Currently, if dev_configure is not invoked or fails to be invoked, users
can still invoke dev_start successfully. This patch adds a "dev_configured"
flag in "rte_eth_dev_data" to control whether dev_start can be invoked.
Signed-off-by: Huisong Li <lihuis...@huawei.com>
---
lib/ethdev/rte_ethdev.c | 11 +++++++++++
lib/ethdev/rte_ethdev_core.h | 6 +++++-
2 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
index a187976..7d74b17 100644
--- a/lib/ethdev/rte_ethdev.c
+++ b/lib/ethdev/rte_ethdev.c
@@ -1604,6 +1604,8 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q,
uint16_t nb_tx_q,
}
rte_ethdev_trace_configure(port_id, nb_rx_q, nb_tx_q, dev_conf, 0);
+ dev->data->dev_configured = 1;
+
return 0;
reset_queues:
eth_dev_rx_queue_config(dev, 0);
@@ -1614,6 +1616,8 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q,
uint16_t nb_tx_q,
dev->data->mtu = old_mtu;
rte_ethdev_trace_configure(port_id, nb_rx_q, nb_tx_q, dev_conf, ret);
+ dev->data->dev_configured = 0;
+
return ret;
}
@@ -1749,6 +1753,13 @@ rte_eth_dev_start(uint16_t port_id)
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_start, -ENOTSUP);
+ if (dev->data->dev_configured == 0) {
+ RTE_ETHDEV_LOG(INFO,
+ "Device with port_id=%"PRIu16" is not configured.\n",
+ port_id);
+ return -EINVAL;
+ }
+
if (dev->data->dev_started != 0) {
RTE_ETHDEV_LOG(INFO,
"Device with port_id=%"PRIu16" already started\n",
diff --git a/lib/ethdev/rte_ethdev_core.h b/lib/ethdev/rte_ethdev_core.h
index 4679d94..b508769 100644
--- a/lib/ethdev/rte_ethdev_core.h
+++ b/lib/ethdev/rte_ethdev_core.h
@@ -167,7 +167,11 @@ struct rte_eth_dev_data {
scattered_rx : 1, /**< RX of scattered packets is ON(1) /
OFF(0) */
all_multicast : 1, /**< RX all multicast mode ON(1) / OFF(0). */
dev_started : 1, /**< Device state: STARTED(1) / STOPPED(0).
*/
- lro : 1; /**< RX LRO is ON(1) / OFF(0) */
+ lro : 1, /**< RX LRO is ON(1) / OFF(0) */
+ dev_configured : 1;
+ /**< Device configuration state:
+ * CONFIGURED(1) / NOT CONFIGURED(0).
+ */
uint8_t rx_queue_state[RTE_MAX_QUEUES_PER_PORT];
/**< Queues state: HAIRPIN(2) / STARTED(1) / STOPPED(0). */
uint8_t tx_queue_state[RTE_MAX_QUEUES_PER_PORT];
--
2.7.4
