Hi Stephen,
Have you considered supporting LSC interrupts in vmxnet3?
--
Thanks,
Robert
>From: Stephen Hemminger <shemming at brocade.com>
>
>The Intel version of VMXNET3 driver does not handle link state properly.
>The VMXNET3 API returns 1 if connected and 0 if disconnected.
>Also need to return correct value to indicate state change.
>
>Signed-off-by: Stephen Hemminger <stephen at networkplumber.org>
>Acked-by: Yong Wang <yongwang at vmware.com>
>---
> lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c | 54
>++++++++++++++++++++++++---------
> 1 file changed, 39 insertions(+), 15 deletions(-)
>
>diff --git a/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c
>b/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c
>index 6068c60..4c882ee 100644
>--- a/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c
>+++ b/lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c
>@@ -149,9 +149,36 @@ gpa_zone_reserve(struct rte_eth_dev *dev, uint32_t
>size,
> * - On success, zero.
> * - On failure, negative value.
> */
>-static inline int
>-rte_vmxnet3_dev_atomic_write_link_status(struct rte_eth_dev *dev,
>- struct rte_eth_link *link)
>+
>+static int
>+vmxnet3_dev_atomic_read_link_status(struct rte_eth_dev *dev,
>+ struct rte_eth_link *link)
>+{
>+ struct rte_eth_link *dst = link;
>+ struct rte_eth_link *src = &(dev->data->dev_link);
>+
>+ if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
>+ *(uint64_t *)src) == 0)
>+ return -1;
>+
>+ return 0;
>+}
>+
>+/**
>+ * Atomically writes the link status information into global
>+ * structure rte_eth_dev.
>+ *
>+ * @param dev
>+ * - Pointer to the structure rte_eth_dev to write to.
>+ * - Pointer to the buffer to be saved with the link status.
>+ *
>+ * @return
>+ * - On success, zero.
>+ * - On failure, negative value.
>+ */
>+static int
>+vmxnet3_dev_atomic_write_link_status(struct rte_eth_dev *dev,
>+ struct rte_eth_link *link)
> {
> struct rte_eth_link *dst = &(dev->data->dev_link);
> struct rte_eth_link *src = link;
>@@ -384,6 +411,7 @@ vmxnet3_setup_driver_shared(struct rte_eth_dev *dev)
> devRead->misc.driverInfo.vmxnet3RevSpt = 1;
> devRead->misc.driverInfo.uptVerSpt = 1;
>
>+ devRead->misc.mtu = rte_le_to_cpu_32(dev->data->mtu);
> devRead->misc.queueDescPA = hw->queueDescPA;
> devRead->misc.queueDescLen = hw->queue_desc_len;
> devRead->misc.mtu = hw->cur_mtu;
>@@ -570,7 +598,7 @@ vmxnet3_dev_stop(struct rte_eth_dev *dev)
>
> /* Clear recorded link status */
> memset(&link, 0, sizeof(link));
>- rte_vmxnet3_dev_atomic_write_link_status(dev, &link);
>+ vmxnet3_dev_atomic_write_link_status(dev, &link);
> }
>
> /*
>@@ -653,28 +681,24 @@ static int
> vmxnet3_dev_link_update(struct rte_eth_dev *dev, __attribute__((unused))
>int wait_to_complete)
> {
> struct vmxnet3_hw *hw = dev->data->dev_private;
>- struct rte_eth_link link;
>+ struct rte_eth_link old, link;
> uint32_t ret;
>
>+ memset(&link, 0, sizeof(link));
>+ vmxnet3_dev_atomic_read_link_status(dev, &old);
>+
> VMXNET3_WRITE_BAR1_REG(hw, VMXNET3_REG_CMD, VMXNET3_CMD_GET_LINK);
> ret = VMXNET3_READ_BAR1_REG(hw, VMXNET3_REG_CMD);
>
>- if (!ret) {
>- PMD_INIT_LOG(ERR, "Link Status Negative : %s()", __func__);
>- return -1;
>- }
>-
> if (ret & 0x1) {
> link.link_status = 1;
> link.link_duplex = ETH_LINK_FULL_DUPLEX;
> link.link_speed = ETH_LINK_SPEED_10000;
>-
>- rte_vmxnet3_dev_atomic_write_link_status(dev, &link);
>-
>- return 0;
> }
>
>- return -1;
>+ vmxnet3_dev_atomic_write_link_status(dev, &link);
>+
>+ return (old.link_status == link.link_status) ? -1 : 0;
> }
>
> /* Updating rxmode through Vmxnet3_DriverShared structure in adapter */
>--
>2.1.4
>
