Can you paste output of /proc/meminfo ?
Regards, NV On Tue, May 25, 2021 at 9:52 PM Truring Team <trurin...@gmail.com> wrote: > Hi Team, > > I am trying to run the dpdk test-pmd application (DPDK 20.11 and DPDK > 21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE > Controller but facing following issues: > > If someone can look into the following logs and help me figure out the > issue? > > > > 1. DPDK 20.11 ( Using 1 GB hugepages) > > gdb ./dpdk-testpmd > > 12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7 > > 12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc. > > 12:45:59.348 §License GPLv3+: GNU GPL version 3 or later > http://gnu.org/licenses/gpl.html > > 12:45:59.349 §This is free software: you are free to change and > redistribute it. > > 12:45:59.349 §There is NO WARRANTY, to the extent permitted by law. Type > "show copying" > > 12:45:59.349 §and "show warranty" for details. > > 12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu". > > 12:45:59.351 §For bug reporting instructions, please see: > > 12:45:59.351 §http://www.gnu.org/software/gdb/bugs/... > > 12:45:59.415 §Reading symbols from > /home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no debugging symbols > found)...done. > > 12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i > > 12:46:11.493 §Starting program: > /home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 -- -i > > 12:46:11.717 §[Thread debugging using libthread_db enabled] > > 12:46:11.719 §Using host libthread_db library "/lib64/libthread_db.so.1". > > 12:46:11.768 §EAL: Detected 6 lcore(s) > > 12:46:11.769 §EAL: Detected 1 NUMA nodes > > 12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)] > > 12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket > > 12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)] > > 12:46:11.792 §EAL: Selected IOVA mode 'PA' > > 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB > > 12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB > > 12:46:11.854 §EAL: Probing VFIO support... > > 12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)] > > 12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)] > > 12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)] > > 12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)] > > 12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)] > > 12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device: > 0000:65:00.0 (socket 0) > > 12:46:11.915 § > > 12:46:11.915 §Program received signal SIGSEGV, Segmentation fault. > > 12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc () > > 12:46:11.916 §Missing separate debuginfos, use: debuginfo-install > glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64 > libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64 > zlib-1.2.7-19.el7_9.x86_64 > > 12:46:14.542 §(gdb) bt > > 12:46:14.548 §#0 0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc () > > 12:46:14.548 §#1 0x0000000000eb811e in ecore_hw_init () > > 12:46:14.549 §#2 0x0000000000ef7397 in qed_slowpath_start () > > 12:46:14.549 §#3 0x0000000000ef0483 in qede_common_dev_init () > > 12:46:14.549 §#4 0x0000000000ef1113 in qede_eth_dev_pci_probe () > > 12:46:14.549 §#5 0x0000000000a4450b in pci_probe () > > 12:46:14.550 §#6 0x00000000009dbc6c in rte_bus_probe () > > 12:46:14.550 §#7 0x00000000009fa91c in rte_eal_init () > > 12:46:14.617 §#8 0x0000000000425db1 in main () > > 12:46:17.052 §(gdb) quit > > 12:46:17.056 §A debugging session is active. > > 12:46:17.056 § > > 12:46:17.057 § Inferior 1 [process 23180] will be killed. > > > > > > 2. *DPDK 21.05:* > > ./dpdk-testpmd -l 0-5 -n4 -- -i > > 12:46:46.257 §EAL: Detected 6 lcore(s) > > 12:46:46.257 §EAL: Detected 1 NUMA nodes > > 12:46:46.258 §EAL: Detected static linkage of DPDK > > 12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket > > 12:46:46.285 §EAL: Selected IOVA mode 'PA' > > 12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0 > > 12:46:46.288 §EAL: No available 2048 kB hugepages reported > > 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device: > 0000:65:00.0 (socket 0) > > 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the MCP > scratch-pad is not configured > > 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized > > 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not initialized! > > 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not > initialized > > 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW > information > > 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed > > 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-0)]qede probe > failed rc -3 > > 12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used > > 12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not created > > 12:46:46.423 §testpmd: No probed ethernet devices > > 12:46:46.461 §Interactive-mode selected > > 12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>: n=187456, > size=2176, socket=0 > > 12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc > > 12:46:46.540 §Done > > > > > > System Information: > > *ethtool -i p2p1* > driver: qede > version: 8.33.0.20 > *firmware-version: mfw 8.24.44.0 storm 8.33.11.0* > expansion-rom-version: > bus-info: 0000:65:00.0 > supports-statistics: yes > supports-test: yes > supports-eeprom-access: no > supports-register-dump: yes > supports-priv-flags: yes > > > > *ethtool -i p2p2 *driver: qede > version: 8.33.0.20 > firmware-version: mfw 8.24.44.0 storm 8.33.11.0 > expansion-rom-version: > bus-info: 0000:65:00.1 > supports-statistics: yes > supports-test: yes > supports-eeprom-access: no > supports-register-dump: yes > supports-priv-flags: yes > > > > > > *lspci -nn | grep Ether* > > 12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and > subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] > > 12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and > subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] > > 12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp. FastLinQ > QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02) > > 12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp. FastLinQ > QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02) > > > > cd /lib/firmware/qed/ > > ls > > 12:48:27.269 §qed_init_values-8.10.9.0.bin > qed_init_values-8.30.12.0.bin qed_init_values_zipped-8.10.5.0.bin > qed_init_values_zipped-8.33.11.0.bin qed_init_values_zipped-8.7.3.0.bin > > 12:48:27.272 §qed_init_values-8.14.6.0.bin > qed_init_values-8.33.12.0.bin qed_init_values_zipped-8.15.3.0.bin > qed_init_values_zipped-8.37.2.0.bin > > 12:48:27.273 §qed_init_values-8.18.9.0.bin > qed_init_values-8.40.33.0.bin qed_init_values_zipped-8.20.0.0.bin > qed_init_values_zipped-8.37.7.0.bin > > 12:48:27.275 §qed_init_values-8.20.0.0.bin > qed_init_values_zipped-8.10.10.0.bin qed_init_values_zipped-8.33.1.0.bin > qed_init_values_zipped-8.4.2.0.bin > > > Best Regards > > Puneet >
