT_APP_TABLE_SUPPORT (1 << 2)
+
+/* Check code - 223 */
+#define SFF_8636_CC_EXT_OFFSET 0xDF
+#define SFF_8636_CC_EXT_LEN 1
+
+/*------------------------------------------------------------------------------
+ *
+ * Upper Memory Page 03h
+ * Contains module thresholds, channel thresholds and masks,
+ * and optional channel controls
+ *
+ * Offset - Page Num(3) * PageSize(0x80) + Page offset
+ */
+
+/* Module Thresholds (48 Bytes) 128-175 */
+/* MSB at low address, LSB at high address */
+#define SFF_8636_TEMP_HALRM 0x200
+#define SFF_8636_TEMP_LALRM 0x202
+#define SFF_8636_TEMP_HWARN 0x204
+#define SFF_8636_TEMP_LWARN 0x206
+
+#define SFF_8636_VCC_HALRM 0x210
+#define SFF_8636_VCC_LALRM 0x212
+#define SFF_8636_VCC_HWARN 0x214
+#define SFF_8636_VCC_LWARN 0x216
+
+#define SFF_8636_RX_PWR_HALRM 0x230
+#define SFF_8636_RX_PWR_LALRM 0x232
+#define SFF_8636_RX_PWR_HWARN 0x234
+#define SFF_8636_RX_PWR_LWARN 0x236
+
+#define SFF_8636_TX_BIAS_HALRM 0x238
+#define SFF_8636_TX_BIAS_LALRM 0x23A
+#define SFF_8636_TX_BIAS_HWARN 0x23C
+#define SFF_8636_TX_BIAS_LWARN 0x23E
+
+#define SFF_8636_TX_PWR_HALRM 0x240
+#define SFF_8636_TX_PWR_LALRM 0x242
+#define SFF_8636_TX_PWR_HWARN 0x244
+#define SFF_8636_TX_PWR_LWARN 0x246
+
+#define ETH_MODULE_SFF_8636_MAX_LEN 640
+#define ETH_MODULE_SFF_8436_MAX_LEN 640
+
+#endif /*SFF_8636_H__ */
diff --git a/app/test-pmd/sff_common.c b/app/test-pmd/sff_common.c
new file mode 100644
index 0000000000..f0433d9c8c
--- /dev/null
+++ b/app/test-pmd/sff_common.c
@@ -0,0 +1,296 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2022 Intel Corporation
+ *
+ * Implements SFF-8024 Rev 4.0 of pluggable I/O configuration
+ *
+ * Common utilities for SFF-8436/8636 and SFF-8472/8079
+ *
+ */
+
+#include <stdio.h>
+#include <math.h>
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+#include <rte_flow.h>
+#include "sff_common.h"
+#include "testpmd.h"
+
+
+double convert_mw_to_dbm(double mw)
+{
+ return (10. * log10(mw / 1000.)) + 30.;
+}
+
+void sff_show_value_with_unit(const uint8_t *id, unsigned int reg,
+ const char *name, unsigned int mult,
+ const char *unit)
+{
+ unsigned int val = id[reg];
+
+ printf("%-41s : %u%s\n", name, val * mult, unit);
+}
+
+void sff_show_ascii(const uint8_t *id, unsigned int first_reg,
+ unsigned int last_reg, const char *name)
+{
+ unsigned int reg, val;
+
+ printf("%-41s : ", name);
+ while (first_reg <= last_reg && id[last_reg] == ' ')
+ last_reg--;
+ for (reg = first_reg; reg <= last_reg; reg++) {
+ val = id[reg];
+ putchar(((val >= 32) && (val <= 126)) ? val : '_');
+ }
