>On Sun, Oct 3, 2021 at 10:25 PM <pbhagavat...@marvell.com> wrote: >> >> From: Pavan Nikhilesh <pbhagavat...@marvell.com> >> >> The l3fwd example should use the reserved IPv4/v6 reserved address >> ranges defined in RFC5735, RFC5180 and RFC863 discard protocol for >> the port number in the exact match mode of L3 forwarding. >> >> Signed-off-by: Pavan Nikhilesh <pbhagavat...@marvell.com> >> --- >> doc/guides/rel_notes/release_21_11.rst | 6 ++ >> examples/l3fwd/l3fwd.h | 2 +- >> examples/l3fwd/l3fwd_em.c | 142 ++++++++++++------------- >> 3 files changed, 73 insertions(+), 77 deletions(-) >> >> diff --git a/doc/guides/rel_notes/release_21_11.rst >b/doc/guides/rel_notes/release_21_11.rst >> index 37dc1a7786..ccdfa47baa 100644 >> --- a/doc/guides/rel_notes/release_21_11.rst >> +++ b/doc/guides/rel_notes/release_21_11.rst >> @@ -125,6 +125,12 @@ New Features >> * Added tests to validate packets hard expiry. >> * Added tests to verify tunnel header verification in IPsec inbound. >> >> +* **Increase number of routes configured in l3fwd lpm, em and fib >lookups.** >> + >> + * Increase number of routes from 8 to 16 for all lookup modes of >l3fwd, this >> + helps in validating SoC with more than 8 ethernet devices using >l3fwd. > >It should be in patch1. >
Ack. > >> + * Update EM mode to use RFC2544 reserved IP address space. >> + >> >> Removed Items >> ------------- >> diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h >> index a808d60247..853a31d4c2 100644 >> --- a/examples/l3fwd/l3fwd.h >> +++ b/examples/l3fwd/l3fwd.h >> @@ -54,7 +54,7 @@ >> /* 32-bit has less address-space for hugepage memory, limit to 1M >entries */ >> #define L3FWD_HASH_ENTRIES (1024*1024*1) >> #endif >> -#define HASH_ENTRY_NUMBER_DEFAULT 4 >> +#define HASH_ENTRY_NUMBER_DEFAULT 16 >> >> struct mbuf_table { >> uint16_t len; >> diff --git a/examples/l3fwd/l3fwd_em.c >b/examples/l3fwd/l3fwd_em.c >> index 2a8ab6aab5..92998e26b2 100644 >> --- a/examples/l3fwd/l3fwd_em.c >> +++ b/examples/l3fwd/l3fwd_em.c >> @@ -99,33 +99,64 @@ struct ipv6_l3fwd_em_route { >> uint8_t if_out; >> }; >> >> -static struct ipv4_l3fwd_em_route ipv4_l3fwd_em_route_array[] = { >> - {{RTE_IPV4(101, 0, 0, 0), RTE_IPV4(100, 10, 0, 1), 101, 11, >IPPROTO_TCP}, 0}, >> - {{RTE_IPV4(201, 0, 0, 0), RTE_IPV4(200, 20, 0, 1), 102, 12, >IPPROTO_TCP}, 1}, >> - {{RTE_IPV4(111, 0, 0, 0), RTE_IPV4(100, 30, 0, 1), 101, 11, >IPPROTO_TCP}, 2}, >> - {{RTE_IPV4(211, 0, 0, 0), RTE_IPV4(200, 40, 0, 1), 102, 12, >IPPROTO_TCP}, 3}, >> +/* 198.18.0.0/16 are set aside for RFC2544 benchmarking (RFC5735). >> + * Use RFC863 Discard Protocol. >> + */ >> +static const struct ipv4_l3fwd_em_route >ipv4_l3fwd_em_route_array[] = { >> + {{RTE_IPV4(198, 18, 0, 0), RTE_IPV4(198, 18, 0, 1), 9, 9, >IPPROTO_UDP}, 0}, >> + {{RTE_IPV4(198, 18, 1, 0), RTE_IPV4(198, 18, 1, 1), 9, 9, >IPPROTO_UDP}, 1}, >> + {{RTE_IPV4(198, 18, 2, 0), RTE_IPV4(198, 18, 2, 1), 9, 9, >IPPROTO_UDP}, 