Both 'rte_eth_dev_configure()' & 'rte_eth_dev_set_mtu()' sets MTU but
have slightly different checks. Like one checks min MTU against
RTE_ETHER_MIN_MTU and other RTE_ETHER_MIN_LEN.
Checks moved into common function to unify the checks. Also this has
benefit to have common error logs.
Suggested-by: Huisong Li <lihuis...@huawei.com>
Signed-off-by: Ferruh Yigit <ferruh.yi...@intel.com>
---
lib/ethdev/rte_ethdev.c | 82 ++++++++++++++++++++++++++---------------
lib/ethdev/rte_ethdev.h | 2 +-
2 files changed, 54 insertions(+), 30 deletions(-)
diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
index c2b624aba1a0..0a6e952722ae 100644
--- a/lib/ethdev/rte_ethdev.c
+++ b/lib/ethdev/rte_ethdev.c
@@ -1336,6 +1336,47 @@ eth_dev_get_overhead_len(uint32_t max_rx_pktlen,
uint16_t max_mtu)
return overhead_len;
}
+/* rte_eth_dev_info_get() should be called prior to this function */
+static int
+eth_dev_validate_mtu(uint16_t port_id, struct rte_eth_dev_info *dev_info,
+ uint16_t mtu)
+{
+ uint16_t overhead_len;
+ uint32_t frame_size;
+
+ if (mtu < dev_info->min_mtu) {
+ RTE_ETHDEV_LOG(ERR,
+ "MTU (%u) < device min MTU (%u) for port_id %u\n",
+ mtu, dev_info->min_mtu, port_id);
+ return -EINVAL;
+ }
+ if (mtu > dev_info->max_mtu) {
+ RTE_ETHDEV_LOG(ERR,
+ "MTU (%u) > device max MTU (%u) for port_id %u\n",
+ mtu, dev_info->max_mtu, port_id);
+ return -EINVAL;
+ }
+
+ overhead_len = eth_dev_get_overhead_len(dev_info->max_rx_pktlen,
+ dev_info->max_mtu);
+ frame_size = mtu + overhead_len;
+ if (frame_size < RTE_ETHER_MIN_LEN) {
+ RTE_ETHDEV_LOG(ERR,
+ "Frame size (%u) < min frame size (%u) for port_id
%u\n",
+ frame_size, RTE_ETHER_MIN_LEN, port_id);
+ return -EINVAL;
+ }
+
+ if (frame_size > dev_info->max_rx_pktlen) {
+ RTE_ETHDEV_LOG(ERR,
+ "Frame size (%u) > device max frame size (%u) for
port_id %u\n",
+ frame_size, dev_info->max_rx_pktlen, port_id);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
int
rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
const struct rte_eth_conf *dev_conf)
@@ -1463,26 +1504,13 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t
nb_rx_q, uint16_t nb_tx_q,
goto rollback;
}
- /*
- * Check that the maximum RX packet length is supported by the
- * configured device.
- */
if (dev_conf->rxmode.mtu == 0)
dev->data->dev_conf.rxmode.mtu = RTE_ETHER_MTU;
- max_rx_pktlen = dev->data->dev_conf.rxmode.mtu + overhead_len;
- if (max_rx_pktlen > dev_info.max_rx_pktlen) {
- RTE_ETHDEV_LOG(ERR,
- "Ethdev port_id=%u max_rx_pktlen %u > max valid value
%u\n",
- port_id, max_rx_pktlen, dev_info.max_rx_pktlen);
- ret = -EINVAL;
- goto rollback;
- } else if (max_rx_pktlen < RTE_ETHER_MIN_LEN) {
- RTE_ETHDEV_LOG(ERR,
- "Ethdev port_id=%u max_rx_pktlen %u < min valid value
%u\n",
- port_id, max_rx_pktlen, RTE_ETHER_MIN_LEN);
- ret = -EINVAL;
+
+ ret = eth_dev_validate_mtu(port_id, &dev_info,
+ dev->data->dev_conf.rxmode.mtu);
+ if (ret != 0)
goto rollback;
- }
dev->data->mtu = dev->data->dev_conf.rxmode.mtu;
@@ -1491,6 +1519,9 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q,
uint16_t nb_tx_q,
* size is supported by the configured device.
*/
if (dev_conf->rxmode.offloads & DEV_RX_OFFLOAD_TCP_LRO) {
+ overhead_len = eth_dev_get_overhead_len(dev_info.max_rx_pktlen,
+ dev_info.max_mtu);
+ max_rx_pktlen = dev->data->dev_conf.rxmode.mtu + overhead_len;
if (dev_conf->rxmode.max_lro_pkt_size == 0)
dev->data->dev_conf.rxmode.max_lro_pkt_size =
max_rx_pktlen;
ret = eth_dev_check_lro_pkt_size(port_id,
@@ -3437,7 +3468,8 @@ rte_eth_dev_info_get(uint16_t port_id, struct
rte_eth_dev_info *dev_info)
dev_info->rx_desc_lim = lim;
dev_info->tx_desc_lim = lim;
dev_info->device = dev->device;
- dev_info->min_mtu = RTE_ETHER_MIN_MTU;
+ dev_info->min_mtu = RTE_ETHER_MIN_LEN - RTE_ETHER_HDR_LEN -
+ RTE_ETHER_CRC_LEN;
dev_info->max_mtu = UINT16_MAX;
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_infos_get, -ENOTSUP);
@@ -3643,21 +3675,13 @@ rte_eth_dev_set_mtu(uint16_t port_id, uint16_t mtu)
* which relies on dev->dev_ops->dev_infos_get.
*/
if (*dev->dev_ops->dev_infos_get != NULL) {
- uint16_t overhead_len;
- uint32_t frame_size;
-
ret = rte_eth_dev_info_get(port_id, &dev_info);
if (ret != 0)
return ret;
- if (mtu < dev_info.min_mtu || mtu > dev_info.max_mtu)
- return -EINVAL;
-
- overhead_len = eth_dev_get_overhead_len(dev_info.max_rx_pktlen,
- dev_info.max_mtu);
- frame_size = mtu + overhead_len;
- if (mtu < RTE_ETHER_MIN_MTU || frame_size >
dev_info.max_rx_pktlen)
- return -EINVAL;
+ ret = eth_dev_validate_mtu(port_id, &dev_info, mtu);
+ if (ret != 0)
+ return ret;
}
ret = (*dev->dev_ops->mtu_set)(dev, mtu);
diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
index 4d0f956a4b28..50e124ff631f 100644
--- a/lib/ethdev/rte_ethdev.h
+++ b/lib/ethdev/rte_ethdev.h
@@ -3056,7 +3056,7 @@ int rte_eth_macaddr_get(uint16_t port_id, struct
rte_ether_addr *mac_addr);
* };
*
* device = dev->device
- * min_mtu = RTE_ETHER_MIN_MTU
+ * min_mtu = RTE_ETHER_MIN_LEN - RTE_ETHER_HDR_LEN - RTE_ETHER_CRC_LEN
* max_mtu = UINT16_MAX
*
* The following fields will be populated if support for dev_infos_get()
--
2.31.1