+ printf("\n");
+}
+
+void sff_8024_show_oui(const uint8_t *id, int id_offset)
+{
+ printf("%-41s : %02x:%02x:%02x\n", "Vendor OUI",
+ id[id_offset], id[(id_offset) + 1],
+ id[(id_offset) + 2]);
+}
+
+void sff_8024_show_identifier(const uint8_t *id, int id_offset)
+{
+ printf("%-41s : 0x%02x", "Identifier", id[id_offset]);
+ switch (id[id_offset]) {
+ case SFF_8024_ID_UNKNOWN:
+ printf(" (no module present, unknown, or unspecified)\n");
+ break;
+ case SFF_8024_ID_GBIC:
+ printf(" (GBIC)\n");
+ break;
+ case SFF_8024_ID_SOLDERED_MODULE:
+ printf(" (module soldered to motherboard)\n");
+ break;
+ case SFF_8024_ID_SFP:
+ printf(" (SFP)\n");
+ break;
+ case SFF_8024_ID_300_PIN_XBI:
+ printf(" (300 pin XBI)\n");
+ break;
+ case SFF_8024_ID_XENPAK:
+ printf(" (XENPAK)\n");
+ break;
+ case SFF_8024_ID_XFP:
+ printf(" (XFP)\n");
+ break;
+ case SFF_8024_ID_XFF:
+ printf(" (XFF)\n");
+ break;
+ case SFF_8024_ID_XFP_E:
+ printf(" (XFP-E)\n");
+ break;
+ case SFF_8024_ID_XPAK:
+ printf(" (XPAK)\n");
+ break;
+ case SFF_8024_ID_X2:
+ printf(" (X2)\n");
+ break;
+ case SFF_8024_ID_DWDM_SFP:
+ printf(" (DWDM-SFP)\n");
+ break;
+ case SFF_8024_ID_QSFP:
+ printf(" (QSFP)\n");
+ break;
+ case SFF_8024_ID_QSFP_PLUS:
+ printf(" (QSFP+)\n");
+ break;
+ case SFF_8024_ID_CXP:
+ printf(" (CXP)\n");
+ break;
+ case SFF_8024_ID_HD4X:
+ printf(" (Shielded Mini Multilane HD 4X)\n");
+ break;
+ case SFF_8024_ID_HD8X:
+ printf(" (Shielded Mini Multilane HD 8X)\n");
+ break;
+ case SFF_8024_ID_QSFP28:
+ printf(" (QSFP28)\n");
+ break;
+ case SFF_8024_ID_CXP2:
+ printf(" (CXP2/CXP28)\n");
+ break;
+ case SFF_8024_ID_CDFP:
+ printf(" (CDFP Style 1/Style 2)\n");
+ break;
+ case SFF_8024_ID_HD4X_FANOUT:
+ printf(" (Shielded Mini Multilane HD 4X Fanout Cable)\n");
+ break;
+ case SFF_8024_ID_HD8X_FANOUT:
+ printf(" (Shielded Mini Multilane HD 8X Fanout Cable)\n");
+ break;
+ case SFF_8024_ID_CDFP_S3:
+ printf(" (CDFP Style 3)\n");
+ break;
+ case SFF_8024_ID_MICRO_QSFP:
+ printf(" (microQSFP)\n");
+ break;
+ default:
+ printf(" (reserved or unknown)\n");
+ break;
+ }
+}
+
+void sff_8024_show_connector(const uint8_t *id, int ctor_offset)
+{
+ printf("%-41s : 0x%02x", "Connector", id[ctor_offset]);
+ switch (id[ctor_offset]) {
+ case SFF_8024_CTOR_UNKNOWN:
+ printf(" (unknown or unspecified)\n");
+ break;
+ case SFF_8024_CTOR_SC:
+ printf(" (SC)\n");
+ break;
+ case SFF_8024_CTOR_FC_STYLE_1:
+ printf(" (Fibre Channel Style 1 copper)\n");
+ break;
+ case SFF_8024_CTOR_FC_STYLE_2:
+ printf(" (Fibre Channel Style 2 copper)\n");
+ break;
+ case SFF_8024_CTOR_BNC_TNC:
