On 18/03/2015 12:01, Sergio Gonzalez Monroy wrote:
> This patch adds the handle function for the LPE mailbox message (VF to
> PF) to set maximum packet size, which can be used to enable jumbo
> frame support.
>
> Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy at intel.com>
> ---
> lib/librte_pmd_e1000/igb_pf.c | 28 ++++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/lib/librte_pmd_e1000/igb_pf.c b/lib/librte_pmd_e1000/igb_pf.c
> index bc3816a..2d49379 100644
> --- a/lib/librte_pmd_e1000/igb_pf.c
> +++ b/lib/librte_pmd_e1000/igb_pf.c
> @@ -395,6 +395,31 @@ igb_vf_set_vlan(struct rte_eth_dev *dev, uint32_t vf,
> uint32_t *msgbuf)
> }
>
> static int
> +igb_vf_set_rlpml(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
> +{
> + struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> + uint16_t rlpml = msgbuf[1] & E1000_VMOLR_RLPML_MASK;
> + uint32_t max_frame = rlpml + ETHER_HDR_LEN + ETHER_CRC_LEN;
> + uint32_t vmolr;
> +
> + if ((max_frame < ETHER_MIN_LEN) || (max_frame >
> ETHER_MAX_JUMBO_FRAME_LEN))
> + return -1;
> +
> + vmolr = E1000_READ_REG(hw, E1000_VMOLR(vf));
> +
> + vmolr &= ~E1000_VMOLR_RLPML_MASK;
> + vmolr |= rlpml;
> +
> + /* Enable Long Packet support */
> + vmolr |= E1000_VMOLR_LPE;
> +
> + E1000_WRITE_REG(hw, E1000_VMOLR(vf), vmolr);
> + E1000_WRITE_FLUSH(hw);
> +
> + return 0;
> +}
> +
> +static int
> igb_rcv_msg_from_vf(struct rte_eth_dev *dev, uint16_t vf)
> {
> uint16_t mbx_size = E1000_VFMAILBOX_SIZE;
> @@ -428,6 +453,9 @@ igb_rcv_msg_from_vf(struct rte_eth_dev *dev, uint16_t vf)
> case E1000_VF_SET_MULTICAST:
> retval = igb_vf_set_multicast(dev, vf, msgbuf);
> break;
> + case E1000_VF_SET_LPE:
> + retval = igb_vf_set_rlpml(dev, vf, msgbuf);
> + break;
> case E1000_VF_SET_VLAN:
> retval = igb_vf_set_vlan(dev, vf, msgbuf);
> break;
This patch is targeting 2.1 release.
Sergio
