Adds "--rxq-share=X" parameter to enable shared RxQ, share if device
supports, otherwise fallback to standard RxQ.
Share group number grows per X ports. X defaults to MAX, implies all
ports join share group 1. Queue ID is mapped equally with shared Rx
queue ID.
Forwarding engine "shared-rxq" should be used which Rx only and update
stream statistics correctly.
Signed-off-by: Xueming Li <xuemi...@nvidia.com>
---
app/test-pmd/config.c | 7 ++++++-
app/test-pmd/parameters.c | 13 +++++++++++++
app/test-pmd/testpmd.c | 20 +++++++++++++++++---
app/test-pmd/testpmd.h | 2 ++
doc/guides/testpmd_app_ug/run_app.rst | 7 +++++++
5 files changed, 45 insertions(+), 4 deletions(-)
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index c0616dcd2fd..f8fb8961cae 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -2713,7 +2713,12 @@ rxtx_config_display(void)
printf(" RX threshold registers: pthresh=%d
hthresh=%d "
" wthresh=%d\n",
pthresh_tmp, hthresh_tmp, wthresh_tmp);
- printf(" RX Offloads=0x%"PRIx64"\n", offloads_tmp);
+ printf(" RX Offloads=0x%"PRIx64, offloads_tmp);
+ if (rx_conf->share_group > 0)
+ printf(" share_group=%u share_qid=%u",
+ rx_conf->share_group,
+ rx_conf->share_qid);
+ printf("\n");
}
/* per tx queue config only for first queue to be less verbose
*/
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 3f94a82e321..30dae326310 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -167,6 +167,7 @@ usage(char* progname)
printf(" --tx-ip=src,dst: IP addresses in Tx-only mode\n");
printf(" --tx-udp=src[,dst]: UDP ports in Tx-only mode\n");
printf(" --eth-link-speed: force link speed.\n");
+ printf(" --rxq-share: number of ports per shared rxq groups, defaults
to MAX(1 group)\n");
printf(" --disable-link-check: disable check on link status when "
"starting/stopping ports.\n");
printf(" --disable-device-start: do not automatically start port\n");
@@ -607,6 +608,7 @@ launch_args_parse(int argc, char** argv)
{ "rxpkts", 1, 0, 0 },
{ "txpkts", 1, 0, 0 },
{ "txonly-multi-flow", 0, 0, 0 },
+ { "rxq-share", 2, 0, 0 },
{ "eth-link-speed", 1, 0, 0 },
{ "disable-link-check", 0, 0, 0 },
{ "disable-device-start", 0, 0, 0 },
@@ -1271,6 +1273,17 @@ launch_args_parse(int argc, char** argv)
}
if (!strcmp(lgopts[opt_idx].name, "txonly-multi-flow"))
txonly_multi_flow = 1;
+ if (!strcmp(lgopts[opt_idx].name, "rxq-share")) {
+ if (optarg == NULL) {
+ rxq_share = UINT32_MAX;
+ } else {
+ n = atoi(optarg);
+ if (n >= 0)
+ rxq_share = (uint32_t)n;
+ else
+ rte_exit(EXIT_FAILURE,
"rxq-share must be >= 0\n");
+ }
+ }
if (!strcmp(lgopts[opt_idx].name, "no-flush-rx"))
no_flush_rx = 1;
if (!strcmp(lgopts[opt_idx].name, "eth-link-speed")) {
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 97ae52e17ec..123142ed110 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -498,6 +498,11 @@ uint8_t record_core_cycles;
*/
uint8_t record_burst_stats;
+/*
+ * Number of ports per shared Rx queue group, 0 disable.
+ */
+uint32_t rxq_share;
+
unsigned int num_sockets = 0;
unsigned int socket_ids[RTE_MAX_NUMA_NODES];
@@ -3393,14 +3398,23 @@ dev_event_callback(const char *device_name, enum
rte_dev_event_type type,
}
static void
-rxtx_port_config(struct rte_port *port)
+rxtx_port_config(portid_t pid)
{
uint16_t qid;
uint64_t offloads;
+ struct rte_port *port = &ports[pid];
for (qid = 0; qid < nb_rxq; qid++) {
offloads = port->rx_conf[qid].offloads;
port->rx_conf[qid] = port->dev_info.default_rxconf;
+
+ if (rxq_share > 0 &&
+ (port->dev_info.dev_capa & RTE_ETH_DEV_CAPA_RXQ_SHARE)) {
+ /* Non-zero share group to enable RxQ share. */
+ port->rx_conf[qid].share_group = pid / rxq_share + 1;
+ port->rx_conf[qid].share_qid = qid; /* Equal mapping. */
+ }
+
if (offloads != 0)
port->rx_conf[qid].offloads = offloads;
@@ -3558,7 +3572,7 @@ init_port_config(void)
port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_NONE;
}
- rxtx_port_config(port);
+ rxtx_port_config(pid);
ret = eth_macaddr_get_print_err(pid, &port->eth_addr);
if (ret != 0)
@@ -3772,7 +3786,7 @@ init_port_dcb_config(portid_t pid,
memcpy(&rte_port->dev_conf, &port_conf, sizeof(struct rte_eth_conf));
- rxtx_port_config(rte_port);
+ rxtx_port_config(pid);
/* VLAN filter */
rte_port->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
for (i = 0; i < RTE_DIM(vlan_tags); i++)
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 5863b2f43f3..3dfaaad94c0 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -477,6 +477,8 @@ extern enum tx_pkt_split tx_pkt_split;
extern uint8_t txonly_multi_flow;
+extern uint32_t rxq_share;
+
extern uint16_t nb_pkt_per_burst;
extern uint16_t nb_pkt_flowgen_clones;
extern int nb_flows_flowgen;
diff --git a/doc/guides/testpmd_app_ug/run_app.rst
b/doc/guides/testpmd_app_ug/run_app.rst
index 640eadeff73..ff5908dcd50 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -389,6 +389,13 @@ The command line options are:
Generate multiple flows in txonly mode.
+* ``--rxq-share=[X]``
+
+ Create queues in shared Rx queue mode if device supports.
+ Group number grows per X ports. X defaults to MAX, implies all ports
+ join share group 1. Forwarding engine "shared-rxq" should be used
+ which Rx only and update stream statistics correctly.
+
* ``--eth-link-speed``
Set a forced link speed to the ethernet port::
--
2.33.0