+ printf(" (BNC/TNC)\n");
+ break;
+ case SFF_8024_CTOR_FC_COAX:
+ printf(" (Fibre Channel coaxial headers)\n");
+ break;
+ case SFF_8024_CTOR_FIBER_JACK:
+ printf(" (FibreJack)\n");
+ break;
+ case SFF_8024_CTOR_LC:
+ printf(" (LC)\n");
+ break;
+ case SFF_8024_CTOR_MT_RJ:
+ printf(" (MT-RJ)\n");
+ break;
+ case SFF_8024_CTOR_MU:
+ printf(" (MU)\n");
+ break;
+ case SFF_8024_CTOR_SG:
+ printf(" (SG)\n");
+ break;
+ case SFF_8024_CTOR_OPT_PT:
+ printf(" (Optical pigtail)\n");
+ break;
+ case SFF_8024_CTOR_MPO:
+ printf(" (MPO Parallel Optic)\n");
+ break;
+ case SFF_8024_CTOR_MPO_2:
+ printf(" (MPO Parallel Optic - 2x16)\n");
+ break;
+ case SFF_8024_CTOR_HSDC_II:
+ printf(" (HSSDC II)\n");
+ break;
+ case SFF_8024_CTOR_COPPER_PT:
+ printf(" (Copper pigtail)\n");
+ break;
+ case SFF_8024_CTOR_RJ45:
+ printf(" (RJ45)\n");
+ break;
+ case SFF_8024_CTOR_NO_SEPARABLE:
+ printf(" (No separable connector)\n");
+ break;
+ case SFF_8024_CTOR_MXC_2x16:
+ printf(" (MXC 2x16)\n");
+ break;
+ default:
+ printf(" (reserved or unknown)\n");
+ break;
+ }
+}
+
+void sff_8024_show_encoding(const uint8_t *id, int encoding_offset, int
sff_type)
+{
+ printf("%-41s : 0x%02x", "Encoding", id[encoding_offset]);
+ switch (id[encoding_offset]) {
+ case SFF_8024_ENCODING_UNSPEC:
+ printf(" (unspecified)\n");
+ break;
+ case SFF_8024_ENCODING_8B10B:
+ printf(" (8B/10B)\n");
+ break;
+ case SFF_8024_ENCODING_4B5B:
+ printf(" (4B/5B)\n");
+ break;
+ case SFF_8024_ENCODING_NRZ:
+ printf(" (NRZ)\n");
+ break;
+ case SFF_8024_ENCODING_4h:
+ if (sff_type == RTE_ETH_MODULE_SFF_8472)
+ printf(" (Manchester)\n");
+ else if (sff_type == RTE_ETH_MODULE_SFF_8636)
+ printf(" (SONET Scrambled)\n");
+ break;
+ case SFF_8024_ENCODING_5h:
+ if (sff_type == RTE_ETH_MODULE_SFF_8472)
+ printf(" (SONET Scrambled)\n");
+ else if (sff_type == RTE_ETH_MODULE_SFF_8636)
+ printf(" (64B/66B)\n");
+ break;
+ case SFF_8024_ENCODING_6h:
+ if (sff_type == RTE_ETH_MODULE_SFF_8472)
+ printf(" (64B/66B)\n");
+ else if (sff_type == RTE_ETH_MODULE_SFF_8636)
+ printf(" (Manchester)\n");
+ break;
+ case SFF_8024_ENCODING_256B:
+ printf(" ((256B/257B (transcoded FEC-enabled data))\n");
+ break;
+ case SFF_8024_ENCODING_PAM4:
+ printf(" (PAM4)\n");
+ break;
+ default:
+ printf(" (reserved or unknown)\n");
+ break;
+ }
+}
+
+void sff_show_thresholds(struct sff_diags sd)
+{
+ PRINT_BIAS("Laser bias current high alarm threshold",
+ sd.bias_cur[HALRM]);
+ PRINT_BIAS("Laser bias current low alarm threshold",
+ sd.bias_cur[LALRM]);
+ PRINT_BIAS("Laser bias current high warning threshold",
