On Mon, Aug 16, 2021 at 07:13:54AM -0600, Thao Hull wrote: > Thank you! Will try that when I get back from vacation. Thao > > On Mon, Aug 16, 2021, 4:48 AM Mikulicz, Szymon (Nokia - PL/Krakow) < > szymon.mikul...@nokia.com> wrote: > > > Hi Thao, > > > > the original issue was resolved by updating pkg-config. I compiled a new > > version of it on our centos 7 setup. We are currently using pkg-config > > 0.29.2 > > and it works. > > > > BR, > > SM > >
The likely cause of the inability to parse the address is the PCI driver not being linked into the binary for a static build. This could indeed be caused by incorrect output from pkg-config, and the default pkg-config on centos 7 is known to have such an issue. Updating pkg-config, or use pkgconf instead, is recommended to fix this, as suggested above. /Bruce > > On 8/13/21 12:32 AM, Thao Hull wrote: > > > > Hi. > > > > This looks similar to the problem I am having. > > https://lore.kernel.org/dpdk-dev/bug-68...@http.bugs.dpdk.org%2F/T/ > > > > I can't figure out how this issue was resolved on Centos7 per the thread. > > Can someone please explain how to get past this failure error? Just like > > this user, testpmd works fine for me. My device is in slot b3:00.0. I am > > using arkville on a bittware FPGA card. My error is slightly different as > > shown below: > > > > EAL: Detected 24 lcore(s) > > EAL: Detected 2 NUMA nodes > > EAL: Detected static linkage of DPDK > > EAL: failed to parse device "b3:00.0" > > EAL: Unable to parse device 'b3:00.0, Pkt_dir=0xF0000, Pkt_gen=./pg.conf' > > > > EAL: Error - exiting with EAL initialization > > > > I'm using dpdk version 21.08.0 > > > > Any thoughts on how to debug, if not fix this? I am new to dpdk. > > > > Thank you! > > Thao > > > >
