Add API for enabling direct re-arm mode and for mapping RX and TX
queues. Currently, the API supports 1:1(txq : rxq) mapping.
Suggested-by: Honnappa Nagarahalli <honnappa.nagaraha...@arm.com>
Signed-off-by: Feifei Wang <feifei.wa...@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.w...@arm.com>
---
lib/ethdev/ethdev_driver.h | 15 +++++++++++++++
lib/ethdev/rte_ethdev.c | 14 ++++++++++++++
lib/ethdev/rte_ethdev.h | 31 +++++++++++++++++++++++++++++++
lib/ethdev/version.map | 3 +++
4 files changed, 63 insertions(+)
diff --git a/lib/ethdev/ethdev_driver.h b/lib/ethdev/ethdev_driver.h
index d95605a355..87bb287a3f 100644
--- a/lib/ethdev/ethdev_driver.h
+++ b/lib/ethdev/ethdev_driver.h
@@ -476,6 +476,16 @@ typedef int (*eth_rx_enable_intr_t)(struct rte_eth_dev
*dev,
typedef int (*eth_rx_disable_intr_t)(struct rte_eth_dev *dev,
uint16_t rx_queue_id);
+/** @internal Enable direct rearm of a receive queue of an Ethernet device. */
+typedef int (*eth_rx_direct_rearm_enable_t)(struct rte_eth_dev *dev,
+ uint16_t queue_id);
+
+/**< @internal map Rx/Tx queue of direct rearm mode */
+typedef int (*eth_rx_direct_rearm_map_t)(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id,
+ uint16_t tx_port_id,
+ uint16_t tx_queue_id);
+
/** @internal Release memory resources allocated by given Rx/Tx queue. */
typedef void (*eth_queue_release_t)(struct rte_eth_dev *dev,
uint16_t queue_id);
@@ -1069,6 +1079,11 @@ struct eth_dev_ops {
/** Disable Rx queue interrupt */
eth_rx_disable_intr_t rx_queue_intr_disable;
+ /** Enable Rx queue direct rearm mode */
+ eth_rx_direct_rearm_enable_t rx_queue_direct_rearm_enable;
+ /** Map Rx/Tx queue for direct rearm mode */
+ eth_rx_direct_rearm_map_t rx_queue_direct_rearm_map;
+
eth_tx_queue_setup_t tx_queue_setup;/**< Set up device Tx queue */
eth_queue_release_t tx_queue_release; /**< Release Tx queue */
eth_tx_done_cleanup_t tx_done_cleanup;/**< Free Tx ring mbufs */
diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
index a1d475a292..fd13e1af41 100644
--- a/lib/ethdev/rte_ethdev.c
+++ b/lib/ethdev/rte_ethdev.c
@@ -2485,6 +2485,20 @@ rte_eth_tx_hairpin_queue_setup(uint16_t port_id,
uint16_t tx_queue_id,
return eth_err(port_id, ret);
}
+int
+rte_eth_direct_rxrearm_map(uint16_t rx_port_id, uint16_t rx_queue_id,
+ uint16_t tx_port_id, uint16_t tx_queue_id)
+{
+ struct rte_eth_dev *dev;
+
+ dev = &rte_eth_devices[rx_port_id];
+ (*dev->dev_ops->rx_queue_direct_rearm_enable)(dev, rx_queue_id);
+ (*dev->dev_ops->rx_queue_direct_rearm_map)(dev, rx_queue_id,
+ tx_port_id, tx_queue_id);
+
+ return 0;
+}
+
int
rte_eth_hairpin_bind(uint16_t tx_port, uint16_t rx_port)
{
diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
index fa299c8ad7..6a94dc4af4 100644
--- a/lib/ethdev/rte_ethdev.h
+++ b/lib/ethdev/rte_ethdev.h
@@ -5073,6 +5073,37 @@ __rte_experimental
int rte_eth_dev_hairpin_capability_get(uint16_t port_id,
struct rte_eth_hairpin_cap *cap);
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Enable direct re-arm mode. In this mode the RX queue will be re-armed using
+ * buffers that have completed transmission on the transmit side.
+ *
+ * @note
+ * It is assumed that the buffers have completed transmission belong to the
+ * mempool used at the receive side, and have refcnt = 1.
+ *
+ * @param rx_port_id
+ * Port identifying the receive side.
+ * @param rx_queue_id
+ * The index of the receive queue identifying the receive side.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param tx_port_id
+ * Port identifying the transmit side.
+ * @param tx_queue_id
+ * The index of the transmit queue identifying the transmit side.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ *
+ * @return
+ * - (0) if successful.
+ */
+__rte_experimental
+int rte_eth_direct_rxrearm_map(uint16_t rx_port_id, uint16_t rx_queue_id,
+ uint16_t tx_port_id, uint16_t tx_queue_id);
+
/**
* @warning
* @b EXPERIMENTAL: this structure may change without prior notice.
diff --git a/lib/ethdev/version.map b/lib/ethdev/version.map
index c2fb0669a4..6540f08698 100644
--- a/lib/ethdev/version.map
+++ b/lib/ethdev/version.map
@@ -256,6 +256,9 @@ EXPERIMENTAL {
rte_flow_flex_item_create;
rte_flow_flex_item_release;
rte_flow_pick_transfer_proxy;
+
+ # added in 22.02
+ rte_eth_direct_rxrearm_map;
};
INTERNAL {
--
2.25.1