+ sd.bias_cur[HWARN]);
+ PRINT_BIAS("Laser bias current low warning threshold",
+ sd.bias_cur[LWARN]);
+
+ PRINT_xX_PWR("Laser output power high alarm threshold",
+ sd.tx_power[HALRM]);
+ PRINT_xX_PWR("Laser output power low alarm threshold",
+ sd.tx_power[LALRM]);
+ PRINT_xX_PWR("Laser output power high warning threshold",
+ sd.tx_power[HWARN]);
+ PRINT_xX_PWR("Laser output power low warning threshold",
+ sd.tx_power[LWARN]);
+
+ PRINT_TEMP("Module temperature high alarm threshold",
+ sd.sfp_temp[HALRM]);
+ PRINT_TEMP("Module temperature low alarm threshold",
+ sd.sfp_temp[LALRM]);
+ PRINT_TEMP("Module temperature high warning threshold",
+ sd.sfp_temp[HWARN]);
+ PRINT_TEMP("Module temperature low warning threshold",
+ sd.sfp_temp[LWARN]);
+
+ PRINT_VCC("Module voltage high alarm threshold",
+ sd.sfp_voltage[HALRM]);
+ PRINT_VCC("Module voltage low alarm threshold",
+ sd.sfp_voltage[LALRM]);
+ PRINT_VCC("Module voltage high warning threshold",
+ sd.sfp_voltage[HWARN]);
+ PRINT_VCC("Module voltage low warning threshold",
+ sd.sfp_voltage[LWARN]);
+
+ PRINT_xX_PWR("Laser rx power high alarm threshold",
+ sd.rx_power[HALRM]);
+ PRINT_xX_PWR("Laser rx power low alarm threshold",
+ sd.rx_power[LALRM]);
+ PRINT_xX_PWR("Laser rx power high warning threshold",
+ sd.rx_power[HWARN]);
+ PRINT_xX_PWR("Laser rx power low warning threshold",
+ sd.rx_power[LWARN]);
+}
diff --git a/app/test-pmd/sff_common.h b/app/test-pmd/sff_common.h
new file mode 100644
index 0000000000..0b708a9a7a
--- /dev/null
+++ b/app/test-pmd/sff_common.h
@@ -0,0 +1,178 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2022 Intel Corporation
+ *
+ * Implements SFF-8024 Rev 4.0 of pluggable I/O configuration
+ *
+ * Common utilities for SFF-8436/8636 and SFF-8472/8079
+ *
+ */
+
+#ifndef SFF_COMMON_H__
+#define SFF_COMMON_H__
+
+#include <stdio.h>
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+#include <rte_flow.h>
+
+#define SFF_8024_ID_OFFSET 0x00
+#define SFF_8024_ID_UNKNOWN 0x00
+#define SFF_8024_ID_GBIC 0x01
+#define SFF_8024_ID_SOLDERED_MODULE 0x02
+#define SFF_8024_ID_SFP 0x03
+#define SFF_8024_ID_300_PIN_XBI 0x04
+#define SFF_8024_ID_XENPAK 0x05
+#define SFF_8024_ID_XFP 0x06
+#define SFF_8024_ID_XFF 0x07
+#define SFF_8024_ID_XFP_E 0x08
+#define SFF_8024_ID_XPAK 0x09
+#define SFF_8024_ID_X2 0x0A
+#define SFF_8024_ID_DWDM_SFP 0x0B
+#define SFF_8024_ID_QSFP 0x0C
+#define SFF_8024_ID_QSFP_PLUS 0x0D
+#define SFF_8024_ID_CXP 0x0E
+#define SFF_8024_ID_HD4X 0x0F
+#define SFF_8024_ID_HD8X 0x10
+#define SFF_8024_ID_QSFP28 0x11
