Hi Anoob,
> Hi Konstanin,
>
> Please see inline.
>
> Thanks,
> Anoob
>
> > -----Original Message-----
> > From: Ananyev, Konstantin <konstantin.anan...@intel.com>
> > Sent: Wednesday, September 29, 2021 4:26 PM
> > To: Archana Muniganti <march...@marvell.com>; Akhil Goyal
> > <gak...@marvell.com>; Nicolau, Radu <radu.nico...@intel.com>; Zhang, Roy
> > Fan <roy.fan.zh...@intel.com>; hemant.agra...@nxp.com
> > Cc: Anoob Joseph <ano...@marvell.com>; Tejasree Kondoj
> > <ktejas...@marvell.com>; Ankur Dwivedi <adwiv...@marvell.com>; Jerin Jacob
> > Kollanukkaran <jer...@marvell.com>; dev@dpdk.org
> > Subject: [EXT] RE: [PATCH v2 1/3] security: add SA config option for inner
> > pkt
> > csum
> >
> > External Email
> >
> > ----------------------------------------------------------------------
> > > Add inner packet IPv4 hdr and L4 checksum enable options in conf.
> > > These will be used in case of protocol offload.
> > > Per SA, application could specify whether the
> > > checksum(compute/verify) can be offloaded to security device.
> > >
> > > Signed-off-by: Archana Muniganti <march...@marvell.com>
> > > ---
> > > doc/guides/cryptodevs/features/default.ini | 1 +
> > > doc/guides/rel_notes/deprecation.rst | 4 ++--
> > > doc/guides/rel_notes/release_21_11.rst | 4 ++++
> > > lib/cryptodev/rte_cryptodev.h | 2 ++
> > > lib/security/rte_security.h | 18 ++++++++++++++++++
> > > 5 files changed, 27 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/doc/guides/cryptodevs/features/default.ini
> > > b/doc/guides/cryptodevs/features/default.ini
> > > index c24814de98..96d95ddc81 100644
> > > --- a/doc/guides/cryptodevs/features/default.ini
> > > +++ b/doc/guides/cryptodevs/features/default.ini
> > > @@ -33,6 +33,7 @@ Non-Byte aligned data = Sym raw data path API =
> > > Cipher multiple data units =
> > > Cipher wrapped key =
> > > +Inner checksum =
> > >
> > > ;
> > > ; Supported crypto algorithms of a default crypto driver.
> > > diff --git a/doc/guides/rel_notes/deprecation.rst
> > > b/doc/guides/rel_notes/deprecation.rst
> > > index 05fc2fdee7..8308e00ed4 100644
> > > --- a/doc/guides/rel_notes/deprecation.rst
> > > +++ b/doc/guides/rel_notes/deprecation.rst
> > > @@ -232,8 +232,8 @@ Deprecation Notices
> > > IPsec payload MSS (Maximum Segment Size), and ESN (Extended Sequence
> > Number).
> > >
> > > * security: The IPsec SA config options ``struct
> > > rte_security_ipsec_sa_options``
> > > - will be updated with new fields to support new features like IPsec
> > > inner
> > > - checksum, TSO in case of protocol offload.
> > > + will be updated with new fields to support new features like TSO in
> > > + case of protocol offload.
> > >
> > > * ipsec: The structure ``rte_ipsec_sa_prm`` will be extended with a new
> > > field
> > > ``hdr_l3_len`` to configure tunnel L3 header length.
> > > diff --git a/doc/guides/rel_notes/release_21_11.rst
> > > b/doc/guides/rel_notes/release_21_11.rst
> > > index 8da851cccc..93d1b36889 100644
> > > --- a/doc/guides/rel_notes/release_21_11.rst
> > > +++ b/doc/guides/rel_notes/release_21_11.rst
> > > @@ -194,6 +194,10 @@ ABI Changes
> > > ``rte_security_ipsec_xform`` to allow applications to configure SA soft
> > > and hard expiry limits. Limits can be either in number of packets or
> > > bytes.
> > >
> > > +* security: The new options ``ip_csum_enable`` and ``l4_csum_enable``
> > > +were added
> > > + in structure ``rte_security_ipsec_sa_options`` to indicate whether
> > > +inner
> > > + packet IPv4 header checksum and L4 checksum need to be offloaded to
> > > + security device.
> > >
> > > Known Issues
> > > ------------
> > > diff --git a/lib/cryptodev/rte_cryptodev.h
> > > b/lib/cryptodev/rte_cryptodev.h index bb01f0f195..d9271a6c45 100644
> > > --- a/lib/cryptodev/rte_cryptodev.h
> > > +++ b/lib/cryptodev/rte_cryptodev.h
> > > @@ -479,6 +479,8 @@ rte_cryptodev_asym_get_xform_enum(enum
> > > rte_crypto_asym_xform_type *xform_enum, /**< Support operations on
> > multiple data-units message */
> > > #define RTE_CRYPTODEV_FF_CIPHER_WRAPPED_KEY (1ULL << 26)
> > > /**< Support wrapped key in cipher xform */
> > > +#define RTE_CRYPTODEV_FF_SECURITY_INNER_CSUM (1ULL
> > << 27)
> > > +/**< Support inner checksum computation/verification */
> > >
> > > /**
> > > * Get the name of a crypto device feature flag diff --git
> > > a/lib/security/rte_security.h b/lib/security/rte_security.h index
> > > ab1a6e1f65..945f45ad76 100644
> > > --- a/lib/security/rte_security.h
> > > +++ b/lib/security/rte_security.h
> > > @@ -230,6 +230,24 @@ struct rte_security_ipsec_sa_options {
> > > * * 0: Do not match UDP ports
> > > */
> > > uint32_t udp_ports_verify : 1;
> > > +
> > > + /** Compute/verify inner packet IPv4 header checksum in tunnel mode
> > > + *
> > > + * * 1: For outbound, compute inner packet IPv4 header checksum
> > > + * before tunnel encapsulation and for inbound, verify after
> > > + * tunnel decapsulation.
> > > + * * 0: Inner packet IP header checksum is not computed/verified.
> > > + */
> > > + uint32_t ip_csum_enable : 1;
> > > +
> > > + /** Compute/verify inner packet L4 checksum in tunnel mode
> > > + *
> > > + * * 1: For outbound, compute inner packet L4 checksum before
> > > + * tunnel encapsulation and for inbound, verify after
> > > + * tunnel decapsulation.
> > > + * * 0: Inner packet L4 checksum is not computed/verified.
> > > + */
> > > + uint32_t l4_csum_enable : 1;
> >
> > As I understand these 2 new flags serve two purposes:
> > 1. report HW/PMD ability to perform these offloads.
> > 2. allow user to enable/disable this offload on SA basis.
>
> [Anoob] Correct
>
> >
> > One question I have - how it will work on data-path?
> > Would decision to perform these offloads be based on mbuf->ol_flags value
> > (same as we doing for ethdev TX offloads)?
> > Or some other approach is implied?
>
> [Anoob] There will be two settings. It can enabled per SA or enabled per
> packet.
Ok, will it be documented somewhere?
Or probably it already is, and I just missed/forgot it somehow?
> >
> > > };
> > >
> > > /** IPSec security association direction */
> > > --
> > > 2.22.0
