Great! I will try it. Regards,
-- Masafumi OE, NAOJ -----Original Message----- From: Masaru Oki [mailto:m-...@stratosphere.co.jp] Sent: Monday, June 8, 2015 11:32 AM To: Masafumi OE Cc: <dev at dpdk.org> Subject: Re: [dpdk-dev] Intel X552/557 is not working. Hi, I made (unofficial, quick) patch. The code is mostly pulled from FreeBSD. My Ubuntu 14.04 on X10SDV-TLN4F is works fine. http://www.e-neta.jp/~oki/dpdk-ixgbe.diff 2015-06-08 11:19 GMT+09:00 Masafumi OE <masa at fumi.org>: > Hi, > > I'm trying to use X552/X557-AT 10GBASE-T NIC on Xeon-D 1540. However > it did not work properly. > Binding X552/557to PMD for ixgbe is fine but testpmd is not working on > X552/557 because th_ixgbe_dev_init() return Hardware Initialization > Failure:-3. > > Do you have any idea? > > -- > Supermicro X10SDV-TLN4F > Running on CentOS 7.0: > DPDK is getting via git. > -- > $ lspci -nn | grep X55 > 03:00.0 Ethernet controller [0200]: Intel Corporation Ethernet > Connection X552/X557-AT 10GBASE-T [8086:15ad] > 03:00.1 Ethernet controller [0200]: Intel Corporation Ethernet > Connection X552/X557-AT 10GBASE-T [8086:15ad] > > $ ./dpdk_nic_bind.py --status > > Network devices using DPDK-compatible driver > ============================================ > 0000:03:00.0 'Ethernet Connection X552/X557-AT 10GBASE-T' > drv=uio_pci_generic unused=vfio-pci > 0000:03:00.1 'Ethernet Connection X552/X557-AT 10GBASE-T' > drv=uio_pci_generic unused=vfio-pci > > Network devices using kernel driver > =================================== > 0000:05:00.0 'I350 Gigabit Network Connection' if=eno1 drv=igb > unused=vfio-pci,uio_pci_generic *Active* > 0000:05:00.1 'I350 Gigabit Network Connection' if=eno2 drv=igb > unused=vfio-pci,uio_pci_generic > > Other network devices > ===================== > <none> > > -- > $ sudo -s app/testpmd -c 300 -n 4 -- -i --burst=32 --rxfreet=32 > --mbcache=250 --txpt=32 --rxht=8 --rxwt=0 --txfreet=32 --txrst=32 > --txqflags=0xf01 > EAL: Detected lcore 0 as core 0 on socket 0 > EAL: Detected lcore 1 as core 1 on socket 0 > EAL: Detected lcore 2 as core 2 on socket 0 > EAL: Detected lcore 3 as core 3 on socket 0 > EAL: Detected lcore 4 as core 4 on socket 0 > EAL: Detected lcore 5 as core 5 on socket 0 > EAL: Detected lcore 6 as core 6 on socket 0 > EAL: Detected lcore 7 as core 7 on socket 0 > EAL: Detected lcore 8 as core 0 on socket 0 > EAL: Detected lcore 9 as core 1 on socket 0 > EAL: Detected lcore 10 as core 2 on socket 0 > EAL: Detected lcore 11 as core 3 on socket 0 > EAL: Detected lcore 12 as core 4 on socket 0 > EAL: Detected lcore 13 as core 5 on socket 0 > EAL: Detected lcore 14 as core 6 on socket 0 > EAL: Detected lcore 15 as core 7 on socket 0 > EAL: Support maximum 128 logical core(s) by configuration. > EAL: Detected 16 lcore(s) > EAL: VFIO modules not all loaded, skip VFIO support... > EAL: Setting up memory... > EAL: Ask a virtual area of 0x200000 bytes > EAL: Virtual area found at 0x7ff893200000 (size = 0x200000) > EAL: Ask a virtual area of 0xc00000 bytes > EAL: Virtual area found at 0x7ff892400000 (size = 0xc00000) > EAL: Ask a virtual area of 0x7000000 bytes > EAL: Virtual area found at 0x7ff88b200000 (size = 0x7000000) > EAL: Ask a virtual area of 0x200000 bytes > EAL: Virtual area found at 0x7ff88ae00000 (size = 0x200000) > EAL: Requesting 64 pages of size 2MB from socket 0 > ^NEAL: TSC frequency is ~2000000 KHz > EAL: Master lcore 8 is ready (tid=9472d900;cpuset=[8]) > EAL: lcore 9 is ready (tid=8a5fe700;cpuset=[9]) > EAL: PCI device 0000:03:00.0 on NUMA socket 0 > EAL: probe driver: 8086:15ad rte_ixgbe_pmd > EAL: PCI memory mapped at 0x7ff893000000 > EAL: PCI memory mapped at 0x7ff8946f3000 > PMD: eth_ixgbe_dev_init(): Hardware Initialization Failure: -3 > EAL: Error - exiting with code: 1 > Cause: Requested device 0000:03:00.0 cannot be used > > -- > Masafumi OE, NAOJ > >
