@Thomas, @Ferruh, I tend to accept it (with minor style fixes),
but I need your opinion on it before doing it.
Thanks,
Andrew.
On 6/29/21 5:27 AM, Huisong Li wrote:
>
> 在 2021/6/14 23:37, Andrew Rybchenko 写道:
>> Summary should start from "ethdev: "
>>
>> Don't forget to include all maintainers in Cc the next time.
>> Just use --cc-cmd or --to-cmd options.
> ok, thanks!
>>
>> Adding Thomas.
>>
>> On 5/8/21 11:00 AM, Huisong Li wrote:
>>> Currently, if dev_configure is not invoked or fails to be invoked, users
>>> can still invoke dev_start successfully. This patch adds a
>>> "dev_configured"
>>> flag in "rte_eth_dev_data" to control whether dev_start can be invoked.
>>
>> In theory there is an indirect condition. If number of configured Tx
>> *and* Rx queues is 0, device is not configured.
>
> That's true. If the framework doesn't have this check, each driver needs
> to do this.
>
> But it's a common thing, and it's probably more reasonable to put it in
> the ethdev layer.
>
>>
>> I have no strong opinion on the topic. Extra flag requires
>> extra housekeeping. Indirect conditions are not always good
>> and could be a subject to change.
>>
>>> Signed-off-by: Huisong Li <lihuis...@huawei.com>
>>> ---
>>> lib/ethdev/rte_ethdev.c | 11 +++++++++++
>>> lib/ethdev/rte_ethdev_core.h | 6 +++++-
>>> 2 files changed, 16 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
>>> index a187976..7d74b17 100644
>>> --- a/lib/ethdev/rte_ethdev.c
>>> +++ b/lib/ethdev/rte_ethdev.c
>>> @@ -1604,6 +1604,8 @@ rte_eth_dev_configure(uint16_t port_id,
>>> uint16_t nb_rx_q, uint16_t nb_tx_q,
>>> }
>>> rte_ethdev_trace_configure(port_id, nb_rx_q, nb_tx_q,
>>> dev_conf, 0);
>>> + dev->data->dev_configured = 1;
>>> +
>>> return 0;
>>> reset_queues:
>>> eth_dev_rx_queue_config(dev, 0);
>>> @@ -1614,6 +1616,8 @@ rte_eth_dev_configure(uint16_t port_id,
>>> uint16_t nb_rx_q, uint16_t nb_tx_q,
>>> dev->data->mtu = old_mtu;
>>> rte_ethdev_trace_configure(port_id, nb_rx_q, nb_tx_q,
>>> dev_conf, ret);
>>> + dev->data->dev_configured = 0;
>>> +
>>> return ret;
>>> }
>>> @@ -1749,6 +1753,13 @@ rte_eth_dev_start(uint16_t port_id)
>>> RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_start, -ENOTSUP);
>>> + if (dev->data->dev_configured == 0) {
>>> + RTE_ETHDEV_LOG(INFO,
>>> + "Device with port_id=%"PRIu16" is not configured.\n",
>>> + port_id);
>>> + return -EINVAL;
>>> + }
>>> +
>>> if (dev->data->dev_started != 0) {
>>> RTE_ETHDEV_LOG(INFO,
>>> "Device with port_id=%"PRIu16" already started\n",
>>> diff --git a/lib/ethdev/rte_ethdev_core.h b/lib/ethdev/rte_ethdev_core.h
>>> index 4679d94..b508769 100644
>>> --- a/lib/ethdev/rte_ethdev_core.h
>>> +++ b/lib/ethdev/rte_ethdev_core.h
>>> @@ -167,7 +167,11 @@ struct rte_eth_dev_data {
>>> scattered_rx : 1, /**< RX of scattered packets is ON(1) /
>>> OFF(0) */
>>> all_multicast : 1, /**< RX all multicast mode ON(1) /
>>> OFF(0). */
>>> dev_started : 1, /**< Device state: STARTED(1) /
>>> STOPPED(0). */
>>> - lro : 1; /**< RX LRO is ON(1) / OFF(0) */
>>> + lro : 1, /**< RX LRO is ON(1) / OFF(0) */
>>> + dev_configured : 1;
>>> + /**< Device configuration state:
>>> + * CONFIGURED(1) / NOT CONFIGURED(0).
>>> + */
>>> uint8_t rx_queue_state[RTE_MAX_QUEUES_PER_PORT];
>>> /**< Queues state: HAIRPIN(2) / STARTED(1) / STOPPED(0). */
>>> uint8_t tx_queue_state[RTE_MAX_QUEUES_PER_PORT];
>>>
>>
>> .