2}, >> + {{RTE_IPV4(198, 18, 3, 0), RTE_IPV4(198, 18, 3, 1), 9, 9, >IPPROTO_UDP}, 3}, >> + {{RTE_IPV4(198, 18, 4, 0), RTE_IPV4(198, 18, 4, 1), 9, 9, >IPPROTO_UDP}, 4}, >> + {{RTE_IPV4(198, 18, 5, 0), RTE_IPV4(198, 18, 5, 1), 9, 9, >IPPROTO_UDP}, 5}, >> + {{RTE_IPV4(198, 18, 6, 0), RTE_IPV4(198, 18, 6, 1), 9, 9, >IPPROTO_UDP}, 6}, >> + {{RTE_IPV4(198, 18, 7, 0), RTE_IPV4(198, 18, 7, 1), 9, 9, >IPPROTO_UDP}, 7}, >> + {{RTE_IPV4(198, 18, 8, 0), RTE_IPV4(198, 18, 8, 1), 9, 9, >IPPROTO_UDP}, 8}, >> + {{RTE_IPV4(198, 18, 9, 0), RTE_IPV4(198, 18, 9, 1), 9, 9, >IPPROTO_UDP}, 9}, >> + {{RTE_IPV4(198, 18, 10, 0), RTE_IPV4(198, 18, 10, 1), 9, 9, >IPPROTO_UDP}, 10}, >> + {{RTE_IPV4(198, 18, 11, 0), RTE_IPV4(198, 18, 11, 1), 9, 9, >IPPROTO_UDP}, 11}, >> + {{RTE_IPV4(198, 18, 12, 0), RTE_IPV4(198, 18, 12, 1), 9, 9, >IPPROTO_UDP}, 12}, >> + {{RTE_IPV4(198, 18, 13, 0), RTE_IPV4(198, 18, 13, 1), 9, 9, >IPPROTO_UDP}, 13}, >> + {{RTE_IPV4(198, 18, 14, 0), RTE_IPV4(198, 18, 14, 1), 9, 9, >IPPROTO_UDP}, 14}, >> + {{RTE_IPV4(198, 18, 15, 0), RTE_IPV4(198, 18, 15, 1), 9, 9, >IPPROTO_UDP}, 15}, >> }; >> >> -static struct ipv6_l3fwd_em_route ipv6_l3fwd_em_route_array[] = { >> - {{ >> - {0xfe, 0x80, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, >> 0}, >> - {0xfe, 0x80, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, >> 0x38, >0x05}, >> - 101, 11, IPPROTO_TCP}, 0}, >> - >> - {{ >> - {0xfe, 0x90, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, >> 0}, >> - {0xfe, 0x90, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, >> 0x38, >0x05}, >> - 102, 12, IPPROTO_TCP}, 1}, >> - >> - {{ >> - {0xfe, 0xa0, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, >> 0}, >> - {0xfe, 0xa0, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, >> 0x38, >0x05}, >> - 101, 11, IPPROTO_TCP}, 2}, >> - >> - {{ >> - {0xfe, 0xb0, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, >> 0}, >> - {0xfe, 0xb0, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, >> 0x38, >0x05}, >> - 102, 12, IPPROTO_TCP}, 3}, >> +/* 2001:0200::/48 is IANA reserved range for IPv6 benchmarking >(RFC5180). >> + * Use RFC863 Discard Protocol. >> + */ >> +static const struct ipv6_l3fwd_em_route >ipv6_l3fwd_em_route_array[] = { >> + {{{32, 1, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, >> + {32, 1, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1}, 9, 9, >> IPPROTO_UDP}, 0}, >> + {{{32, 1, 2, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0}, >> + {32, 1, 2, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1}, 9, 9, >> IPPROTO_UDP}, 1}, >> + {{{32, 1, 2, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0}, >> + {32, 1, 2, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 1}, 9, 9, >> IPPROTO_UDP}, 2}, >> + {{{32, 1, 2, 0, 0, 0, 0, 3, 0, 0, 0, 0, 0, 0, 0, 0}, >> + {32, 1, 2, 0, 0, 0, 0, 3, 0, 0, 0, 0, 0, 0, 0, 1}, 9, 9, >> IPPROTO_UDP}, 3}, >> + {{{32, 1, 2, 0, 0, 0, 0, 4, 0, 0, 0, 0, 0, 0, 