+#define SFF_8024_ID_CXP2 0x12
+#define SFF_8024_ID_CDFP 0x13
+#define SFF_8024_ID_HD4X_FANOUT 0x14
+#define SFF_8024_ID_HD8X_FANOUT 0x15
+#define SFF_8024_ID_CDFP_S3 0x16
+#define SFF_8024_ID_MICRO_QSFP 0x17
+#define SFF_8024_ID_LAST SFF_8024_ID_MICRO_QSFP
+#define SFF_8024_ID_UNALLOCATED_LAST 0x7F
+#define SFF_8024_ID_VENDOR_START 0x80
+#define SFF_8024_ID_VENDOR_LAST 0xFF
+
+#define SFF_8024_CTOR_UNKNOWN 0x00
+#define SFF_8024_CTOR_SC 0x01
+#define SFF_8024_CTOR_FC_STYLE_1 0x02
+#define SFF_8024_CTOR_FC_STYLE_2 0x03
+#define SFF_8024_CTOR_BNC_TNC 0x04
+#define SFF_8024_CTOR_FC_COAX 0x05
+#define SFF_8024_CTOR_FIBER_JACK 0x06
+#define SFF_8024_CTOR_LC 0x07
+#define SFF_8024_CTOR_MT_RJ 0x08
+#define SFF_8024_CTOR_MU 0x09
+#define SFF_8024_CTOR_SG 0x0A
+#define SFF_8024_CTOR_OPT_PT 0x0B
+#define SFF_8024_CTOR_MPO 0x0C
+#define SFF_8024_CTOR_MPO_2 0x0D
+/* 0E-1Fh --- Reserved */
+#define SFF_8024_CTOR_HSDC_II 0x20
+#define SFF_8024_CTOR_COPPER_PT 0x21
+#define SFF_8024_CTOR_RJ45 0x22
+#define SFF_8024_CTOR_NO_SEPARABLE 0x23
+#define SFF_8024_CTOR_MXC_2x16 0x24
+#define SFF_8024_CTOR_LAST SFF_8024_CTOR_MXC_2x16
+#define SFF_8024_CTOR_UNALLOCATED_LAST 0x7F
+#define SFF_8024_CTOR_VENDOR_START 0x80
+#define SFF_8024_CTOR_VENDOR_LAST 0xFF
+
+/* ENCODING Values */
+#define SFF_8024_ENCODING_UNSPEC 0x00
+#define SFF_8024_ENCODING_8B10B 0x01
+#define SFF_8024_ENCODING_4B5B 0x02
+#define SFF_8024_ENCODING_NRZ 0x03
+/*
+ * Value: 04h
+ * SFF-8472 - Manchester
+ * SFF-8436/8636 - SONET Scrambled
+ */
+#define SFF_8024_ENCODING_4h 0x04
+/*
+ * Value: 05h
+ * SFF-8472 - SONET Scrambled
+ * SFF-8436/8636 - 64B/66B
+ */
+#define SFF_8024_ENCODING_5h 0x05
+/*
+ * Value: 06h
+ * SFF-8472 - 64B/66B
+ * SFF-8436/8636 - Manchester
+ */
+#define SFF_8024_ENCODING_6h 0x06
+#define SFF_8024_ENCODING_256B 0x07
+#define SFF_8024_ENCODING_PAM4 0x08
+
+/* Most common case: 16-bit unsigned integer in a certain unit */
+#define OFFSET_TO_U16(offset) \
+ (id[offset] << 8 | id[(offset) + 1])
+
+# define PRINT_xX_PWR(string, var) \
+ printf("%-41s : %.4f mW / %.2f dBm\n", (string), \
+ (double)((var) / 10000.), \
+ convert_mw_to_dbm((double)((var) / 10000.)))
+
+#define PRINT_BIAS(string, bias_cur) \
+ printf("%-41s : %.3f mA\n", (string), \
+ (double)(bias_cur / 500.))
+
+#define PRINT_TEMP(string, temp) \
+ printf("%-41s : %.2f degrees C / %.2f degrees F\n", \
+ (string), (double)(temp / 256.), \
+ (double)(temp / 256. * 1.8 + 32.))
+
+#define PRINT_VCC(string, sfp_voltage) \
+ printf("%-41s : %.4f V\n", (string), \
+ (double)(sfp_voltage / 10000.))
