>
> Add inner packet IPv4 hdr and L4 checksum enable options
> in conf. These will be used in case of protocol offload.
> Per SA, application could specify whether the
> checksum(compute/verify) can be offloaded to security device.
>
> Signed-off-by: Archana Muniganti <march...@marvell.com>
> ---
> doc/guides/cryptodevs/features/default.ini | 1 +
> doc/guides/rel_notes/deprecation.rst | 4 +--
> doc/guides/rel_notes/release_21_11.rst | 4 +++
> lib/cryptodev/rte_cryptodev.h | 2 ++
> lib/security/rte_security.h | 31 ++++++++++++++++++++++
> 5 files changed, 40 insertions(+), 2 deletions(-)
>
> diff --git a/doc/guides/cryptodevs/features/default.ini
> b/doc/guides/cryptodevs/features/default.ini
> index c24814de98..96d95ddc81 100644
> --- a/doc/guides/cryptodevs/features/default.ini
> +++ b/doc/guides/cryptodevs/features/default.ini
> @@ -33,6 +33,7 @@ Non-Byte aligned data =
> Sym raw data path API =
> Cipher multiple data units =
> Cipher wrapped key =
> +Inner checksum =
>
> ;
> ; Supported crypto algorithms of a default crypto driver.
> diff --git a/doc/guides/rel_notes/deprecation.rst
> b/doc/guides/rel_notes/deprecation.rst
> index 05fc2fdee7..8308e00ed4 100644
> --- a/doc/guides/rel_notes/deprecation.rst
> +++ b/doc/guides/rel_notes/deprecation.rst
> @@ -232,8 +232,8 @@ Deprecation Notices
> IPsec payload MSS (Maximum Segment Size), and ESN (Extended Sequence
> Number).
>
> * security: The IPsec SA config options ``struct
> rte_security_ipsec_sa_options``
> - will be updated with new fields to support new features like IPsec inner
> - checksum, TSO in case of protocol offload.
> + will be updated with new fields to support new features like TSO in case of
> + protocol offload.
>
> * ipsec: The structure ``rte_ipsec_sa_prm`` will be extended with a new field
> ``hdr_l3_len`` to configure tunnel L3 header length.
> diff --git a/doc/guides/rel_notes/release_21_11.rst
> b/doc/guides/rel_notes/release_21_11.rst
> index 3ade7fe5ac..5480f05a99 100644
> --- a/doc/guides/rel_notes/release_21_11.rst
> +++ b/doc/guides/rel_notes/release_21_11.rst
> @@ -196,6 +196,10 @@ ABI Changes
> ``rte_security_ipsec_xform`` to allow applications to configure SA soft
> and hard expiry limits. Limits can be either in number of packets or bytes.
>
> +* security: The new options ``ip_csum_enable`` and ``l4_csum_enable`` were
> added
> + in structure ``rte_security_ipsec_sa_options`` to indicate whether inner
> + packet IPv4 header checksum and L4 checksum need to be offloaded to
> + security device.
>
> Known Issues
> ------------
> diff --git a/lib/cryptodev/rte_cryptodev.h b/lib/cryptodev/rte_cryptodev.h
> index bb01f0f195..d9271a6c45 100644
> --- a/lib/cryptodev/rte_cryptodev.h
> +++ b/lib/cryptodev/rte_cryptodev.h
> @@ -479,6 +479,8 @@ rte_cryptodev_asym_get_xform_enum(enum
> rte_crypto_asym_xform_type *xform_enum,
> /**< Support operations on multiple data-units message */
> #define RTE_CRYPTODEV_FF_CIPHER_WRAPPED_KEY (1ULL << 26)
> /**< Support wrapped key in cipher xform */
> +#define RTE_CRYPTODEV_FF_SECURITY_INNER_CSUM (1ULL << 27)
> +/**< Support inner checksum computation/verification */
>
> /**
> * Get the name of a crypto device feature flag
> diff --git a/lib/security/rte_security.h b/lib/security/rte_security.h
> index ab1a6e1f65..0c5636377e 100644
> --- a/lib/security/rte_security.h
> +++ b/lib/security/rte_security.h
> @@ -230,6 +230,37 @@ struct rte_security_ipsec_sa_options {
> * * 0: Do not match UDP ports
> */
> uint32_t udp_ports_verify : 1;
> +
> + /** Compute/verify inner packet IPv4 header checksum in tunnel mode
> + *
> + * * 1: For outbound, compute inner packet IPv4 header checksum
> + * before tunnel encapsulation and for inbound, verify after
> + * tunnel decapsulation.
> + * * 0: Inner packet IP header checksum is not computed/verified.
> + *
> + * The checksum verification status would be set in mbuf using
> + * PKT_RX_IP_CKSUM_xxx flags.
> + *
> + * Inner IP checksum computation can also be enabled(per operation)
> + * by setting the flag PKT_TX_IP_CKSUM in mbuf.
> + */
> + uint32_t ip_csum_enable : 1;
> +
> + /** Compute/verify inner packet L4 checksum in tunnel mode
> + *
> + * * 1: For outbound, compute inner packet L4 checksum before
> + * tunnel encapsulation and for inbound, verify after
> + * tunnel decapsulation.
> + * * 0: Inner packet L4 checksum is not computed/verified.
> + *
> + * The checksum verification status would be set in mbuf using
> + * PKT_RX_L4_CKSUM_xxx flags.
> + *
> + * Inner L4 checksum computation can also be enabled(per operation)
> + * by setting the flags PKT_TX_TCP_CKSUM or PKT_TX_SCTP_CKSUM or
> + * PKT_TX_UDP_CKSUM or PKT_TX_L4_MASK in mbuf.
> + */
> + uint32_t l4_csum_enable : 1;
> };
>
> /** IPSec security association direction */
> --
Acked-by: Konstantin Ananyev <konstantin.anan...@intel.com>
> 2.22.0