0, 0}, >> + {32, 1, 2, 0, 0, 0, 0, 4, 0, 0, 0, 0, 0, 0, 0, 1}, 9, 9, >> IPPROTO_UDP}, 4}, >> + {{{32, 1, 2, 0, 0, 0, 0, 5, 0, 0, 0, 0, 0, 0, 0, 0}, >> + {32, 1, 2, 0, 0, 0, 0, 5, 0, 0, 0, 0, 0, 0, 0, 1}, 9, 9, >> IPPROTO_UDP}, 5}, >> + {{{32, 1, 2, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0}, >> + {32, 1, 2, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 1}, 9, 9, >> IPPROTO_UDP}, 6}, >> + {{{32, 1, 2, 0, 0, 0, 0, 7, 0, 0, 0, 0, 0, 0, 0, 0}, >> + {32, 1, 2, 0, 0, 0, 0, 7, 0, 0, 0, 0, 0, 0, 0, 1}, 9, 9, >> IPPROTO_UDP}, 7}, >> + {{{32, 1, 2, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0, 0}, >> + {32, 1, 2, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0, 1}, 9, 9, >> IPPROTO_UDP}, 8}, >> + {{{32, 1, 2, 0, 0, 0, 0, 9, 0, 0, 0, 0, 0, 0, 0, 0}, >> + {32, 1, 2, 0, 0, 0, 0, 9, 0, 0, 0, 0, 0, 0, 0, 1}, 9, 9, >> IPPROTO_UDP}, 9}, >> + {{{32, 1, 2, 0, 0, 0, 0, 10, 0, 0, 0, 0, 0, 0, 0, 0}, >> + {32, 1, 2, 0, 0, 0, 0, 10, 0, 0, 0, 0, 0, 0, 0, 1}, 9, 9, >> IPPROTO_UDP}, >10}, >> + {{{32, 1, 2, 0, 0, 0, 0, 11, 0, 0, 0, 0, 0, 0, 0, 0}, >> + {32, 1, 2, 0, 0, 0, 0, 11, 0, 0, 0, 0, 0, 0, 0, 1}, 9, 9, >> IPPROTO_UDP}, >11}, >> + {{{32, 1, 2, 0, 0, 0, 0, 12, 0, 0, 0, 0, 0, 0, 0, 0}, >> + {32, 1, 2, 0, 0, 0, 0, 12, 0, 0, 0, 0, 0, 0, 0, 1}, 9, 9, >> IPPROTO_UDP}, >12}, >> + {{{32, 1, 2, 0, 0, 0, 0, 13, 0, 0, 0, 0, 0, 0, 0, 0}, >> + {32, 1, 2, 0, 0, 0, 0, 13, 0, 0, 0, 0, 0, 0, 0, 1}, 9, 9, >> IPPROTO_UDP}, >13}, >> + {{{32, 1, 2, 0, 0, 0, 0, 14, 0, 0, 0, 0, 0, 0, 0, 0}, >> + {32, 1, 2, 0, 0, 0, 0, 14, 0, 0, 0, 0, 0, 0, 0, 1}, 9, 9, >> IPPROTO_UDP}, >14}, >> + {{{32, 1, 2, 0, 0, 0, 0, 15, 0, 0, 0, 0, 0, 0, 0, 0}, >> + {32, 1, 2, 0, 0, 0, 0, 15, 0, 0, 0, 0, 0, 0, 0, 1}, 9, 9, >> IPPROTO_UDP}, >15}, >> }; >> >> struct rte_hash *ipv4_l3fwd_em_lookup_struct[NB_SOCKETS]; >> @@ -405,7 +436,7 @@ populate_ipv6_few_flow_into_table(const >struct rte_hash *h) >> (uint64_t)IPV6_L3FWD_EM_NUM_ROUTES); >> } >> >> -#define NUMBER_PORT_USED 4 >> +#define NUMBER_PORT_USED 16 >> static inline void >> populate_ipv4_many_flow_into_table(const struct rte_hash *h, >> unsigned int nr_flow) >> @@ -416,36 +447,16 @@ >populate_ipv4_many_flow_into_table(const struct rte_hash *h, >> ALL_32_BITS, ALL_32_BITS} }; >> >> for (i = 0; i < nr_flow; i++) { >> + uint8_t port = i % NUMBER_PORT_USED; >> struct ipv4_l3fwd_em_route entry; >> union ipv4_5tuple_host newkey; >> >> - uint8_t a = (uint8_t) >> - ((i/NUMBER_PORT_USED)%BYTE_VALUE_MAX); >> - uint8_t b = (uint8_t) >> - >(((i/NUMBER_PORT_USED)/BYTE_VALUE_MAX)%BYTE_VALUE_MAX); >> - uint8_t c = (uint8_t) >> - >((i/NUMBER_PORT_USED)/(BYTE_VALUE_MAX*BYTE_VALUE_MAX)); >> + uint8_t a = (uint8_t)((port + 1) % BYTE_VALUE_MAX); >> >> /* Create the ipv4 exact match flow */ >> memset(&entry, 0, sizeof(entry)); >> - switch (i & (NUMBER_PORT_USED - 1)) { >> - case 0: >> - entry = ipv4_l3fwd_em_route_array[0]; >> - entry.key.ip_dst = RTE_IPV4(101, c, b, a); >> - break; >> - case 