+
+# define PRINT_xX_THRESH_PWR(string, var, index) \
+ PRINT_xX_PWR(string, (var)[(index)])
+
+/* Channel Monitoring Fields */
+struct sff_channel_diags {
+ uint16_t bias_cur; /* Measured bias current in 2uA units */
+ uint16_t rx_power; /* Measured RX Power */
+ uint16_t tx_power; /* Measured TX Power */
+};
+
+/* Module Monitoring Fields */
+struct sff_diags {
+
+#define MAX_CHANNEL_NUM 4
+#define LWARN 0
+#define HWARN 1
+#define LALRM 2
+#define HALRM 3
+#define MCURR 4
+
+ /* Supports DOM */
+ uint8_t supports_dom;
+ /* Supports alarm/warning thold */
+ uint8_t supports_alarms;
+ /* RX Power: 0 = OMA, 1 = Average power */
+ uint8_t rx_power_type;
+ /* TX Power: 0 = Not supported, 1 = Average power */
+ uint8_t tx_power_type;
+
+ uint8_t calibrated_ext; /* Is externally calibrated */
+ /* [5] tables are low/high warn, low/high alarm, current */
+ /* SFP voltage in 0.1mV units */
+ uint16_t sfp_voltage[5];
+ /* SFP Temp in 16-bit signed 1/256 Celcius */
+ int16_t sfp_temp[5];
+ /* Measured bias current in 2uA units */
+ uint16_t bias_cur[5];
+ /* Measured TX Power */
+ uint16_t tx_power[5];
+ /* Measured RX Power */
+ uint16_t rx_power[5];
+ struct sff_channel_diags scd[MAX_CHANNEL_NUM];
+};
+
+double convert_mw_to_dbm(double mw);
+void sff_show_value_with_unit(const uint8_t *id, unsigned int reg,
+ const char *name, unsigned int mult,
+ const char *unit);
+void sff_show_ascii(const uint8_t *id, unsigned int first_reg,
+ unsigned int last_reg, const char *name);
+void sff_show_thresholds(struct sff_diags sd);
+
+void sff_8024_show_oui(const uint8_t *id, int id_offset);
+void sff_8024_show_identifier(const uint8_t *id, int id_offset);
+void sff_8024_show_connector(const uint8_t *id, int ctor_offset);
+void sff_8024_show_encoding(const uint8_t *id, int encoding_offset, int
sff_type);
+
+#endif /* SFF_COMMON_H__ */
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 9967825044..eabcca21ea 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -72,6 +72,8 @@
#define NUMA_NO_CONFIG 0xFF
#define UMA_NO_CONFIG 0xFF
+#define ARRAY_SIZE(arr) RTE_DIM(arr)
+
typedef uint8_t lcoreid_t;
typedef uint16_t portid_t;
typedef uint16_t queueid_t;
@@ -850,7 +852,7 @@ void device_infos_display(const char *identifier);
void port_infos_display(portid_t port_id);
void port_summary_display(portid_t port_id);
void port_eeprom_display(portid_t port_id);
-void port_module_eeprom_display(portid_t port_id);
+void port_module_eeprom_display(portid_t port_id, uint8_t hex_on);
void port_summary_header_display(void);
void rx_queue_infos_display(portid_t port_idi, uint16_t queue_id);
void tx_queue_infos_display(portid_t port_idi, uint16_t queue_id);
@@ -1039,6 +1041,15 @@ int eth_macaddr_get_print_err(uint16_t port_id,
void show_macs(portid_t port_id);
void show_mcast_macs(portid_t port_id);
+/* SFF-8079 Optics diagnostics */
+extern void sff_8079_show_all(const uint8_t *id);
+
+/* SFF-8472 Optics diagnostics */
+extern void sff_8472_show_all(const uint8_t *id);
+
+/* SFF-8636 Optics diagnostics */
+extern void sff_8636_show_all(const uint8_t *id, uint32_t eeprom_len);
+
/* Functions to manage the set of filtered Multicast MAC addresses */
void mcast_addr_add(portid_t port_id, struct rte_ether_addr *mc_addr);
void mcast_addr_remove(portid_t port_id, struct rte_ether_addr *mc_addr);
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 9cc248084f..ffcb87d03e 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -214,12 +214,19 @@ For example:
nvgre
vxlan-gpe
-show port (module_eeprom|eeprom)
+show port eeprom
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Display the EEPROM information of a port::
- testpmd> show port (port_id) (module_eeprom|eeprom)
+ testpmd> show port (port_id) eeprom
+
+show port module_eeprom (format|hex)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Display the module EEPROM with specific format or hex dump of a port::
+
+ testpmd> show port (port_id) module_eeprom (format|hex)
show port rss reta
~~~~~~~~~~~~~~~~~~
--
2.25.1
