On Thu, Jul 15, 2021 at 11:03:08AM +0100, Bruce Richardson wrote:
> On Thu, Jul 15, 2021 at 03:00:01PM +0530, Jerin Jacob wrote:
> > On Thu, Jul 15, 2021 at 2:33 PM Bruce Richardson
> > <bruce.richard...@intel.com> wrote:
> > >
> > > On Thu, Jul 15, 2021 at 12:40:01PM +0530, Jerin Jacob wrote:
> > > > )
> > > > a
> > > >
> > > > On Tue, Jul 13, 2021 at 6:01 PM Chengwen Feng <fengcheng...@huawei.com>
> > > > wrote:
> > > > >
> > > > > This patch introduce 'dmadevice' which is a generic type of DMA
> > > > > device.
> > > > >
> > > > > The APIs of dmadev library exposes some generic operations which can
> > > > > enable configuration and I/O with the DMA devices.
> > > > >
> > > > > Signed-off-by: Chengwen Feng <fengcheng...@huawei.com>
> > > >
> > > > Thanks for v3. Seems like all major items as covered. Some more
> > > > comments below inline.
> > > >
> > > > I would suggest v4 to split the patch like (so that we can review and
> > > > ack each patch)
> > > > 1) Only public header file with Doxygen inclusion, (There is a lot of
> > > > Doxygen syntax issue in the patch)
> > > > 2) 1 or more patches for implementation.
> > > >
> > >
> > > One additional follow-up comment on flags below.
> > >
> > > /Bruce
> > >
> > > >
> > > > > diff --git a/lib/dmadev/rte_dmadev.h b/lib/dmadev/rte_dmadev.h
> > > > > new file mode 100644
> > > > > index 0000000..f6cc4e5
> > > <snip>
> > > > > + enum rte_dmadev_port_type port_type;
> > > > missing doxgen comment for this.
> > > > > + union {
> > > > > + /** For PCIE port
> > > > > + *
> > > > > + * The following model show SoC's PCIE module
> > > > > connects to
> > > > > + * multiple PCIE hosts and multiple endpoints. The
> > > > > PCIE module
> > > > > + * has an integrate DMA controller.
> > > > > + * If the DMA wants to access the memory of host A,
> > > > > it can be
> > > > > + * initiated by PF1 in core0, or by VF0 of PF0 in
> > > > > core0.
> > > > > + *
> > > <snip>
> > > > + /** The pasid filed in TLP packet */
> > > > > + uint64_t pasid : 20;
> > > > > + /** The attributes filed in TLP packet */
> > > > > + uint64_t attr : 3;
> > > > > + /** The processing hint filed in TLP packet */
> > > > > + uint64_t ph : 2;
> > > > > + /** The steering tag filed in TLP packet */
> > > > > + uint64_t st : 16;
> > > >
> > > > We don't support a few attributes like passid, ph, st. Do we need
> > > > the capability of this? or ignore this. In either case, please update
> > > > the doc.
> > > >
> > > > We also support additional flags for allocating LLC flag.
> > > > This is a hint to DMA engine that the cache blocks should be allocated
> > > > in the LLC (if they were not already).
> > > > When the MEM pointer is a destination in DMA operation, the referenced
> > > > cache blocks are allocated into the cache as part of completing the
> > > > DMA (when not already present in the LLC)
> > > > this is helpful if software has to access the data right after dma is
> > > > completed.
> > > >
> > > > Could you add bit or flag for the same?
> > > >
> > >
> > > I wonder if this is the best location for such a flag for LLC vs memory
> > > writes. It would also apply to memory-to-memory transactions, not just for
> > > those done to PCI devices.
> >
> > Ack. it can be used for MEM to MEM
> >
> > > As well as that, I think any flag should default
> > > to "on" rather than "off" since writing to cache rather than DRAM is
> > > generally the desired behaviour, I would think.
> >
> > I think, keeping it is "allocate in LLC" on all transfer will not be good.
> > As large transters polute the LLC and dataplane may not touch the complete
> > data only header. Also in device copy, Adding it LLC there is an
> > additional cost unline MEM-MEM.
> >
> > So IMO, better to add the flag to allow to allocate to LLC as a HINT.
> >
> > > Should it be a per-operation flag, rather than per context?
> >
> > Yes. better it be per-operation as it is the hint.
> >
> Ok. Let's define a new per-op flag for LLC allocation, and keep default
> (without flag) as no-alloc.
[Apologies for self-reply]
Let's also be clear in the documentation for the flag that this is a HINT,
and that drivers may not follow this. That way we don't need to add a
capability flag for it, or to return error from a function which doesn't
support it, etc. etc.