1: >> - entry = ipv4_l3fwd_em_route_array[1]; >> - entry.key.ip_dst = RTE_IPV4(201, c, b, a); >> - break; >> - case 2: >> - entry = ipv4_l3fwd_em_route_array[2]; >> - entry.key.ip_dst = RTE_IPV4(111, c, b, a); >> - break; >> - case 3: >> - entry = ipv4_l3fwd_em_route_array[3]; >> - entry.key.ip_dst = RTE_IPV4(211, c, b, a); >> - break; >> - }; >> + entry = ipv4_l3fwd_em_route_array[port]; >> + entry.key.ip_dst = RTE_IPV4(198, 18, port, a); >> convert_ipv4_5tuple(&entry.key, &newkey); >> int32_t ret = rte_hash_add_key(h, (void *) &newkey); >> >> @@ -469,35 +480,14 @@ >populate_ipv6_many_flow_into_table(const struct rte_hash *h, >> mask2 = (rte_xmm_t){.u32 = {ALL_32_BITS, ALL_32_BITS, 0, 0} }; >> >> for (i = 0; i < nr_flow; i++) { >> + uint8_t port = i % NUMBER_PORT_USED; >> struct ipv6_l3fwd_em_route entry; >> union ipv6_5tuple_host newkey; >> >> - uint8_t a = (uint8_t) >> - ((i/NUMBER_PORT_USED)%BYTE_VALUE_MAX); >> - uint8_t b = (uint8_t) >> - >(((i/NUMBER_PORT_USED)/BYTE_VALUE_MAX)%BYTE_VALUE_MAX); >> - uint8_t c = (uint8_t) >> - >((i/NUMBER_PORT_USED)/(BYTE_VALUE_MAX*BYTE_VALUE_MAX)); >> - >> /* Create the ipv6 exact match flow */ >> memset(&entry, 0, sizeof(entry)); >> - switch (i & (NUMBER_PORT_USED - 1)) { >> - case 0: >> - entry = ipv6_l3fwd_em_route_array[0]; >> - break; >> - case 1: >> - entry = ipv6_l3fwd_em_route_array[1]; >> - break; >> - case 2: >> - entry = ipv6_l3fwd_em_route_array[2]; >> - break; >> - case 3: >> - entry = ipv6_l3fwd_em_route_array[3]; >> - break; >> - }; >> - entry.key.ip_dst[13] = c; >> - entry.key.ip_dst[14] = b; >> - entry.key.ip_dst[15] = a; >> + entry = ipv6_l3fwd_em_route_array[port]; >> + entry.key.ip_dst[15] = (port + 1) % BYTE_VALUE_MAX; >> convert_ipv6_5tuple(&entry.key, &newkey); >> int32_t ret = rte_hash_add_key(h, (void *) &newkey); >> >> @@ -584,7 +574,7 @@ em_parse_ptype(struct rte_mbuf *m) >> hdr_len = rte_ipv4_hdr_len(ipv4_hdr); >> if (hdr_len == sizeof(struct rte_ipv4_hdr)) { >> packet_type |= RTE_PTYPE_L3_IPV4; >> - if (ipv4_hdr->next_proto_id == IPPROTO_TCP) >> + if (ipv4_hdr->next_proto_id == IPPROTO_UDP) > >I don't understand the intention here. Routes are installed for UDP proto, I think this was an unintended substitution mistake, I will fix in next version. Thanks, Pavan. > > >> packet_type |= RTE_PTYPE_L4_TCP; >> else if (ipv4_hdr->next_proto_id == IPPROTO_UDP) >> packet_type |= RTE_PTYPE_L4_UDP; >> @@ -592,7 +582,7 @@ em_parse_ptype(struct rte_mbuf *m) >> packet_type |= RTE_PTYPE_L3_IPV4_EXT; >> } else if (ether_type == >rte_cpu_to_be_16(RTE_ETHER_TYPE_IPV6)) { >> ipv6_hdr = (struct rte_ipv6_hdr *)l3; >> - if (ipv6_hdr->proto == IPPROTO_TCP) >> + if (ipv6_hdr->proto == IPPROTO_UDP) >> packet_type |= RTE_PTYPE_L3_IPV6 | >RTE_PTYPE_L4_TCP; > >Idem. > > >> else if (ipv6_hdr->proto == IPPROTO_UDP) >> packet_type |= RTE_PTYPE_L3_IPV6 | >RTE_PTYPE_L4_UDP; >> -- >> 2.17.1 >> > > >-- >David Marchand